Electron mobility in poly(3-hexylthiophene) enhanced by gamma-ray irradiation

Gamma-ray irradiation effects on the photoresponsive thin-film devices based on the regioregular poly(3-hexylthiophene) (RR-P3HT) conjugated polymer have been studied by means of atomic force microscopy, UV–vis absorption, photoluminescence (PL), and time-of-flight measurements. As a result, increased light absorption in the red region and PL quenching induced by the irradiation were observed. Besides, enhancement of the electron/hole mobilities, attributable to improved ordering or increased nanodomain size of the P3HT thin films, was revealed.     

Meta Junction Promoting Efficient Thermally Activated Delayed Fluorescence in Donor-Acceptor Conjugated Polymers

The meta junction is proposed to realize efficient thermally activated delayed fluorescence (TADF) in donor–acceptor (D-A) conjugated polymers. Based on triphenylamine as D and dicyanobenzene as A, as a proof of concept, a series of D-A conjugated polymers has been developed by changing their connection sites. When the junction between D and A is tuned from para to meta, the singlet–triplet energy splitting (ΔE_ST) is found to be significantly decreased from 0.44 to 0.10 eV because of the increasing hole–electron separation. Unlike the para-linked analogue with no TADF, consequently, the meta-linked polymer shows a strong delayed fluorescence. Its corresponding solution-processed organic light-emitting diodes (OLEDs) achieve a promising external quantum efficiency (EQE) of 15.4 % (51.9 cd A⁻¹, 50.9 lm W⁻¹) and CIE coordinates of (0.34, 0.57). The results highlight the bright future of D-A conjugated polymers used for TADF OLEDs.     

Ag3PO4量子点/石墨相氮化碳纳米片复合光催化剂的制备及其对苯甲醇选择性氧化活性

以热氧化剥离法得到的超薄石墨相氮化碳(g-C₃N₄)纳米片为载体,首次在室温条件下,制备了系列Ag₃PO₄量子点/g-C₃N₄纳米片复合光催化剂;通过透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见漫反射光谱(UV-Vis DRS)、荧光光谱(PL),对复合光催化剂的形貌、结构和光学性质进行了表征,考察了系列光催化剂对苯甲醇的光催化选择性氧化性能。 结果表明,粒径为3~5 nm Ag₃PO₄颗粒均匀分散g-C₃N₄纳米片上,结晶度良好。 以乙腈为溶剂时,当m(Ag₃PO₄)/m(g-C₃N₄)=0.6时,苯甲醇具有32.1%的最大转化率,对产物苯甲醛具有90%的最高选择性;活性物种捕捉实验结果表明,该催化氧化反应的主要活性物是光生空穴的氧化作用,能带计算结果表明,该复合催化剂结构具有合适的苯甲醇的氧化电位而选择性生成苯甲醛。     

Designing Hole Transport Materials with High Hole Mobility and Outstanding Interface Properties for Perovskite Solar Cells

Organic–inorganic halide perovskite solar cells (PSCs) have attracted much attention due to their rapid increase in power conversion efficiencies (PCEs), and many efforts are devoted to further improving the PCEs. Designing highly efficient hole transport materials (HTMs) for PSCs may be one of the effective ways. Herein we theoretically designed three new HTMs (FDT−N, FDT−O, and FDT−S) by introducing a nitrogen-phenyl group, an oxygen atom, and a sulfur atom into the spiro core of an experimentally synthesized HTM (FDT), respectively. And then we performed quantum chemical calculation to study their application potential. The results show that the devices with FDT−O and FDT−S instead of FDT may have higher open circuit voltages owing to their lower highest occupied molecular orbital (HOMO) energy levels. Moreover, FDT−S exhibits the best hole transport performance among the studied HTMs, which may be due to the significant HOMO-HOMO overlap in the hole hopping path with the largest transfer integral. Furthermore, the results on interface properties indicate that introducing oxygen and sulfur atoms can enhance the MAPbI₃/HTM interface interaction. The present work not only offers two promising HTMs (FDT−O and FDT−S) for PSCs but also provides theoretical help for subsequent research on HTMs.     

