Strategies for hydrogen storage in metal--organic frameworks

Increased attention is being focused on metal-organic frameworks as candidates for hydrogen storage materials. This is a result of their many favorable attributes, such as high porosity, reproducible and facile syntheses, amenability to scale-up, and chemical modification for targeting desired properties. A discussion of several strategies aimed at improving hydrogen uptake in these materials is presented. These strategies include the optimization of pore size and adsorption energy by linker modification, impregnation, catenation, and the inclusion of open metal sites and lighter metals.     

石墨烯/铂纳米粒子杂化膜测定肾上腺素

利用循环伏安法制备了石墨烯/铂纳米粒子杂化膜修饰电极,并利用该修饰电极研究了肾上腺素（EP）的电化学行为,建立了测定肾上腺素的电化学方法。 分别利用扫描电子显微镜（SEM）和循环伏安法对电极表面的形貌和电化学性能进行了表征。 试验优化了修饰电极制备过程中影响电极性能的条件和EP的测定条件。 试验结果表明,石墨烯/铂纳米粒子修饰电极对肾上腺素有明显的电催化作用。 在pH=5.0的柠檬酸 磷酸氢二钠缓冲溶液中,EP的氧化峰电流与其浓度在4.4×10-8~2.2×10-6 mol/L的范围内呈良好的线性关系。 线性方程为ipa(10 μA)=0.0753c(mol/L)+3.7653×10-5,r=0.9989,检出限为2.2×10-9 mol/L（S/N=3）。 修饰电极表具有良好的重现性,可用于实际样品的测定。     

十三氟辛基修饰的疏水有机-无机杂化二氧化硅膜孔结构、氢气分离及水热稳定性

采用1,2-双(三乙氧基硅基)乙烷(BTESE)和十三氟辛基三乙氧基硅烷(PFOTES)为前驱体,在酸性条件下通过溶胶-凝胶法制备了十三氟辛基修饰的有机-无机杂化SiO2膜材料。利用接触角测量、红外光谱、动态光散射和N2吸附等测试技术分别对膜材料的疏水性、溶胶粒径和孔结构进行表征,并深入研究有支撑膜材料的氢气渗透、分离性能以及长期水热稳定性。结果表明,十三氟辛基修饰后的膜材料由亲水性变成了疏水性,当nPFOTES/nBTESE=0.6时膜材料对水的接触角达到(110.4±0.4)°,膜材料还保持微孔结构,孔径分布在0.5~0.8 nm。氢气在修饰后的膜材料中的输运遵循微孔扩散机理,在300℃时,氢气的渗透率达到8.5×10-7mol·m-2·s-1·Pa-1,H2/CO2,H2/CO和H2/SF6的理想分离系数分别为5.49,5.90和18.36,均高于相应的Knudsen扩散分离因子。在250℃且水蒸气物质的量分数为5%水热环境下陈化250 h,氢气渗透率和H2/CO2的理想分离系数基本保持不变,膜材料具有良好的水热稳定性。     

Chitosan‐Silica Sulfate Nano Hybrid as a Novel and Highly Proficient Heterogeneous Nano Catalyst for Regioselective Ring Opening of Epoxides via Carboxylic Acids

The synthesis and characterization of chitosan‐silica sulfate nano hybrid (CSSNH ) as a novel and efficient heterogeneous nano catalyst involving acid‐base bifunctional activity is described. The catalytic potency and activity of this eco‐friendly catalyst was investigated in regioselective ring opening of epoxides with carboxylic acids to access structurally diverse 1,2‐diol mono‐esters in good to excellent yields. CSSNH catalyst was characterized using different microscopic and spectroscopic techniques encompassing scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption isotherm, and Fourier transform infrared spectroscopy. The green nature, cheapness, efficiency, ease of preparation, handling and reusability of this new catalyst makes this catalyst to be useful for green industrial processes.     

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction combined with ultraviolet‐visible spectrophotometry for the determination of rhodamine 6G and crystal violet in textile wastewater

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction method combined with ultraviolet‐visible spectrophotometry was developed for the determination of selected cationic dyes in textile wastewater. Polypyrrole‐magnetite was used as adsorbent due to its thermal stability, magnetic properties, and ability to adsorb Rhodamine 6G and crystal violet. Dispersive micro‐solid‐phase extraction parameters were optimized, including sample pH, adsorbent amount, extraction time, and desorption solvent. The optimum polypyrrole‐magnetite dispersive micro‐solid phase‐extraction conditions were sample pH 8, 60 mg polypyrrole‐magnetite adsorbent, 5 min of extraction time, and acetonitrile as the desorption solvent. Under the optimized conditions, the polypyrrole‐magnetite dispersive micro‐solid‐phase extraction with ultraviolet‐visible method showed good linearity in the range of 0.05–7 mg/L (R ² > 0.9980). The method also showed a good limit of detection for the dyes (0.05 mg/L) and good analyte recoveries (97.4–111.3%) with relative standard deviations < 10%. The method was successfully applied to the analysis of dyes in textile wastewater samples where the concentration found was 1.03 mg (RSD ±7.9%) and 1.13 mg/L (RSD ± 4.6%) for Rhodamine 6G and crystal violet, respectively. It can be concluded that this method can be adopted for the rapid extraction and determination of dyes at trace concentration levels.     

