Thermal Study of the Cr-Mo-O System in Air

The phase diagram of the ternary system Cr-Mo-O in air was established from the results of thermal analysis of mixtures with different initial CrO3 to MoO3 ratios. It was found that MoO3 did not take any chromium oxide into solid solution. The presence of Cr2O3 destabilized MoO3 causing it to decompose to MoO2 in the temperature range 723-958 K depending on the initial Cr/Mo ratio. The decomposition of pure MoO3 MoO2 did not occur in air at any temperature. However, this decomposition took place through the formation of the compound Cr2O3·3MoO3(ss) and its decomposition to Cr2O3·3MoO2(ss). The latter compound has never been reported before and the X-ray data for this compound are given. The previously reported catalytic activity of Cr2O3·3MoO3(ss), at high temperatures, is presumably due to its reduction to Cr2O3·3MoO2(ss). This revised version was published online in July 2006 with corrections to the Cover Date.     

Structures of deoxypeganine salts

The structures of deoxypeganine (DOP) hydrochloride and oxalate were solved by x-ray structure analysis. An infinite chain along the crystallographic c axis was formed in the crystal structure of DOP oxalate. A molecular framework consisting of Cl anions and DOP cation protonated at N1 was found in the structure of unhydrated DOP hydrochloride. The molecular packing of the “host” (DOP cation) was pseudoisostructural in the studied ion-molecular crystals but differed from other known DOP salts. The “guest” molecules (acid anions) in the studied and known DOP salts formed different intermolecular contacts. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 280–283, May–June, 2006.     

催化裂化USY／ZnO／Al2O3脱硫添加剂的高温水热失活

 对USY／ZnO／Al2O3汽油催化裂化脱硫添加剂经高温水热老化处理前后的脱硫性能进行了考察，发现老化后添加剂的脱硫性能大幅度下降．采用XRD和IR等技术对USY／ZnO／Al2O3添加剂在高温和高温水热条件下失活的原因进行了研究．结果表明，在高温下，ZnO可与USY沸石中的铝发生固相反应生成ZnAl2O4尖晶石，从而造成USY晶体结构崩塌，转变成无定形状态．在ZnO含量较高的条件下，ZnO可继续与USY晶体结构崩塌后生成的无定形的硅和铝的氧化物反应，生成Zn2SiO4硅锌矿和ZnAl2O4尖晶石结构．这一方面使添加剂失去了可形成硫化物吸附中心的ZnO，另一方面破坏了硫化物的裂化活性组分USY，从而造成添加剂脱硫性能下降甚至失去脱硫活性．ZnO对USY的破坏作用主要与温度有关．在USY／ZnO／Al2O3体系中，ZnO被ZnO与Al2O3之间形成的锌铝尖晶石膜固定并与USY隔离，单纯的高温条件对添加剂的破坏不显著，而水蒸气可以促进ZnO的移动，有利于ZnO与USY的接触，因此在高温和有水蒸气存 在的条件下添加剂的结构易遭到破坏．     

New palladium nanoclusters. Synthesis,structure, and catalytic properties

The reduction of palladium(ii) carboxylates Pd₃(OCOR)₆ (R = Me, Et, CHMe₂, CMe₃) with hydrogen in alcohol solutions containing 1,10-phenanthroline (phen) and subsequent oxidation with oxygen gave new palladium nanoclusters, mainly particles with a nearly spherical metal core and an average size of 18 . Based on elemental analysis, NMR, X-ray photoelectron spectroscopy, and EXAFS, nanoclusters were described by the idealized formula Pd₁₄₇phen₃₂O₆₀(OCOR)₃₀. The specimens contained up to 25% smaller 55-atomic Pd clusters with a 10 metal core. New nanoclusters catalyze hydrogenation of alkynes and alkenes, reduction of nitriles with formic acid, oxidation of aliphatic and benzylic alcohols, oxidative esterification of ethylene and propylene, and disproportionation of benzyl alcohol into toluene and benzaldehyde.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.     

铈杂多配离子-水滑石超分子层柱材料ZnAl-Ce(PMoV)2的插层组装、表征及催化性能

以十四酸根阴离子柱撑Zn-Al水滑石Zn0.77Al0.22(OH)2.0.22C13H27COO.0.81 H2O(记为ZnAl-14A)为预撑前体,在水溶液中用离子交换法将以2∶17缺位杂多酸根离子(P2Mo16VO61)11-记为(P Mo V)为配体的稀土杂多配阴离子Ce(P2Mo16VO61)219-(记为Ce(PMoV)2)插层组装到水滑石层板间,合成了一种具有大的层间距(3.37 nm)的超分子插层材料Zn0.77Al0.23(OH)2.0.0105[Ce(P1.9Mo15.7V1.1O61)2].0.011C13H27COO.0.83H2O(记为ZnAl-Ce(PMoV)2)。用ICP,IR,XRD和DTA对产物的组成和结构进行了表征。结果表明,该产物中Ce(PMoV)2配阴离子沿其长轴垂直于层板的方向分布于水滑石层间;产物具有规整的层状结构和热稳定性;产物对乙酸与正丁醇的酯化反应,二甘醇的脱水-环化反应和H2O2氧化环己烷的反应有良好的催化性能,且易于回收重复使用。     

Synthesis of (trichloromethyl)organosilanes by catalytic decarboxylation of (trichloroacetoxy)organosilanes

A method for preparing (trichloromethyl)organosilanes by the catalytic decarboxylation of the corresponding trichloroacetoxysilanes RMe₂SiOC(O)CCl₃ (R = Me, ClCH₂, Ph, Me₃Si, and H) has been developed. The method involves heating the starting compounds without a solvent in the presence of a catalyst (quaternary ammonium salts or potassium salts with the addition of crown ethers). Tertiary amines (Et₃N, Bu₃N) catalyze this reaction only when heating is carried out in donor aprotic solvents (THF, acetonitrile) in the presence of oxygen. Thermal decomposition of (trichloroacetoxy)organosilanes, in contrast to catalytic decarboxylation, begins at a higher temperature and yields a mixture of products.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 150–153, January, 1995.     

Compositional Profiles in Silica-Based Sol-Gel Films Doped with Erbium and Silver, by RBS and ERDA

Photosensitive organic-titania hybrid materials have been prepared from metal alkoxides and various organic ester compounds with double bonds. The refractive index of the film increases with the decrease of the concentration of the organic ester compound, and the highest refractive index of 1.62 is obtained when 2-hydroxymethyl acrylate (HOA) is used as the organic ester and the molar ratio of HOA to Ti is 0.5. The material with the highest refractive index is exposed to femtosecond pulse using the multi-beam laser interference technique. After laser irradiation, the irradiated parts of the material are photopolymerized and periodic structures can be obtained by development of the unirradiated parts. In the case of laser irradiation of 120 J total energy for 5 min, the periodic structure obtained corresponds to 2D photonic crystal structure which is composed of two parts; the material with the highest refractive index and the air.     

Complete Oxidation of Methane over Palladium Supported on Alumina Modified with Calcium,Lanthanum,and Cerium Ions

The activity and thermal stability of Pd/Al_2O_3 and Pd/(Al_2O_3 MO_x)(M=Ca,La,Ce) palladium catalysts in the reaction of complete oxidation of methane are presented in this study.The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide.Then they were impregnated with palladium nitrate solution.The catalysts with unmodified alumina had a high surface area.The activity and thermal stability of the alumina- supported catalyst was also very high.The introduction of calcium,lanthanum,or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method.These modifiers decreased the activity of palladium catalysts,and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al_2O_3.The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.