带裂纹的椭圆孔口问题的应力分析

断裂现象与材料和结构中的孔洞、缺口或裂纹等缺陷密切相关,这是因为缺陷附近的应力集中明显.该文利用复变方法,通过保角映射研究了带裂纹的椭圆孔洞的平面弹性问题,给出了应力强度因子的解析解.并由此计算了两互相垂直的裂纹问题.     

气膜孔角度对动叶前缘冲击/气膜复合冷却的影响

本文针对GE-E3第一级动叶前缘的冲击/气膜复合冷却结构进行了热流耦合数值研究.采用标准k-ω湍流模型,分析了前缘气膜孔对称布置时,其角度对透平动叶前缘冲击/气膜复合冷却特性的影响;在五种冷气质量流量比(MFR=0005,0.010, 0.016, 0.020, 0.025)下,研究了气膜孔在不同角度(β=20°,25...     

理论研究电流注入对垂直腔面发射激光器多横模行为的影响

从包含时空变量的速率方程出发,针对弱折射率导引垂直腔面发射激光器(VCSELs),利用空间积分法分析了典型电注入参数对VCSELs多横模行为的影响,在不降低模型准确性的前提下提高了仿真效率。仿真结果表明,注入盘孔径和注入环越小、注入强度越低以及电流扩散越弱时,VCSELs更易实现单横模工作;反之,VCSELs高阶横模开始出现并呈现较强的模式竞争,引发了载流子空间烧孔效应,并导致基模强度降低。进一步得出,在环形注入方式下,高阶模式更容易出现且彼此间的竞争较盘形注入时强。     

Unitarity and Page Curve for Evaporation of 2D AdS Black Holes

We explore the Hawking evaporation of two-dimensional anti-de Sitter (AdS2), dilatonic black hole coupled with conformal matter, and derive the Page curve for the entanglement entropy of radiation. We first work in a semiclassical approximation with backreaction. We show that the end-point of the evaporation process is AdS2 with a vanishing dilaton, i.e., a regular, singularity-free, zero-entropy state. We explicitly compute the entanglement entropies of the black hole and the radiation as functions of the horizon radius, using the conformal field theory (CFT) dual to AdS2 gravity. We use a simplified toy model, in which evaporation is described by the forming and growing of a negative mass configuration in the positive-mass black hole interior. This is similar to the “islands” proposal, recently put forward to explain the Page curve for evaporating black holes. The resulting Page curve for AdS2 black holes is in agreement with unitary evolution. The entanglement entropy of the radiation initially grows, closely following a thermal behavior, reaches a maximum at half-way of the evaporation process, and then goes down to zero, following the Bekenstein–Hawking entropy of the black hole. Consistency of our simplified model requires a non-trivial identification of the central charge of the CFT describing AdS2 gravity with the number of species of fields describing Hawking radiation.     

Organic electroluminescent device with aromatic amine-containing polymer as a hole transport layer (II): Poly(arylene ether sulfone)-containing tetraphenylbenzidine

Organic electroluminescent devices were fabricated using a poly(arylene ether sulfone)-containing tetraphenylbenzidine (PTPDES) and tris(8-quinolinolato)-aluminum(III) complex, Alq, as the hole transport layer and the electron-transporting emitter layer, respectively. A device structure of glass substrate/indium—tin oxide (ITO)/PTPDES/Alq/Mg : Ag was employed. Hole injection from ITO through the PTPDES layer to the Alq layer and concomitant electroluminescence from the Alq layer were observed. Bright green light with a luminance of 14,000 cd/m² was observed at a drive voltage of 14 V, indicating that the polymer possesses a high hole mobility and a high electron-blocking capability.