A density functional study on a biomimetic non-heme iron catalyst: insights into alkane hydroxylation by a formally HO-FeV=O oxidant

The reactivity of [HO-(tpa)Fe(V)=O] (TPA=tris(2-pyridylmethyl)amine), derived from O-O bond heterolysis of its [H(2)O-(tpa)Fe(III)-OOH] precursor, was explored by means of hybrid density functional theory. The mechanism for alkane hydroxylation by the high-valent iron-oxo species invoked as an intermediate in Fe(tpa)/H(2)O(2) catalysis was investigated. Hydroxylation of methane and propane by HO-Fe(V)=O was studied by following the rebound mechanism associated with the heme center of cytochrome P450, and it is demonstrated that this species is capable of stereospecific alkane hydroxylation. The mechanism proposed for alkane hydroxylation by HO-Fe(V)=O accounts for the experimentally observed incorporation of solvent water into the products. An investigation of the possible hydroxylation of acetonitrile (i.e., the solvent used in the experiments) shows that the activation energy for hydrogen-atom abstraction by HO-Fe(V)=O is rather high and, in fact, rather similar to that of methane, despite the similarity of the H-CH(2)CN bond strength to that of the secondary C-H bond in propane. This result indicates that the kinetics of hydrogen-atom abstraction are strongly affected by the cyano group and rationalizes the lack of experimental evidence for solvent hydroxylation in competition with that of substrates such as cyclohexane.     

A Novel Environmentally Benign Method for the Selective Oxidation of Alcohols to Aldehydes and Ketones

In the presence of [Ru(terpyridine)(2,6‐pyridinedicarboxylate)], aliphatic and benzylic alcohols are oxidized to the corresponding aldehydes or ketones with high selectivity by using hydrogen peroxide as the oxidant. There is no need for the addition of co‐catalysts or organic solvents. By applying an optimized reaction protocol, high catalyst productivity (turnover number>10 000) and activity (turnover frequency up to 14 800 h^?1) has been achieved.     

A simple direct enzyme immunoassay of antibodies based on the differences in diffusion rates in a gel of a synthetic antigen and of its complex with antibodies

A simple direct enzyme immunoassay for semiquantitative detec tion of antibodies is suggested. It is based on the difference in diffusion rates in a gel for a synthetic low-mol-wt antigen and of its complexes with antibodies to be detected. Sensitivity and specificity of the devel oped assay are equal to an ELISA method. The assay has been tested with antibodies against HIV protein gp41 in rabbit serum. Possible applications and limitations of the method are discussed.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

淫羊藿根与叶活性成分的分析和比较

采用细胞膜色谱法（ＣＭＣ）筛选，并结合离体药理实验确定主要活性成分，利用高效液相色谱法分析比较了淫羊藿根与叶中的活性成分及其差异性．色谱条件为Ｋｒｏｍａｓｉｌ ＯＤＳ 柱（１５０ ｍｍ× ４．６ ｍｍ．Ｉ．Ｄ ）流动相甲醇－水（７０：３０，Ｖ：Ｖ）；检测波长２７０ｎｍ。筛选发现淫羊藿根中的两个有效成分ＹＹＨ－２１４和ＹＹＨ－２１６对血管有较强的舒张作用，表明活性成分在ＣＭＣ模型体系中的保留特性与药理作用之间存在良好的相关性。在此色谱条件下淫羊藿叶未检测到这两种活性成分．     

Oxidations by a H2O2-VO3 −-pyrazine-2-carboxylic acid reagent

Alkanes (cyclohexane, hexane, heptane isomers) are effectively oxidized in CH₃CN at 20–70°C by hydrogen peroxide when catalyzed by a Bu₄NVO₃-pyrazine-2-carboxylic acid system. Alkyl hydroperoxide is the main product; an alcohol and a ketone or an aldehyde are also formed. Under these conditions benzene is oxidized to give phenol, while alkyl benzenes yield oxygenation products both of the ring and the side chain. It has been assumed that the interaction of H₂O₂ with VO₃ ^– gives rise to generation of HO radicals and other radical-like vanadium containing species that abstract a hydrogen atom from an alkane, RH. The radical R^. formed reacts with O₂ to produce ROO^. which is then transformed to alkyl hydroperoxide.Presented at the VIII International Symposium on Homogeneous Catalysis (Amsterdam, 1992).Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 64–68, January, 1993.     

Influence of two grinding methods on the uncertainty of determinations of heavy metals in atomic absorption spectrometry/electrothermal atomisation of plant samples

 Chemical analyses of trace elements are affected by relatively high analytical errors due to the different steps of the laboratory procedures: samples grinding, mineralisation and instrumental measurements. In the present communication, the influence of the grinding phase on the global uncertainty of Pb, Cd, Ni and Cr determinations in plant samples by the classical method of atomic absorption spectrometry/electrothermal atomisation (AAS-ETA) after dry ashing is quantified. Two grinding machines, a planetary mill with balls and jars of agate versus a stainless steel grinder were compared by analysing leaf samples of cucumber, strawberry, kiwivines, apple trees and grapevines from agricultural experimental plots under controlled conditions. Variance components due to the difference between grinding methods and experimental plots were estimated. Further, the simultaneous effects of the grinding methods on all considered metals have been evaluated by analysis of variance. With the stainless steel grinder, on average, higher levels of the considered heavy metals were obtained (up to 67% of the mean values). On average, the increments were similar for metals contained in steel (Ni and Cr) and those not contained (Pb and Cd). The true causes of these differences need further investigation to determine whether the higher metal detection is due to possible contamination, to a different grinding quality or to other reasons. Finally, the grinding methods did not seem to affect the combined uncertainty of the analyses. Received: 3 November 1997 · Accepted: 29 November 1997     

Advances in two-dimensional GC with glass capillary columns

A versatile two-dimensional gas chromatograph is described, consisting of 2 separate ovens, one intermediate trap, an auxiliary inlet, and the necessary hardware to effect off-line switching according to the principle of Deans. The unit has been designed for use with high resolution glass capillary columns. The performance of individual instrumental components was critically evaluated. Results showed that low dead volume glass to metal connections were required in the manifold and detector lines to minimize extra-column effects. The mass of the intermediate trap must be low to allow rapid heating. Operational parameters are discussed and examples of some applications are shown.     

羧酸铜催化反应的研究——Ⅰ.羧酸铜催化醛肟转变为睛

本文报道了在多种羧酸铜催化下,醛肟在含有氰基的溶剂中(如CH_3CN、CH_3OCH_2CH_2CN等),均可脱水转变成相应的腈。反应条件温和,产率较高。具有不同空间和电性效应取代基的羧酸铜对反应的产率影响不大。实验中还发现溶剂乙腈参与了上述反应。