纳米粒子驱动受限环境下两嵌段共聚物/均聚物混合体系的自组装行为

采用含时金兹堡-朗道理论(time-dependent ginzburg-landau theory,简称TDGL)方法研究了纳米粒子(nanoparticles,简称NPs)掺杂的两嵌段共聚物/均聚物(AB/C)共混体系在球形受限下的自组装行为.在不同球形受限条件下,两嵌段共聚物/均聚物共混体系形成了多种丰富的形貌,如双螺旋结构、单螺旋结构、层状结构和洋葱环状结构等.当在以上前3种体系中掺杂纳米粒子后,体系结构发生了很大的变化.详细研究了纳米粒子的浓度和浸润强度对以上结构的影响.研究结果表明,通过调控纳米粒子的浓度和浸润性质,该共混体系实现了双螺旋结构→层状结构,单螺旋结构→双螺旋结构,层状结构→单螺旋结构等多种取向序的转变.对于洋葱环状结构,纳米粒子的加入对体系这一结构的影响不大.     

Periodic organic–organometallic microdomain structures in poly(styrene‐block‐ferrocenyldimethylsilane) copolymers and blends with corresponding homopolymers

A series of poly(styrene‐block‐ferrocenyldimethylsilane) copolymers (SF) with different relative molar masses of the blocks were prepared by sequential anionic polymerization. The bulk morphology of these polymers, studied by TEM and SAXS, showed well‐ordered lamellar and cylindrical domains as well as disordered micellar structures. Temperature‐dependent rheological measurements exhibited an order–disorder transition for SF 17/8 (the numbers refer to the relative molar masses in 10³ g/mol) between 170 and 180°C, and an order–order transition for SF 9/19 between 190 and 200°C. The morphologies of binary blends of the diblocks with homopolymer were also investigated. In the blends the molar mass of the homopolymer was always less than the molar mass of the matching block. Ordered spheres on a bcc lattice and double‐gyroid morphology were observed for the blends. The double‐gyroid morphology was found only in F‐rich diblock/homopolymer systems. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1009–1021, 1999     

APS引发制备高分子量PDMDAAC

以已知杂质种类和含量的一步法工业二甲基二烯丙基氯化铵(DMDAAC)单体水溶液为原料,用过硫酸铵(APS)为引发剂,采取低温一次性加入引发剂,分阶段升温方式进行聚合反应,通过合成工艺的优化方法,得到了最高特性黏数值为3.17 dL/g的聚二甲基二烯丙基氯化铵(PDMDAAC),单体转化率为94.8%,采用NMR、IR光谱测试技术对产物进行了结构表征。分别考察了DMDAAC质量分数为57.5%~70.0%、APS与DMDAAC质量比为0.15∶100~0.40∶100、Na4EDTA与DMDAAC质量比为0~0.014 2∶100、聚合反应引发温度T1在40~50℃、聚合反应熟化温度T3在50~90℃范围内的以上5个因素对产物特性黏数和单体转化率的影响规律。结果表明,DMDAAC质量分数为65.0%、APS与DMDAAC质量比为0.35∶100、Na4EDTA与DMDAAC质量比为0.007 1∶100、T1为46℃、T2为50℃,T3为70℃,各反应3 h为最佳工艺条件。     

Composite ultrafiltration membranes with tunable properties based on a self‐assembling block copolymer/homopolymer system

Composite ultrafiltration membranes were fabricated by coating a thin film of self‐assembling polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) block copolymers and poly(acrylic acid) homopolymers on top of a support membrane. Block copolymers self‐assembled into a nanostructure where the minority component forms cylinders, whereas homopolymers reside in the core of the cylinders. Selective removal of the homopolymers led to the formation of pores. The morphology of the polymer layer was controlled by varying the content of homopolymers or polymer concentration of the coating solution, which led to membranes with different molecular weight cutoffs (MWCOs) and permeabilities. Uniform pores were obtained using low homopolymer contents, whereas high homopolymer contents caused macrophase separation and resulted in large polydisperse pores or craters at the surface. The thickness of the block copolymer film also influenced the structure and performance of the membranes, where a thicker film results in a strong decrease in permeability but a lower MWCO. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1546–1558     

Synthesis and characterization of 4‐arm star side‐chain liquid crystalline polymers containing azobenzene with different terminal substituents via ATRP

