Trace analysis of selected benzidine and diaminodiphenylmethane derivates in urine by means of liquid chromatography using precolumn sample preconcentration,UV and electrochemical detection

Summary For the title compounds 4,4-DADPM, MOCA, 3,3-DCB, 4-ADP and 4-ADPA listing on the EPA priority pollutant list, an analytical practicable, reliable, reproducible and sensitive procedure is required. Therefore a new method has been developed for the routine determination of these toxic aromatic amines in urine at the ppb level. The quantitative determination of amines is a suitable procedure of occupationally exposed persons. Urine sample preparation is done using simple liquid-liquid extraction followed by a precolumn enrichment (PRP₁-material; Hamilton). Breakthrough measurements were done using an enrichment column packed with PRP₁ material. The capacities of the studied amines ranged from 21.9mg/g to 96.6mg/g, while influent concentrations differed from 28.3mg/l to 332.0mg/l. The advantages of electrochemical detection regarding to selectivity and sensitivity are clearly indicated in this paper. Separation has been achieved applying reversed-phase-high-performance-liquid chromatography (LiChrosorb RP 18/5m) followed by electrochemical or UV-detection. The detection limits employing an electrochemical detector at a potential of 1 V range from 2.2ng to 12.1ng. UV detection at 254 nm and 280 nm is about 10–100 times less sensitive. Recoveries from spiked water samples at the 5ppb levels were 75% to 96% respectively. The standard deviation of the developed procedure varies from 5.3% to 14%. Day-to-day repeatability is good.     

Synthesis and spectroscopic properties of highly water-soluble perylene derivatives

Most known perylene diimides are lipophilic, with few exceptions of hydrophilic derivatives. Even in the latter case, the compounds have limited water solubility and show a strong tendency to self-aggregation. In this paper we present the synthesis of four new perylene derivatives with three and four basic side chains, obtained by functionalizing the bay-area of perylene. These molecules show great solubility in aqueous media as hydrochlorides and their tendency to self-aggregate is remarkably reduced with respect to the previously synthesized two-chained perylene diimides. Their different spectroscopic properties in various solvents and conditions are reported and discussed.     

Effect of dimethylaminoethyl methacrylate on the graft copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in aqueous medium

Graft copolymerization of an ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) monomer mixture onto water-soluble hydroxypropyl methylcellulose was investigated with potassium persulfate (KPS) as the initiator in an aqueous medium. The effects of introducing DMAEMA onto the graft copolymerization and the properties of the resulting latex that was produced were studied systematically. The optimum conditions for the graft copolymerization in terms of percentage of grafting and grafting efficiency were determined. The graft copolymer was characterized by Fourier transform infrared spectra, elemental analyses, nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering methods. The results suggest that the introduction of the DMAEMA monomer clearly accelerates the initial rate of the graft copolymerization, whereas the grafting parameters decrease significantly with increasing amounts of DMAEMA. These results can be attributed to the relatively large size of the DMAEMA molecule, its redox reaction with KPS, its hydrophilicity in water, and its chain transfer effect. The equilibrium humidity adsorption behavior and acid solubility of graft the copolymer films were also studied.     

Structure of hydroxycinnamic acid derivatives established by high-perfomance liquid chromatography with photodiode-array detection

Summary The present paper describes the development of a method for the differentiation of hydroxycinnamic acid derivatives by HPLC with photodiode-array detection. Furthermore spectral data of the compounds under investigation are given. Whereas p-coumaric acid derivatives are distinguishable from caffeic and ferulic acid derivatives by the positions of their spectrum maxima and their convexity interval value, it is not possible to distinguish between caffeic and ferulic acid derivatives because of overlapping spectrum maxima and convexity interval values.     

Synthesis of a biotinated amphiphile

The synthesis of a biotinated amphiphile assembled from d-(+)-biotin, ethylene diamine as spacer, galactaric acid and 1-dodecylamine was achieved in six steps. The key step was the synthesis of a bisacetonide protected galactaric ester, the structure of which was determined by X-ray analysis. Aminolysis, spacer attachment, coupling with biotin and deprotection led to the amphiphilic galactaramide.     

Study on the reactions of fluoroalkanesulfonyl azides with indole derivatives

The reactions of fluoroalkanesulfonyl azides 1 with different indole derivatives have been studied in detail. Treatment of 1 with equimolar amount of 1,3-dimethylindole 3 in 1,4-dioxane at room temperature afforded 2-(1,3-dimethyl-1,3-dihydro-indolinylidene) fluoroalkanesulfonylimines 5 in moderate to good yields. However, under the same reaction conditions, in the case of 1 with 1,2-dimethylindole 4, the corresponding 2-fluoroalkanesulfonyl (1,2-dimethyl-1H-indol-3-yl)-amide 6 was obtained in moderate yields. In addition, the reactions of 1 and indole 7 gave different products under different conditions. Possible mechanisms of these reactions were proposed.     

