A History of Fischer-Tropsch Wax Upgrading at BP—— from Catalyst Screening Studies to Full Scale Demonstration in Alaska

Conversion of Fischer-Tropsch wax into high quality synthetic crude or finished transportation fuels such as premium diesel has been studied over the past 15 years within BP. Catalyst screening and selection was carried out in dedicated micro-reactors and pilot plants, whose designs are critical to the performance selection. Variation in catalyst composition and defining the gas to oil feed ratios with the operating temperature are a few of the parameters studied. Product selection and maximizing diesel yield combined with stability (catalyst life) were the ultimate drivers. The selected catalyst was then tested under commercial conditions in a dedicated 300 barrel per day demonstration plant. The products were also tested in engines to assess their combustion characteristics.     

Experimental Evaluation of the Additive Compounds Performance on Asphaltene Precipitation Using Automatic Titration Method

The use of soluble amphiphiles oil types provide the most practical and economical solution for crude oil treatment in order to control the asphaltene precipitation phenomenon. In this article, the inhibition performance of a number of new chemical additives to asphaltene precipitation is examined on two types of Iranian crude oil. An automatic titration method is used in experimental evaluation. The vegetable oil types (hazelnut, wheat germ, and walnut), organic acids (oleic and linoleic) and chemical additives (4-dodecylresorcinol and benzyl alcohol) displayed the highest capacity to inhibit asphaltene precipitation. A remarkable onset displacement is displayed by dodecyl resorcinol. The results also revealed that the vegetable oil have high potential in delaying asphaltene precipitation.     

Investigation of the complexation of essential oil components with cyclodextrins

The formation of inclusion complexes of six essential oil (EO) components (β-caryophyllene, cis-ocimene, trans-ocimene, sabinene hydrate (thujanol), γ-terpinene and α-terpineol) with six cyclodextrins (CDs) (α-CD, β-CD, γ-CD, HP-β-CD, RAMEB and CRYSMEB) was investigated by using static headspace-gas chromatography and UV–visible spectroscopy. Retention studies showed that CDs could efficiently reduce the volatility of EO components except for β-caryophyllene with α-CD. In this case, no inclusion complex was detected while for other compounds the formation of 1:1 inclusion complexes was observed. Results revealed that the inclusion stability mainly depends on geometric complementarity between encapsulated molecule and CD's cavity. Molecular modelling was used to investigate the complementarities between host and guest. Thus, CDs could efficiently be regarded as promising encapsulants for EO components leading to improve their application in cosmetic, pharmaceutical and agriculture fields.     

重度原油注空气低温氧化过程研究(英文)

低温氧化反应对现场燃烧(ISC)技术点火的成功有十分重要的影响.采用高压氧化管,研究了不同温度压力下,新疆克拉玛依重度原油的低温氧化过程.结果表明,温度和压力的变化对低温氧化反应的放热程度、持续时间以及气体产物有明显影响.适合油样低温氧化反应的温度和压力分别为150℃和10MPa.此外,采用纯组分替代原油族组分进行低温氧化实验,研究低温氧化反应对原油族组分(饱和烃、芳香烃、胶质、沥青质)含量的影响.结果表明,原油所含族组分中,芳香烃组分最易被氧化,其含量由氧化前的19.17%减少到12.38%(150℃)和9.51%(250℃).随着低温氧化过程的进行,结构复杂的族组分(胶质、沥青质)的含量明显增加.实验数据对油藏实施注空气技术,以及该技术现场实施条件的确定有十分重要的指导意义.     

Phytochemical Investigation by Microwave‐Assisted Extraction of Essential Oil of the Leaves of Walnut Cultivated in Algeria

Walnut (Juglans regia L.) leaves are used traditionally as an herbal tea indicated for non‐insulin‐dependent diabetics. In recent years, the type‐II diabetes is occurring worldwide with increasing frequency. Thus, there is an urgent need to explore the new beneficial biomolecules on the human health. Our objective was to investigate, for the first time, the volatiles profile of Juglans regia L. leaves from Algiers region. The extraction of essential oil of fresh plant material was performed by microwave‐assisted hydrodistillation (MAHD), for the first time, a relatively recent method, then by the conventional hydrodistillation technique (HD) for comparison. The collected extracts were analyzed by GC‐FID and GC/MS using two capillary columns with different polarity. Extraction time of 1 h by MAHD provided higher yields (0.050±0.001% (w/w)) than by HD (0.030±0.006% (w/w)) after 3 h. A total of 38 compounds were identified using both techniques. Essential oils had similar qualitative but different quantitative composition in terms of chemical compounds. The MAHD method improved yield while reducing the extraction time. The sesquiterpenes were the dominant family in both MAHD and HD essential oils with β‐caryophyllene being the major constituent. Monoterpenes, including hydrocarbon and oxygenated, prevail in HD volatile fraction with β‐pinene and eucalyptol, respectively, as major components.     

