Determination of trace elements in human serum by inductively coupled plasma atomic emission spectrometry with flow injection

An analytical method for the simultaneous determination of some trace elements (Au, Fe, Mg, Li, Sr, Zn) in human serum by inductively coupled plasma atomic emission spectrometry (ICP-AES) with flow injection is described. Physical interference caused by the change of sample viscosity is discussed. When 100 μl of serum was injected, the relevant recoveries of > 99% for Li, > 98% for Cu and Mg, > 95% for Fe were obtained for an NIST SRM with R.S.D. > 1.3% using optimized flow injection parameters. The prepared lyophilized control serum for routine analysis in clinical laboratories was analyzed and verified for the validity of the technique employed in this experiment using NIST SRM 909 as a primary reference material.     

Flow injection analysis methods for determination of diffusion coefficients

Two flow injection analyses (FIA) methods for the determination of diffusion coefficients in a straight single tube FIA system were developed. Based on the analytical solution of the convection-diffusion equation, linear relationships of the logarithmic values of the dispersion coefficient (D) and the half-peak width (W_1/2) with the diffusion coefficient (D_m) were obtained. Experiments were designed to verify these methods. For example, for potassium hexacyanoferrate (III) a D_m value of 0.72 × 10⁵ cm² s⁻¹ was found versus a literature value of 0.76 × 10⁵ cm² s⁻¹ (error, 5%). For potassium hexacyanoferrate (II) a D_m value of 0.67 × 10⁵ cm² s⁻¹ was obtained versus a literature value of 0.63 × 10⁵ cm² s⁻¹ (error, 6%). The diffusion coefficients of some important biomedical compounds, such as dopamine, epinephrine, norepinephrine and ascorbic acid, were then determined. The values of 10⁵ D_m/cm² s⁻¹ are 0.60 ± 0.03, 0.44 ± 0.02, 0.60 ± 0.01 and 0.68 ± 0.06, respectively.     

Isolation of essential oils from tobacco by gas co-distillation/solvent extraction

Summary The essential oils have been isolated from tobacco leaves using a simple gas co-distillation apparatus. The method involves co-distillation with water under the continuous stream of an inert gas with subsequent single solvent extraction of the distillate. The extract is analysed on GC and GC/MS in splitless injection mode without further concentration. The method was evaluated for reproducibility using n-octadecane as an internal standard. The distillation-extraction procedure was reporducible with an average deviation of ±3% for the major constituents. The present method was applied to the analyses of the essential oils of other agricultural products.Dedicated to Dr. L. S. Ettre on the occasion of his 60th birthday.     

Mercury species immobilized on sulphydryl cotton: A new candidate reference material for mercury speciation

A batch of sulphydryl cotton microcolumns was prepared and charged with a mixed Hg standard solution (methyl-, ethyl- and inorganic Hg, 10 g l^–1 as Hg, 3 ml) and stored at 4 °C in a light-tight box. At regular time intervals over a 4 month period microcolumns were removed and Hg species were quantified by gas chromatography microwave-induced plasma atomic emission spectrometry (after elution, extraction and derivatization steps). It was found that analyte recoveries for methyl- and inorganic Hg were quantitative over the 4 month period while ethyl-Hg species appeared to be stable for up to 2 months.     

Large volume sample application by a simplified “closed” on-column injector in capillary gas chromatography

Summary A new simplified version of a closed on-column injector is introduced. Because of its design isobaric injection conditions do not have to be followed and a wide range of injection temperatures above the boiling point of the sample solvent can be chosen for on-column injections in capillary gas chromatography. Also, when following certain basic injection rules, injections of large sample volumes (20 l or more) give accurate and reproducible results without further problems.Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.     

Flow-injection analysis with a small cylindrical wire type electrode

An amperometric detector with a small thin mercury film electrode is described. The device demonstrates advantageous operational characteristics such as small dispersion (D<2) and “memory effect” (me<0.6%), extensive maximum sample frequency (msf −200 samples/h), and high sensitivity. It has been proven useful in flow-injection analysis at a constant potential under hydrodynamic conditions.     

简易型离子选择电极-流动注射分析仪的研制及卤水中氯、溴和碘的连续测定

本文设计研制了简单实用的流通池,组装了简易型离子选择电极—流动注射分析仪,对体系的分析特点和影响因素进行了考察。此装置性能可靠,能满足简单流注分析的需要,并建立了卤水中Cl~-、Br~-和I~-的连续测定方法。     

Isolation of new quinidine metabolites and simultaneous determination of quinidine and its metabolites in blood and urine by direct injection HPLC analysis

Summary New quinidine metabolites, including 10,11-dihydrodiol quinidine N-oxide, 10,11-dihydrodiol quinidine and their glucuronides, were found in human urine. A quinidine monitoring HPLC method including these metabolites, is proposed by the direct injection of body fluid samples onto the precolumn for deproteinization followed by reverse phase separation in the analytical column with a column switching technique. The recovery of spiked quinidine and its metabolites in plasma was quantitative (98–102%) with good reproducibility (C.V.: 1.6–4.0%). Several clinical samples such as whole blood and urine were analyzed by the present method.     

动力学体系中双组份的协同效应研究及其分析应用

用停流ＦＩＡ－分光光度法研究了铬（Ⅵ）－碘化钾动力学反应体系中铁(Ⅱ)和钒(Ⅳ)的协同诱导效应，以协同系数（Ｄ）表示二者相互作用程度的大小，在此基础上提出了一种新的动力学双组份同时测定的方法，本法可扩大前述方法的线性范围，并降低检测限，测定了模拟水样品中铁和钒的含量，结果满意。     

流动注射分光光度法测定微量硫氰酸根

基于３，５－Ｂｒ２－ＰＡＤＡＰ硫氰酸根分别与重铬酸根，铈（ＩＶ）在硫酸介质中反应成不稳定的蓝色产物，建立了两种测定微量硫氰酸根的流动注射分光光度新方法，在前一方法中，硫氰酸根含量在０．８０～７．２０ｍｇ／Ｌ范围内可定量测定，检出限为０．２７ｍｇ／Ｌ在后一方法中，硫氰酸根含量在０．８０～６．４０ｍｇ／Ｌ范围内呈线性，检出限为０．３０ｍｇ／Ｌ。当进样体积为１００μＬ时，进样频率为６０次／ｈ，所建立的两