Scalable Preparation of Photochromic Composite Foils with Excellent Reversibility for Light Printing

Photochromic inks for repeatable light‐printed media have attracted increasing attention owing to the fact that they may be widely applied to reduce the consumption of papers and plastics and conserve the environment. Therefore, it is of practical significance to develop convenient photochromic inks with a low cost and on a large scale. In this study, a simple one‐step hydrothermal route was used to prepare tungsten trioxide (WO₃) nanoparticles, which were further used to make photochromic inks and transparent photochromic films. The obtained transparent photochromic film could rapidly respond to UV light within tens of seconds, then return to its initial state, with different recovery times at different temperatures, and also exhibit good reversible coloration–bleaching effect. A typical polyethylene terephthalate (PET) foil coated with the photochromic ink could also be repeatedly printed with various patterns and displayed excellent rewritable performance over tens of cycles. This study proposes a simple method for widespread applications of WO₃‐based photochromic inks.     

有机-无机杂化配位聚合物{[C12H28N2][(Pb3I8) (DMF)2]•2DMF}n的晶体及电子结构

合成了一种新颖有机-无机杂化配位聚合物{[C₁₂H₂₈N₂] [(Pb₃I₈)(DMF)₂]•2DMF}_n, 并进行了红外、紫外、热重表征, 采用X射线衍射方法确定了晶体结构. 结构解析表明, 整个分子由阳离子(双质子化的N,N'-二丁基哌嗪)及聚阴离子链([(Pb₃I₈)(DMF)₂]_n^2-)组成, 它们之间由静电作用结合在一起形成一维链状配位聚合物. 依据晶体结构数据, 采用Gaussian03程序对产物进行量子化学计算.     

小分子液滴为模板制备有机-无机杂化纳米微胶囊

通过细乳液聚合,在正辛烷液滴外包覆一层苯乙烯与甲基丙烯酸-3-三甲氧基硅丙酯(MPS)的共聚物,制备了有机-无机杂化纳米微胶囊.通过透射电镜和动态光散射粒径仪观测其形态,用红外光谱表征了其分子结构.讨论了聚合方法对微胶囊制备的影响;通过溶度参数的计算和实验验证,发现配方中单体体积分数需小于36%才能得到微胶囊;通过界面自由能模型的计算和动力学分析,说明了微胶囊形成的热力学原因;发现共聚物中MPS的加入有利于微胶囊的形成,但若MPS的含量过大将会导致胶囊塌陷;最后阐明了这种微胶囊制备过程的机理.     

Effect of anion of polyoxometalate based organic–inorganic hybrid material on intumescent flame retardant polypropylene

In this work, 12‐tungestocobaltic acid based organic–inorganic hybrid material, [Bmim]₆CoW₁₂O₄₀ (CoW) was synthesized and applied as a synergist in polypropylene (PP)/intumescent flame retardant (IFR) composites. The flame retardant properties were investigated by the limiting oxygen index (LOI), UL‐94 vertical burning test, thermal gravimetric analyzer (TGA), cone calorimeter and scanning electron microscopy (SEM) etc. The results showed that the PP composites with 16 wt% IFR and 1 wt% CoW achieves the UL‐94 V‐0 rating and gets a LOI value 28.0. However, only add no less than 25 wt% single IFR, can the PP composites obtain the UL‐94 V‐0 rating, which suggests that CoW has good synergistic effects on flame retardancy of PP/IFR composites. In addition, the SEM and cone calorimeter tests indicated the CoW improves the quality of char layer. The rate of char formation has been enhanced also because of the existence of CoW. It is the combination of a better char quality and a high rate of char formation promoted by CoW that results in the excellent flame retardancy of PP/IFR composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Enhancement of water barrier properties and tribological performance of hybrid glass fiber/epoxy composites with inclusions of carbon and silica nanoparticles

Water barrier properties and tribological performance (hardness and wear behavior) of new hybrid nanocomposites under dry and wet conditions were investigated. The new fabricated hybrid nanocomposite laminates consist of epoxy reinforced with woven and nonwoven tissue glass fibers and two different types of nanoparticles, silica (SiO₂) and carbon black nanoparticles (C). These nanoparticles were incorporated into epoxy resin as a single nanoparticle (either SiO₂ or C) or combining SiO₂ and C nanoparticles simultaneously with different weight fractions. The results showed that addition of carbon nanoparticles with 0.5 and 1 wt% resulted in maximum reduction in water uptake by 28.55% and 21.66%, respectively, as compared with neat glass fiber reinforced epoxy composites. Addition of all studied types and contents of nanoparticles improves hardness in dry and wet conditions over unfilled fiber composites. Under dry conditions, maximum reduction of 47.26% in weight loss was obtained with specimens containing 1 wt% carbon nanoparticles; however, in wet conditions, weight loss was reduced by 17.525% for specimens containing 0.5 wt% carbon nanoparticles as compared with unfilled fiber composites. Diffusion coefficients for different types of the hybrid nanocomposites were computed using Fickian and Langmuir models of diffusion. Copyright © 2017 John Wiley & Sons, Ltd.