中空纤维催化膜反应器中环戊二烯的选择加氢反应

将聚乙烯吡咯烷酮（ＰＶＰ）负载钯催化剂（ＰＶＰ－Ｐｄ）镶嵌到三种醋酸纤维（ＣＡ）中空膜（ＣＡ－Ｉ，ＣＡ－Ⅱ，ＣＡ－Ⅲ）内制各中空纤维催化膜，并进一步制成催化膜反应器，在４０℃和０．１ＭＰａ的反应条件下，在催化膜反应器中进行了环戊二烯的选择加氢反应，考察了具有不同氢气渗透率的醋酸纤维丝组成的三种膜反应器对反应的转化率及选择性的影响，并在此基础上考察了各种反应参数对反应的影响，ＣＡ中空纤维催化膜对环戊     

5-羟色胺在碳纤维微电极上的电化学测定及伏安行为研究

本文研究了5 羟色胺在Na2HPO4 KH2PO4(pH6.0)缓冲溶液中,于自制的碳纤维微电极上的伏安行为。在此缓冲溶液中5 羟色胺有一对氧化还原峰,峰电位分别为0.2V和0.4V。峰电流与5 羟色胺的浓度分别在4.0×10-6～4.0×10-5mol/L和5.0×10-6～5.0×10-5mol/L范围内呈良好的线性关系,检出限分别为4.70×10-6mol/L和1.76×10-6mol/L。同时利用多种电化学方法求出了动力学参数。     

Formation of Negative Hydrogen Ions in a Ne–H2 Hollow Cathode Discharge

The formation of negative hydrogen ions in a conventional hollow cathode discharge has been investigated. A mixture of Ne and H₂ proved to be more advantageous compared to pure hydrogen. The study has been performed by solving the electron Boltzmann equation, coupled with a system of balance equations for neon and hydrogen neutral and charged particles. The vibrational distribution function of hydrogen has been calculated. Our calculations show unusually high population of vibrationally excited hydrogen molecules in a Ne–H₂ mixture, which explains the high density of negative hydrogen ions under optimal conditions (total gas pressure of few Torr, hydrogen number mole fraction of 1–10% and discharge current of 10–100 mA). Line intensities originating from highly excited neon states vs. hydrogen pressure have been calculated and a comparison with existing experimental results has been made.     

Some microrheological aspects of wood-pulp fibres subjected to fatigue loading

Wood-pulp fibres are recognized as concentrically-layered, laminated composite tubes of structural reinforcing material, the cellulose microfibrils, embedded in a cementing matrix of hemicellulose and lignin. When the single fibres are subjected to cyclic mechanical action, their morphological behaviour is characterized by the fatigue growth of micro-voids and surface damage which individually and collectively give rise to stress concentrations, and eventually crack development. The progressive damage phenomena, evinced by the surface imaging and optical sectioning techniques through utilizing confocal laser scanning microscopy, are understood to be consequences of the cumulative material micromechanical degradation and subsequent microstructural breakdown of the cellulose microfibrillar framework. This structural breakdown is believed to effect the fibrillation and flexibilization of the fibres This revised version was published online in August 2006 with corrections to the Cover Date.     

Micellar electrokinetic capillary chromatography using polymeric hollow fibers

Summary In this paper, polymeric hollow fibers prepared from pH-stable polypropylene were used as columns for micellar electrokinetic capillary chromatography (MECC). The electroosmotic flow (EOF) for polypropylene hollow fibers was evaluated in the pH range of 5.0–12.0. With untreated polypropylene hollow fibers a stabilized but enhanced EOF was achieved when SDS was used in the buffer, decreasing the separation window for uncharged substances in MECC to impractical levels. Uncharged acrylamide and charged 2-acryloylamido-2-methylpropane sulfonic acid surface modifications were used to lower the strength of the EOF, increase the separation window and prevent local overheating that could melt the column wall.     

Generalization of in-situ polymerization method for preparing core-shell polymeric nanospheres and hollow spheres

According to the new method of preparing core-shell nanospheres developed by our group, by using two monomers, 2-hydroxypropyl methacrylate(HPMA) and vinyl acetate(VAc), two kinds of core-shell nanospheres with poly(ɛ-caprolactone) (PCL) as the core and crosslinked poly(2-hydroxypropyl methacrylate) (PHPMA) or poly(vinyl acetate) (PVAc) as the shell were successfully prepared under similar conditions. After degrading the PCL cores of the two kinds of nanospheres by lipase, the corresponding crosslinked poly(methyl acrylic acid) hollow spheres and crosslinked poly(vinyl alcohol) hollow spheres were obtained. Results indicate that the new method we proposed for preparing core-shell polymeric nanospheres via in-situ polymerization can be generalized to a certain extent, and it is suitable for many systems provided the monomer used is soluble in water, while its corresponding polymer is insoluble in water. Translated from Chemical Journal of Chinese University, 2006, 27(9): 1762–1766 [译自: 高等学校化学学报]     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).