Pyridine-type complexes of transition-metal halides

Manganese(II) chloride complexes with 3,4- and 3,5-lutidine have been prepared. The crystal symmetry and cell dimensions have been calculated on the basis of powder diffraction data. The compounds were characterised also by FT-IR spectrometry. The thermal decomposition of the complexes has been studied by thermogravimetry and DSC. By plotting densities vs. molar mass, the diagram obtained has correspondence to similar observations in other solid metal-lutidine complex systems. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and host-guest properties of pillar[6]arenes

A facile method for the synthesis of pillar[6]arenes was developed.A series of pillar[6]arenes were prepared with FeCl 3 as catalyst and chloroform as solvent at room temperature in moderate yields(30%-40%).Their host-guest properties with n-cetyltrimethyl ammonium bromide were investigated by 1 HNMR.The results showed that high selectivity in the host-guest relationship became apparent between pillar[6]arenes and pillar[5]arenes based on the different size of the inner cavity.     

荧光/磷光混合型白光有机发光二极管的研究

白光有机发光二极管（white organic light-emitting diodes,WOLEDs）在全色显示、固态照明以及背光源等领域有巨大的应用前景,其研究备受关注.其中,荧光/磷光混合型WOLEDs因兼具荧光材料的长寿命和磷光材料的高效率,被认为是目前最有希望实现照明应用的器件结构.荧光/磷光混合型WOLEDs最重要的问题是要解决荧光材料的单线态激子和磷光材料的三线态激子的协同发光.为了避免单线态激子和三线态激子的相互猝灭问题,必须设计有效的器件结构.本文以两种不同三线态能级的蓝光荧光材料为研究对象,介绍了不同高性能荧光/磷光混合型WOLEDs的结构设计与性能.研究表明,载流子传输平衡的高效结构设计和激子分布宽范围内的有效调控是实现高性能荧光/磷光混合型WOLEDs的关键.     

六元瓜环／1，2-乙二胺的超分子化合物结构及相互作用模式

合成了六元瓜环与链状烷基二胺（1,2-乙二胺）形成的超分子化合物．采用X射线衍射技术测定了其晶体结构,并得到元素分析、热重、红外光谱的佐证,揭示了主客体相互作用的模式．还采用^1HNMR技术研究了溶液中六元瓜环与乙二胺的超分子相互作用．研究表明,在不同的环境下瓜环与客体采取相异的超分子作用模式,晶体结构中显示一个六元瓜环的两个端口通过离子偶极作用以不同的作用模式分别跟两个乙二胺客体分子形成一个三单元组成的超分子作用实体;而在溶液中瓜环与乙二胺的相互作用模式与晶体中的不同．     

(SBA-15)-ZnS主-客体纳米复合材料的制备与表征

本研究在SBA-15分子筛孔道中制备了纳米ZnS。Zn_{2+首先通过离子交换交换到SBA-15中,通过水热法在SBA-15分子筛孔道中制备了纳米ZnS。(SBA-15)-ZnS复合物由粉末X-线衍射,傅立叶变换红外光谱,低温氮气吸附-解析附技术,固体扩散漫反射光谱以及发光研究进行了表征。粉末X-线衍射研究说明在制备主-客体纳米复合材料中分子筛骨架未被制备过程所破坏,保持完整且结晶度仍很高。傅立叶变换红外光谱表明制备的材料骨架完好。77 K低温氮气吸附-解析附研究表明所制备的复合材料孔体积,孔尺寸以及表面积相对于SBA-15分子筛降低,证明客体ZnS已成功地组装入分子筛孔道中。所制备的纳米复合材料固体扩散漫反射吸收光谱相对于体相ZnS显示出蓝移表明,ZnS已限制在分子筛的孔道中且复合材料中分子筛的孔道对ZnS具有明显的立体限域效应,ZnS成功地组装在SBA-15分子筛的孔道中。发光研究表明,(SBA-15)-ZnS样品出现明显发光现象。主-客体复合材料具有良好的发光性能,有望在发光材料领域中获得应用。}     