Thermal Analysis of Acrylonitrile Polymerization and Cyclization in the Presence of N,N-Dimethylformamide

This paper examines the polymerization of acrylonitrile to poly(acrylonitrile)(PAN), and its cyclization, in bulk form and using N,N-dimethylformamide (DMF) as solvent in which both monomer and polymer are soluble. Thermal analysis of the resultant products after polymerization has been performed by DSC and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). Scanning electron microscopy has been used to study the morphology of the resultant products and after thermal treatments. The DSC thermal curve of PAN-DMF sample is quite different from the PAN bulk sample, showing a single sharp exothermic peak associated with nitrile group polymerization (cyclization) of PAN at lower temperature (240°C) than that of bulk PAN sample (314°C). Cyclization of PAN was confirmed by IR spectroscopy. It was found that the amide molecules are difficult to eliminate completely in the product obtained after the polymerization reaction, even after prolonged heating at 110°C, and remain occluded. The formation of a complex by dipolar bonding is also possible and it is discussed. It is concluded that the amount of heat evolved as well as the temperature interval over which it is released are influenced by the chemical processing of PAN when using DMF as solvent of both monomer and polymer. Pyrolysis of these PAN samples revealed the release of occluded molecules of DMF, and several compounds containing nitrogen produced from the thermal degradation processes. All these results are interesting to know the chemical processing of carbon fibres and activated carbon fibres from PAN modified precursors.This revised version was published online in November 2005 with corrections to the Cover Date.     

Luminarin 9: A new fluorescent reagent for the precolumn derivatizatioin of main volatile and non-volatile N-nitrosamines in RP-HPLC

Summary A sensitive precolumn fluorescence derivatization method for low level detection of the, volatile (N-nitrosodimethylamine and N-nitrosopyrrolidine) and non-volatile N-nitrosamines (N-nitrosoproline and N-nitrosodiethanolamine) an high-performance liquid chromatography was developed. This method is based on the denitrosation of the compounds of interest by a mixture of hydrobromic acid and acetic acid to produce the corresponding secondary amines. These are, then, able to react with, a quinolizinocoumarin derivative (luminarin 9^®) to form highly fluorescent labelled N-nitrosamine derivatives. The structural elucidation of the luminarin 9^® derivatives of N-nitrosoproline and N-nitrosodimethylamine by way of example, were established by liquid chromatography-mass spectrometry (LC-MS) and by direct chemical ionization-mass spectrometry (CI-MS). The separation, derivatization and detection conditioins were optimized for all the studied compounds. The detection limits (signal to noise ratio=3) were between 0.4 and 1.0 pmol injected depending on the compound. The calibration graphs were linear for derivatized amounts in the range of 0.5–40 nmol for N-nitrosodimethylamine and N-nitrosopyrrolidine, 0.4–2- nmol for N-nitrosoproline and 1.0–40 nmol for N-nitrosodiethanolamine. The repeatability (RSD less than 3.5%, n=6) and reproducibility (RSD less than 4.8%, n-6) were satisfactory.     

Structural Analogy Method in Studies of Adamantanes

The potential of the structural analogy method in the topological studies of adamantane derivatives and analogs is demonstrated. The topological and structural characteristics of these compounds are calculated. Chromatographic retention indices were determined experimentally. Correlations between the topological indices and the physicochemical and chromatographic characteristics are investigated.     

Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives

The thermal behaviour of acetanilide (Ac) and two of its analogues, namely the para-ethoxyacetanilide (p-Eto Ac) and the para-bromoacetanilide (p-Br Ac), which are used as analgesics in the pharmaceutical industry was studied with a simultaneous TG/DSC unit. The examined analgesics showed two endothermic DSC peaks due to melting and vaporization. By combining the experimental TG data with the corresponding reference vapour pressure data obtained with the Antoine equation the plot of P versus v was derived. From the slope of this equation the constant k-value was determined for Ac. Then, using the same k-value the vapour pressures of p-Eto Ac and p-Br Ac were determined in the same temperature range. The vaporization enthalpies for all the studied compounds were obtained from different methods and a very good agreement was found. Vaporization follows a zero-order kinetics. The activation energy of vaporization (E_vap) was calculated from the dynamic TG experiments, using the Arrhenius equation.