核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

Ion-exchange selectivity and chromatographic separation of trivalent metals on titanium antimonate

Summary The ion exchange selectivity of trivalent metal ions has been determined on titanium antimonate cation exchanger prepared by coprecipitation of antimony to titanium at different mole ratios. The selectivity sequence Al³⁺<Cr³⁺<Ga³⁺<In³⁺<Fe³⁺ was found for trivalent metal ions at an initial concentration of 10^–4 mol dm^–3 in nitric acid media. A high separation factor ^Ga/Al = Kd^Ga/Kd^Al, 4.8×10³, was observed for the Ga³⁺–Al³⁺ pair on titanium antimonate with an antimony to titanium ratio of 0.34. The effective separation of Ga³⁺ and In³⁺ from Al³⁺ was achieved using a 3 cm×0.5 cm i.d. column containing titanium antimonate with an antimony to titanium ratio of 0.34.     

硫氰酸铵-罗丹明 B-H2O的液-固体系浮选分离铜(Ⅱ)的研究

研究了硫酸铵存在下硫氰酸铵-罗丹明B-H2O的液-固体系浮选分离铜(Ⅱ)的行为及其与常见离子分离的条件.结果表明,当(NH4)2SO4用量为1.0 g,0.1 mol·L-1硫氰酸铵溶液1.5 mL和0.001 mol·L-1罗丹明B溶液2.0 mL时,铜(Ⅱ)以不溶于水的三元离子缔合物(RhB)2[Cu(SCN)4]形式在液-固两相界面定量浮选析出,而Cdd2、Mn2+、Co2+、Ni2+、Al3+等离子在此条件下不被浮选,实现了铜(Ⅱ)与这些离子的定量分离,对合成水样中微量铜(Ⅱ)进行的定量浮选分离测定,浮选富集的平均回收率达101.4%.     

Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Phase separation behavior of epoxy resin modified with crosslinked rubber

Low molecular weight liquid rubber (ATBN = amine terminated butadiene acrylonitrile copolymer or CTBN = carboxyl terminated butadiene acrylonitrile copolymer)–DGEBA (diglycidyl ether of bisphenol A) blends indicated upper critical solution temperature (UCST) behavior. The phase separation behavior of the neat and crosslinked rubber (ATBN, CTBN)–epoxy blends was analyzed by a laser light scattering experiment. Lauryl peroxide (LPO) was employed to crosslink the rubber during the initial annealing stage. The onset point of the phase separation in the crosslinked ATBN–epoxy system occurred later than in the case of the neat ATBN–epoxy system. However, the onset point of the phase separation process started earlier in the case of the crosslinked CTBN–epoxy system. The domain correlation length of the crosslinked rubber-added system was smaller than that of the neat rubber-added system.     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

A Validated LC Method for Separation and Quantification of Voriconazole and Its Enantiomer

A simple liquid chromatographic method was developed for the separation and quantification of voriconazole and its enantiomer in drug substance. The separation was achieved on Chiral cel-OD (250 mm × 4.6 mm × 10 μm) using mobile phase consisting of n-hexane and ethanol in the ratio 9:1 (v/v) with a flow rate of 1.0 mL min⁻¹, at 27 °C column temperature and detection at 254 nm with an injection volume of 20 μL. Ethanol was used as diluent. The method is capable of detecting the (2S, 3R) enantiomer down to 0.0075% and can quantify down to 0.021% with respect to sample concentration. The method is rapid and the resolution achieved was about 3.0. This method can be employed for the quantification of (2S, 3R) enantiomer in voriconazole drug substance.     

Modulating charge-transfer interactions in topologically different porphyrin-C60 dyads

Control over the interchromophore separation, their angular relationship, and the spatial overlap of their electronic clouds in several ZnP-C(60) dyads (ZnP=zinc porphyrin) is used to modulate the rates of intramolecular electron transfer. For the first time, a detailed analysis of the charge transfer absorption and emission spectra, time-dependent spectroscopic measurements, and molecular dynamics simulations prove quantitatively that the same two moieties can produce widely different electron-transfer regimes. This investigation also shows that the combination of ZnP and C(60) consistently produces charge recombination in the inverted Marcus region, with reorganization energies that are remarkably low, regardless of the solvent polarity. The time constants of electron transfer range from the mus to the ps regime, the electronic couplings from a few tens to several hundreds of cm(-1), and the reorganization energies remain below 0.54 eV and can be as low as 0.16 eV.