对称四甲基六元瓜环与2-苄基咪唑啉盐酸盐自组装包合物的晶体结构

以2-苄基-咪唑啉盐酸盐(Benid)为客体,对称四甲基六元瓜环(TMeQ[6])为主体,在水溶液中形成自组装包合物(TMeQ[6]-Benid)的晶体.X-射线单晶衍射实验表明,Benid-TMeQ[6]为单斜晶系,空间群P21,晶胞参数:a=1.18633(5) nm,b=2.06145(6) nm,c=1.35163(5) nm,α=90.00°,β=96.102(2)°,γ=90.00°,V=3.28676 nm3,Z=2,Mr=1626.95,Dc=1.569 g·cm-3,μ=0.169 mm-1,R1=0.0739,Wr2=0.1412.通过多种非共价键弱相互作用,主客体以1:1的包结比形成自组装包合物,客体的苯环被包结在主体的空腔内.1H NMR结果进一步证实了在溶液中也是同样的包结模式,包结稳定常数为7.23×105 mol-1·L.     

β-/γ-环糊精与Gemini草酸酯季铵盐的相互作用

本文对新合成的双子草酸酯季铵盐表面活性剂以表面张力法测定了25～45℃范围内的临界胶束浓度(0.6698～0.6099mmol·L-1),并计算了胶束形成的相关热力学参数ΔGm0、ΔHm0、ΔSm0.对其与β-,γ-环糊精(β-,γ-CD)的包结作用进行了研究.β-环糊精与双子草酸酯季铵盐表面活性剂的主客体包结物包结比主要为2:1.实验结果表明,环糊精对双子草酸酯季铵盐的胶束化有显著影响.由于双子草酸酯季铵盐的水链被环糊精的空腔包裹,削弱了其胶束生成的能力,使溶液的表面张力随环糊精浓度的增加而大大增加.     

Crystal structure of the 1 : 4 complex between 18-crown-6 and a polyfunctional guest: 2-hydroxymethyl-4-(1,1,3,3-tetramethylbutyl)phenol

Single crystal X-ray analysis of the 1 : 4 complex between 18-crown-6 and 2-hydroxymethyl-4-(1,1,3,3-tetramethylbutyl)phenol is reported. Crystals of the complex are triclinic witha = 11.929 (2),b = 18.655(2),c = 8.313(1)Å, = 93.14(1), = 94.02(1), = 100.89(1)^o, andD _c = 1.111 g cm^–3 forZ = 1. TheR index is 0.057 for 5935 reflections measured at 293 K. The complex lies on a center of symmetry, the macroring has the Ci symmetry (g ⁺ g ⁺ aag ^– aag ^– ag ^– g ^– aag ⁺ aag ⁺ a). The CH₂-OH group at theortho position to the phenolic OH lies near the benzene ring plane; this conformation differs from the one found for uncomplexed phenol-alcohol molecules. The packing is characterized by layers of hydrogen bonded entities parallel toac; alongb the layers are stabilized by van der Waals interactions.     

Desymmetrized Leaning Pillar[6]arene

In this work, a novel version of macrocyclic arenes, namely leaning pillar[6]arenes, was discovered and it can be considered as a tilted version of a pillar[6]arene with two hydroxy/alkoxy functionalities removed. Through a facile two‐step synthetic approaches, in conjunction with a diversity of post‐modification possibilities, a series of leaning pillar[6]arenes, with good cavity adaptability and enhanced guest‐binding capability, was synthesized, and their self‐assembly in single‐crystal states is presented. DFT calculations demonstrated that the lower rotational barrier of unsubstituted phenylene rings, the uneven electron density centered at the leaning phenyl rings, and the polarization effect along the edge generated by the hydrogen‐bond‐induced orientation of hydroxy groups greatly affected the host‐guest properties, and meanwhile provided an intuitive explanation for the pillar‐like and rigid structure of traditional pillar[6]arenes. Significantly, the crystal structure of cyclo‐oligomeric quinone was obtained by direct oxidation of leaning pillar[6]arenes.