The Use of Derivative Thermogravimetry to Estimate Degree of Thermal Degradation

It is difficult to estimate the degree of thermal degradation which has taken place in complex parts composed of cellulosics and polymeric insulation unless complete failure has occurred. There is a definite need for a parameter which can quickly and easily measure the relative degree of thermal attack on organic insulation subjected to various known environmental and processing conditions. This paper reports preliminary work using derivative thermogravimetry to perform this function. Derivative thermogravimetric analysis (TGA) was used to produce a value, TGA Index, related to the peak height of the major TGA derivative signal. This TGA Index was found to correlate with the copper number of insulating paper measured after thermal degradation. The application of TGA Index to evaluation of polymer degradation after thermal shock, water absorption, and accelerated UV attack is also discussed. Finally, preliminary studies on the use of derivative TGA to evaluate coatings exposed to various outdoor environments around the country are reported.     

Functional Monomers and Polymers. 145. Synthetic Application Based on the Tautomerism of Polymer-Bound Purine and Pyrimidine Bases

Polymer-bound alkylthiopurine and -pyrimidine bases were prepared and used as the polymeric reagents for the reactions of nitrile, olefin, and enone formation. The corresponding low molecular weight compounds were also prepared for comparison. Differences in the reactivity of these reagents were related to the change in tautomerism of the purine and pyrimidine moieties.     

Attapulgite grafted with polystyrene via a simultaneous reverse and normal initiation atom transfer radical polymerization

The surface grafting of attapulgite (ATP) with polystyrene (PS) was established via a simultaneous reverse and normal initiation atom transfer radical polymerization (SR&NIATRP). 4‐(chloromethyl)phenyltrimethoxysilane (CMPTMS) chemical bounded on the surface of ATP (ATP‐Cl, Cl‐I) was prepared via one‐step self‐assembly. SR&NI ATRP of styrene was conducted using CuCl₂ complex tris(2‐(dimethylamino)ethyl)amine (Me₆‐TREN) as the catalytic system, initiated by 2,2‐azobis(isobutyronitrile) (AIBN) and ATP‐Cl. FT‐IR, XRD, XPS, TGA and TEM data were consistent with the grafting of benzyl chloride groups and PS chains on ATP surface. The controllability of polymerization was investigated by the kinetics behavior under different molar ratio of AIBN and CuCl₂. The obtained polymer possessed a uniform distribution of molecular weights with a lower polydispersity index of 1.2～1.4. The relationship between polymerization on the surface of ATP and in solution was discussed in detail based on TGA data of hybrid particles and GPC trace of free polymer in solution. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1508–1516     

Preparation and characterization of new inorganic–organic hybrid catalyst H3PMo12O40/Hyd‐SBA‐15 and its application in the domino multi‐component reaction

We present novel inorganic–organic hybrid catalyst to accomplish domino multi‐component reaction (MCR) for synthesis of 3‐amino‐2′‐oxospiro[benzo[c]pyrano[3,2‐a]phenazine‐1,3′‐indoline]‐2‐carbonitrile/carboxylate derivatives. This methodology offers remarkable development by easy production of H₃PMo₁₂O₄₀/Hyd‐SBA‐15 in regard to solving the problem of using harsh catalysts, also it demonstrates to be impressive and environmentally friendly in term of low reaction times and high yields.     

Autonomously Propelled Motors for Value‐Added Product Synthesis and Purification

A proof‐of‐concept design for autonomous, self‐propelling motors towards value‐added product synthesis and separation is presented. The hybrid motor design consists of two distinct functional blocks. The first, a sodium borohydride (NaBH₄) granule, serves both as a reaction prerequisite for the reduction of vanillin and also as a localized solid‐state fuel in the reaction mixture. The second capping functional block consisting of a graphene–polymer composite serves as a hydrophobic matrix to attract the reaction product vanillyl alcohol (VA), resulting in facile separation of this edible value‐added product. These autonomously propelled motors were fabricated at a length scale down to 400 μm, and once introduced in the reaction environment showed rapid bubble‐propulsion followed by high‐purity separation of the reaction product (VA) by the virtue of the graphene–polymer cap acting as a mesoporous sponge. The concept has excellent potential towards the synthesis/isolation of industrially important compounds, affinity‐based product separation, pollutant remediation (such as heavy metal chelation/adsorption), as well as localized fuel‐gradients as an alternative to external fuel dependency.     

Dynamic modeling of the morphology of latex particles with in situ formation of graft copolymer

Modification of the polymer–polymer interfacial tension is a way to tailor‐make particle morphology of waterborne polymer–polymer hybrids. This allows achieving a broader spectrum of application properties and maximizing the synergy of the positive properties of both polymers, avoiding their drawbacks. In situ formation of graft copolymer during polymerization is an efficient way to modify the polymer–polymer interfacial tension. Currently, no dynamic model is available for polymer–polymer hybrids in which a graft copolymer is generated during polymerization. In this article, a novel model based on stochastic dynamics is developed for predicting the dynamics of the development of particle morphology for composite waterborne systems in which a graft copolymer is produced in situ during the process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Validation of a novel very large eddy simulation method for simulation of turbulent separated flow

The paper describes the validation of a newly developed very LES (VLES) method for the simulation of turbulent separated flow. The new VLES method is a unified simulation approach that can change seamlessly from Reynolds‐averaged Navier–Stokes to DNS depending on the numerical resolution. Four complex test cases are selected to validate the performance of the new method, that is, the flow past a square cylinder at Re = 3000 confined in a channel (with a blockage ratio of 20%), the turbulent flow over a circular cylinder at Re = 3900 as well as Re = 140,000, and a turbulent backward‐facing step flow with a thick incoming boundary layer at Re = 40,000. The simulation results are compared with available experimental, LES, and detached eddy simulation‐type results. The new VLES model performs well overall, and the predictions are satisfactory compared with previous experimental and numerical results. It is observed that the new VLES method is quite efficient for the turbulent flow simulations; that is, good predictions can be obtained using a quite coarse mesh compared with the previous LES method. Discussions of the implementation of the present VLES modeling are also conducted on the basis of the simulations of turbulent channel flow up to high Reynolds number of Re_τ = 4000. The efficiency of the present VLES modeling is also observed in the channel flow simulation. From a practical point of view, this new method has considerable potential for more complex turbulent flow simulations at relative high Reynolds numbers. Copyright © 2013 John Wiley & Sons, Ltd.     

Study of flame-retardant finishing of cellulose fibres: Organic–inorganic hybrid versus conventional organophosphonate

The aim of this study was to introduce a non-formaldehyde inorganic–organic hybrid sol–gel flame-retardant precursor (SiOP) containing phosphorous, nitrogen, and silicon and to compare its functional properties with those of the conventional formaldehyde-containing organic flame-retardant agent, organophosphonate (OP). SiOP was used at concentrations of 2%, 4%, and 8%, and OP was used at a concentration of 200 g/dm³. Both agents were applied to 100% cotton (CO) woven fabric by the pad-dry-cure method under the appropriate conditions. The presence of the SiOP and OP coatings on the CO fabric was confirmed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The results of the vertical tests of flammability and the thermogravimetric analyses showed that the presence of the SiOP coating changed the thermal degradation pathway of the CO fabric and resulted in an increase in the thermo-oxidative stability of the cellulose fibres. The thermo-oxidative stability was enhanced by the addition of higher amount of dry solids. At comparable dry solids contents, OP preserved significantly greater flame retardancy and thermo-oxidative stability than did SiOP. These results indicated that the SiOP precursor could not act as an effective alternative to the OP agent in the flame-retardant protection of CO fabric.