热粘性对发动机排气管道中噪声传播的影响

声波在气体中传播时,气体的热粘性效应会使声波产生一定程度的衰减,且气体的声吸收系数随温度的升高而增大。由于发动机的排气温度较高,热粘性效应引起的排气管道中的噪声衰减应加以考虑。基于准平面波理论,首次计算了考虑热粘性效应时不同温度、流速和管道尺寸下排气管道中的传递损失,分析了各参数对管道中噪声衰减的影响。结果表明,随着温度和频率的升高热粘性声衰减增强,而气流流速和管道直径的增加会降低直管中的热粘性声衰减。对于简单膨胀腔,传递损失的预测结果表明,热粘性效应使通过频率处的声衰减有所改善。     

有限区域风场分解方法及其在台风SAOMEI研究中的应用

介绍了有限区域水平风场分解的调和-余弦计算方法,该方法把函数分成两部分之和.第一部分是Laplace方程在给定边界条件下的解,由于Laplace方程的解是调和函数,这个部分可称为调和部分,又因为其与区域内部值无关,也称外部部分.第二部分是原始函数与调和部分之差,这个函数是齐次边条件下Poisson方程的解,只与区域内部的涡度或散度有关,故称为内部部分,可以展开成双傅氏的余旋函数系列.调和-余弦计算方法的求导都是用谱系数进行,计算精度比常用的差分方法高两阶以上.而且,由于外部部分对应的边界条件物理意义清楚,边界光滑,成功克服了有限区域流函数和速度势迭代求解出现的计算不稳定、原始风场无法还原、边界上的系统缺失等问题,可以准确分解和重建有限区域的风场.利用NCEP/NCAR 1°×1°的实时分析资料和日本气象厅区域谱模式(RSM)20km分辨率的再分析资料,利用调和-余弦算法得到的无辐散风分量和无旋风分量,对2006年的8号超强台风“桑美"(SAOMEI)进行风场结构的比较分析.结果发现,低层无辐散风比原始风场与台风中心的对应关系更好;同时,无旋风分量能更好地显示原始风场上并不明显的低层辐合高层辐散的特征,大尺度无辐散风分量可以更清晰地显示出台风的水汽输送通道.从与台风中心的对应关系看,台风在海上发展阶段,SAOMEI台风的旋转中心与辐合中心并不是时时重合,这个特点只能通过风场分解才能得到.此外,SAOMEI登陆以后,南部洋面上发展起来的对流活动从水汽和能量补充方面都不利于SAOMEI的维持.可见,分解后的无辐散风场和无旋风场能更清楚地体现出SAOMEI的风场结构,在台风结构分析中有重要的推广应用价值. 关键词： 台风 水平风场分解 调和-余弦算法     

分离式螺旋热管蓄冰过程动态特性模拟

在提出分离式螺旋热管蓄冷空调系统的基础上,建立了螺旋热管蒸发段蓄冰过程的理论模型,分析了单位时间内管外结冰厚度、管外冰层厚度、蓄冰率、单位时间蓄冷量以及系统总蓄冷量随时间的变化关系,并对三种不同管径的螺旋热管的蓄冰特性进行了分析研究,研究结果表明在螺旋热管曲率半径相同的条件下,增大管径可以提高系统的单位时间蓄冷量。     

静电聚结技术在油水分离中的研究及应用进展

静电聚结技术具有快速、清洁、高效的特性,通常不需要添加化学药剂,不产生附加污染物,同重力沉降等方法相比,对于小粒径水滴或油水界面稳定的油水混合液适应性更强。本文简要介绍了静电聚结技术的聚结原理,总结了传统电脱水技术、管式静电预聚结技术和容器内置式静电聚结技术(VIEC)的研究和应用进展,对比分析了三类静电聚结技术的适用领域及技术特点,介绍了静电聚结与湍流/剪切流耦合技术的研究现状,最后对静电聚结技术的发展方向进行归纳和展望。     

Development and characterization of bottom-viewed inductively coupled plasma-atomic emission spectrometry

In bottom-viewed inductively coupled plasma-atomic emission spectrometry (BV-ICP-AES), emission from the central channel of the plasma is measured axially from the bottom of the plasma. A straight quartz tube was used as a hollow light pipe (HLP) to collect plasma emission in this study. The HLP also serves as an injector for aerosols transport and injection into the ICP. The optical characteristics of HLPs with the original reflective surface and roughened outer surface are reported. The roughened HLP is effective in rejecting light beams that are not in line with the HLP. The transmission efficiency of the HLP, however, is high (> 70%) for light beams from a source that has the same dimension as the entrance of the HLP and is flush with the HLP. The HLP is effective in rejecting background emission from the core of the plasma that encircles the plasma central channel and yet efficient in light collection from the central channel of the plasma.     