4‐Arm star side‐chain liquid crystalline (LC) polymers containing azobenzene with different terminal substituents were synthesized by atom transfer radical polymerization (ATRP). Tetrafunctional initiator prepared by the esterification between pentaerythritol and 2‐bromoisobutyryl bromide was utilized to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) and 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate (EMAzo), respectively. The 4‐arm star side‐chain LC polymer with p‐methoxyazobenzene moieties exhibits a smectic and a nematic phase, while that with p‐ethoxyazobenzene moieties shows only a nematic phase, which derives of different terminal substituents. The star polymers have similar LC behavior to the corresponding linear homopolymers, whereas transition temperatures decrease slightly. Both star polymers show photoresponsive isomerization under the irradiation with UV–vis light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3342–3348, 2007     

Synthesis of block and graft copolymers of styrene by raft polymerization,using dodecyl‐based trithiocarbonates as initiators and chain transfer agents

A series of dodecyl‐based monofunctional trithiocarbonate chain transfer agents (CTAs) were successfully synthesized, toward the reversible addition‐fragmentations chain transfer (RAFT) polymerization of styrene. The CTAs were used as initiators for RAFT polymerization, in the absence of the conventional free radical initiator, at higher temperature. Polystyrene (PS) of narrow polydispersity index (PDI) is synthesized. Subsequently, poly(styrene‐b‐benzyl methacrylate) diblock and poly(styrene‐b‐benzyl methacrylate‐b‐2‐vinyl pyridine) triblock copolymers were synthesized from the PS macro‐RAFT agent by simply heating with the second and third monomer, respectively. These experiments suggest that it should be possible to control the RAFT polymerization initiated by a CTA through the adjustment of the temperature of polymerization in such manner that initiation is tailored to proceed at faster rate (at higher temperature) in comparison to propagation (lower temperature). For the specific CTAs studied in this work, the polymerization rate of styrene was high in the case of the reinitiating cyano (CN)‐substituted group (R group) compared to the other groups studied. The results further show that 4‐cyano pentanoic acid group is superior to the other R groups used for the RAFT polymerization of styrene, especially based on the polydispersity at a given conversion as well as the variation in the expected and experimental number‐average‐molecular weights. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Comparison Study on CO2-Promoted Crystallization and Melting Behavior of Polypropylene: Homopolymer and Copolymers

Three types of polypropylene, namely propylene homopolymer (HPP), block copolymer of propylene with ethylene (CPP-B) and random copolymer of propylene with ethylene (CPP-R), were melted and isothermally crystallized in a self-designed vessel under supercritical carbon dioxide (Sc-CO₂) atmosphere. The melting behavior and crystalline forms of crystallized samples were investigated using differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). The results showed that the presence of Sc-CO₂ could improve the crystallinity for all three polypropylenes, and the promoting effect was more obivious with increasing CO₂ pressure. In addition, it was observed that γ-crystals could be obtained in the CPP-B and CPP-R samples crystallized under Sc-CO_2, while no γ-crystals were formed in HPP under the given conditions. The relative content of γ-crystals obtained in CPP-R samples was much higher than that of CPP-B, and 100% γ-phase could be formed in the CPP-R sample when subjected to 14 MPa Sc-CO₂.     

Disorder-Order-Crystalline State Transitions of PEO-b-PPO-b-PEO Copolymers and their Blends: SAXS/WAXS/DSC Study

The structure in the symmetrical triblock copolymers PEO-b-PPO-b-PEO and their blend with PEO, studied by small angle x-ray scattering (SAXS), wide angle x-ray scattering (WAXS), and differential scanning calorimetry (DSC), pass from melt to the solid state on cooling. On subsequent heating back to the melt, they pass through disordered and ordered molten states, crystalline structure, and finally back to a disordered melt state. At high temperatures these systems are in the melt in the disordered state approximately described by the mean-field theory. The characteristic lengths of these systems, obtained from SAXS, are proportional to R _g . At lower temperatures, their structure changes to a disordered state which can be described by the concentration fluctuation theory. During cooling, the disordered melt structure changes abruptly into the ordered melt structure. The crystallization destroys this melt structure, forming a new lamellar structure with different periodicity. During heating near the melting point, lamellar periodicity increases very steeply. After melting, the crystalline structure transforms directly to the disordered state.     

环氧氯丙烷橡胶的热可逆共价交联

以环戊二烯二羧酸钾 [DCPD(COOK) 2 ]为交联剂 ,采用溶液反应法使环氧氯丙烷橡胶 (环氧氯丙烷均聚物 ,CER)交联 ,制得了凝胶含量达 88 75 %的交联CER ,研究了溶剂种类、反应温度、催化剂及交联剂用量对凝胶形成量的影响 .IR谱证明 ,DCPD(COOK) 2 与CER发生双端酯化而交联 ;反应溶解性试验表明 ,该共价交联聚合物具有热可逆转化特性 ,热可逆转化百分率随反应温度的提高、交联剂用量的增多而下降