Preparation the Esters of Oleic Acid-Maleic Anhydride Copolymer and Their Evaluation as Flow Improvers for Waxy Crude Oil

Five comb-like copolymers derived from oleic acid-maleic anhydride were prepared and then esterified by long-chain fatty alcohol (POMA C_n), where n = 18, 20, 22. These polymers were characterized by FTIR and ¹H NMR analysis. The molecular weight was determined by using gel permeation chromatography (GPC). The prepared copolymers were investigated as flow improvers and pour point depressants (PPD) for crude oil. From the evaluation, it was found that, the maximum depression of PP was obtained by (POMA₂ C₂₂) with long-chain alcohol (C₂₂–OH) from 27°C to 15°C (ΔPP_3000ppm = ?12°C). On the other side, it was remarked that no depression obtained by (POMA₂ C₁₈), which esterified by alcohol (C₁₈–OH) at the same condition. The depression of pour point effectiveness was discussed on the light of polymers structure, molecular weights, and their concentrations. By analysis the results of the rheological flow properties, it was found that the POMA₂ C₂₂ enhanced the Bingham yield values (τ_β). The τ_β for crude oil without additives against 15, 27, and 39°C were 0.286, 0.131, and 0.075 Pa respectively, whereas the τβ for the treated crude oil with POMA₂ C₂₂ were 0.027, 0.022 and 0.010 Pa at 3000 ppm at the same temperatures. By using the photomicrography analysis, it was found that, the wax morphology was greatly modified to fine dispersed crystals of compact size.     

Mathematical Modeling and Simulation of Corrosion Processes in Nigerian Crude Oil Pipelines

In this work, a corrosion prediction mathematical model for risk assessment in oil and gas production and transportation facilities has been created. This work focuses on partial pressure of carbon (iv) oxide, CO₂ and the operating temperature in process equipment and transportation facility pipes as a function of corrosion rate. The model equation formulated was based on the principle of multiple linear regressions of data. The final model representing the corrosion rate of crude oil equipment was obtained CR = b _o + b ₁ T + b ₂ P (CO ₂). The model was simulated using polymath software. The correlation between the experimental and simulated resulted obtained using root mean square deviation (coefficient of determination) was 99.74% which is high, suggesting that the relationship between the predictor and response variables is linear. The variation in the model equation is 0.0066374. This low value of the variance shows that the model is accurate.     

Polymers-Copolymer as Flow Improvers for Fuel Oils and Their Electrical Conductivity

In order to find efficient cold flow improvers for fuel oil, polymethylmethacrylate (PMMA), polystyrene (PS), and a copolymer [styrene (S)–methylmethacrylate (MMA) were prepared. The structure of these polymers and the copolymer were characterized by infrared spectral analysis and their molecular weights were measured. These polymers-copolymer were used as additives for fuel oils in order to lower their pour point. Accordingly, they were evaluated as flow improvers for fuel oil. The results indicated that PMMA possesses less performance as pour point depressant. While the addition of PS and the copolymer (S–MMA) yield excellent pour point depressants for fuel oil. Upon studying the prepared additives and their properties, it was found that the electrical properties of the copolymer were changed due to the presence of polar ion in MMA effect on the electrical properties. The highest electrical conductivity was found when styrene:MMA molar ratio was 1:1.     

Rheological Properties of Model and Crude Oil Systems when Wax Precipitate under Quiescent and Flowing Conditions

Wax precipitation and deposition is a recurring challenge in transportation of crude oil, and increased knowledge about the behavior of such systems is necessary. Microscopy and differential scanning calorimetry were used to follow the crystallisation of wax for two model systems. The amount of solid was also determined by the latter method as well. The flow and viscoelastic behavior were investigated around the wax precipitation temperature, and the yield stress was determined both after dynamic and static cooling. Interpretation of the results was carried out in view of crystal growth and microstructure of the wax crystals. The variables that were studied were wax composition, amount of wax and thermal and shear history.