Dispersion and attenuation by transmission,reflection, and mode conversion in welded pipes

Torsional wave dispersion and attenuation in an open empty welded pipe are determined from a multi-receiver position reflection experiment. The fundamental torsional wave is dominantly reflected at the free end and the converted non-axisymmetric flexural modes are naturally attenuated. The resulting phase velocity contours are in agreement with theoretical predictions. The transmission losses are quantified and compared to those reflective elements associated with end and weld reflection. At any reflective node, the incident wave is split between back and forward preserved mode scattering (“reflection/transmission”), conversion to other modes plus energy lost by absorption. The ratios for each element are quantified.     

Abnormality in using cyclic fatigue for ranking static fatigue induced slow crack growth behavior of polyethylene pipe grade resins

Slow crack growth behavior in polyethylene pipe grade resins were studied using both static fatigue (stress-rupture) and cyclic fatigue tests. This was done to better understand the applicability of cyclic fatigue in the prediction of slow crack growth ranking determined from the static fatigue test. In all polyethylene pipe grade resins tested at 80 °C, reduced crack growth failure times were exhibited when the cyclic fatigue test was employed. However, when applied to rank the resins through their slow crack failure times, the cyclic fatigue results did not always confirm those obtained from the static fatigue test. That is, in some cases, a resin with higher slow crack resistance ranking (longer failure times) than another resin in static fatigue exhibited lower ranking (shorter failure times) in the cyclic fatigue test. This abnormality of reversal in ranking is not a general observation but does occur. Based on the data obtained so far, when resins with smaller differences between static fatigue and cyclic fatigue slow crack growth failure times are compared with those resins having larger differences, the chances of correctly predicting the ranking obtained from static fatigue using cyclic fatigue tend to decrease. Hence, it is suggested that one needs to practice caution when using cyclic fatigue to predict the static fatigue ranking of resins for slow cracking resistance. Some insight into the cause of such abnormality is discussed with reference to creep-fatigue interactions.     

基于扩展有限元的页岩水平井多裂缝模拟研究

页岩储层水平井分段多簇压裂簇间距优选是压裂技术的关键,建立了水力压裂流固耦合数学模型,基于扩展有限单元法模拟多条裂缝的扩展过程,研究多条裂缝同时扩展的转向规律,以及应力干扰、水平主应力差、裂缝间距等因素与裂缝转向角度的关系.结果表明:应力干扰作用对裂缝宽度具有限制作用,单条裂缝张开宽度比两条裂缝的大;裂缝转角随应力差的减小而增大,随压裂时间的增加而增大.簇间距越小,应力干扰越强,转角越大,综合主缝均匀扩展、支撑剂填充以及复杂裂缝网络形成等条件,确定最优簇间距为30~40 m.多条裂缝同时扩展时,中间裂缝会受到两边裂缝的限制作用,簇间距越小,限制作用越强,裂缝发育时间越长,扩展速度越慢.     

Almost analytic solutions and their tests of the horizontal diffusion equation for the movement of water in unsaturated soil

Itisalwaysdifficulttofindthesolutionsoftheequationforthemovementofwaterinunsaturatedsoi1.Theprimar}'reasonisthatthehydraulicconductivityK(T)orthediffusivityofsoiIwaterD(o)isfunctionofwaterpotential(W)orwatercontent'(o)'Atpresent,thegeneralwaystofindthesol…     

非牛顿流体在环管内的不定常旋转流

本文研究幂律非牛顿流体在环管内的不定常旋转流。该方程是一非线性方程,在部分因子的稳态近似假设之下,方程被线性化,用Laplace积分变换法我们获得了问题的解。文中给出了几组解曲线,它反映了角向速度的时间演化规律与空间分布特征。另外我们专门研究了幂律指数对流场的影响,该参数的敏感性具有一定的数值界限。这一结果,在有关的工程设计中具有重要的意义。