基于EKF的水下LD通信精对准控制算法

高速激光通信中接收机与光斑中心很难处于精对准状态,导致水下光通信链路难以稳定建立.首先采用蒙特卡洛仿真统计法分析激光光子在海水中传输的接收光强分布规律,再通过实验对接收端的光斑图像进行采样分析,利用曲线拟合得到接收器位置与接收光强的关系.仿真与实验结果表明:光束经过25 m的水下传输,接收光强分布仍近似为高斯分布.采用非线性估计算法(扩展卡尔曼滤波)与基本状态控制反馈理论,根据接收光强度估计接收器当前位置与最大光强处的距离,通过反馈算法实现接收端与光斑中心的主动跟踪对准.算法仿真结果显示,接收端对准误差在2 mm以下,稳定后接收效率超过98%.     

Fabrication of Pre-tilted Vertical Alignment Layers for High-Speed Liquid Crystal Display Using Bi-functional Photoreactive Monomers

Abstract

To enable recent 3D and moving picture applications, liquid crystal displays (LCD) must exhibit fast response and wide viewing angle characteristics. Pre-tilted vertical alignment layers for high-speed LCD were fabricated using bi-functional photoreactive monomers. The monomers can be confined to the polyimide layer and photo-polymerized by UV exposure under voltage. Response characteristics of photo-controlled alignment films according to the structure were investigated. Vertical alignment properties were evaluated using a polarizing optical microscope, and electro-optical characteristics were compared through the voltage-transmittance curve and response time measurement. Faster response speed could be obtained by using photoreactive monomers having a long alkyl chain.     

自抗扰控制技术在捷联惯导动基座初始对准中的应用研究

提出并设计了应用自抗扰控制技术(ADRC)的捷联惯性系统动基座初始对准方案。通过数字仿真，将卡尔曼滤波与自抗扰控制的性能进行了详细的比较，证明该方法具有对准时间快，精度高，抗干扰能力强等特点。     

Synthesis and Characterization of an α-Fe2O3-Decorated g-C3N4 Heterostructure for the Photocatalytic Removal of MO

This study describes the preparation of graphitic carbon nitride (g-C₃N₄), hematite (α-Fe₂O₃), and their g-C₃N₄/α-Fe₂O₃ heterostructure for the photocatalytic removal of methyl orange (MO) under visible light illumination. The facile hydrothermal approach was utilized for the preparation of the nanomaterials. Powder X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), and Brunauer–Emmett–Teller (BET) were carried out to study the physiochemical and optoelectronic properties of all the synthesized photocatalysts. Based on the X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance (DRS) results, an energy level diagram vs. SHE was established. The acquired results indicated that the nanocomposite exhibited a type-II heterojunction and degraded the MO dye by 97%. The degradation ability of the nanocomposite was higher than that of pristine g-C₃N₄ (41%) and α-Fe₂O₃ (30%) photocatalysts under 300 min of light irradiation. The formation of a type-II heterostructure with desirable band alignment and band edge positions for efficient interfacial charge carrier separation along with a larger specific surface area was collectively responsible for the higher photocatalytic efficiency of the g-C₃N₄/α-Fe₂O₃ nanocomposite. The mechanism of the nanocomposite was also studied through results obtained from UV-vis and XPS analyses. A reactive species trapping experiment confirmed the involvement of the superoxide radical anion (O₂^•−) as the key reactive oxygen species for MO removal. The degradation kinetics were also monitored, and the reaction was observed to be pseudo-first order. Moreover, the sustainability of the photocatalyst was also investigated.     

激光点火系统用高功率光纤光开关

仿真和实验研究了一种控制Nd:YAG脉冲激光能量通断的光纤直接连接型光开关。建立光纤耦合模型,分析了光纤对准误差中对耦合效率的影响,其中横向偏移的影响最显著。采用微机电系统V型槽固定光纤,微小型凸轮作为制动器,步进电机驱动凸轮旋转,微小型凸轮与移动光纤相切,带动光纤移动,实现两光纤的错开和对准。制造了这种高功率直接连接型光纤光开关原理样机,并进行了主要性能测试。测试结果表明,这种光开关能够满足激光点火系统的大容量、高隔离度的要求。     

大型Schmidt望远镜光学系统调整方法

安装于紫金山天文台盱眙观测站用以观测近地天体的大型Schmidt望远镜,采用了平场Schmidt光学系统,改正镜通光口径为1m,球面反射镜口径为1.2m,焦距为1.8m,接收器用了4K×4K的高灵敏度CCD。本文叙述了该仪器光轴调整的方法及调整后观测获得的初步结果。叙述了望远镜光轴校正方法、校正结果、CCD靶面的调整及望远镜极轴高度、方位的调整及相应的照片。经实际观测的结果是:露光1s可拍到18等星;露光4s可拍到19.3等星;露光20s可拍摄到21.2等星。     

Accurate Measurement of Small Spin–Spin Couplings in Partially Aligned Molecules Using a Novel J-Mismatch Compensated Spin-State-Selection Filter

The accurate measurement of small spin–spin coupling constants in macromolecules dissolved in a liquid crystalline phase is important in the context of molecular structure investigation by modern liquid state NMR. A new spin-state-selection filter, DIPSAP, is presented with significantly reduced sensitivity to J-mismatch of the filter delays compared to previously proposed pulse sequences. DIPSAP presents an attractive new approach for the accurate measurement of small spin–spin coupling constants in molecules dissolved in anisotropic solution. Application to the measurement of ¹⁵N–¹³C′ and ¹H^N–¹³C′ coupling constants in the peptide planes of ¹³C, ¹⁵N labeled proteins demonstrates the high accuracy obtained by a DIPSAP-based experiment.     

液晶显示用取向材料聚甲基丙烯酸肉桂酰氧基乙酯的光控取向研究

通过实验研究了光聚合物材料聚甲基丙烯酸肉桂酰氧基乙酯（ＣＥＭＣ）的光化学反应过程, 以及对液晶材料ＬＣ－６７１０Ａ 的取向能力． 通过原子力显微镜（ＡＦＭ）观察了取向层表面在光化学反应前后的变化, 测量了光控取向膜液晶盒中液晶分子的预倾角及单面光控取向扭曲向列液晶显示器（ＴＮＬＣＤ）的电光特性和时间响应特性曲线, 研究了液晶分子排列取向的机理．     

超形变原子核全同带的判断与角动量增量顺排量子化

给出了一个新的从能量角度判断超形变带全同带的方法,并运用这种方法分析了100多条超形变带.给出了全同带数目随判断参数的变化关系.还引进了量子化区间的概念,从统计角度分析角动量增量顺排的量子化问题,得出了全同带增量顺排随判据加严而趋向于量子化的性质,而正常形变全同带则不具有这一性质.讨论了新方法与粒子转子模型之间的关系.     

A=190区奇奇核超形变带顺排涌动量的相加性

利用推转玻尔-莫特森模型指定的能级自旋,研究了A＝190区奇奇核194Tl和196Bi超形变带的顺排角动量的相加性．194Tl的6条超形变带中,有4条满足顺排角动量的相加性规则,而196Bi的超形变带不满足这个规则．