Strategy for enantio- and diastereoselective syntheses of all possible stereoisomers of 1,3-polyol arrays based on a highly catalyst-controlled epoxidation of alpha,beta-unsaturated morpholinyl amides: application to natural product synthesis

We describe a new strategy for enantio- and diastereoselective syntheses of all possible stereoisomers of 1,3-polyol arrays. This strategy relies on a highly catalyst-controlled epoxidation of alpha,beta-unsaturated morpholinyl amides promoted by the Sm-BINOL-Ph(3)As[double bond]O (1:1:1) complex, followed by a conversion of morpholinyl amides into ketones and diastereoselective ketone reduction. Highly enantio- (up to >99 % ee) or diastereoselective (up to >99.5:0.5) epoxidation was achieved using 5-10 mol % of the Sm complex to afford synthetically very useful, nearly optically pure alpha,beta-epoxy morpholinyl amides. Stereoselectivity of the epoxidation was controlled by the chirality of BINOL with overwhelming inherent diastereofacial preference for the substrate. Combination with the syn- and anti-selective ketone reduction with the highly catalyst-controlled epoxidation allowed for an iterative strategy for the syntheses of all possible stereoisomers of 1,3-polyol arrays. Eight possible stereoisomers of 1,3,5,7-tetraol arrays were synthesized with high to excellent stereoselectivity. Moreover, the efficiency of the present strategy was successfully demonstrated by enantioselective syntheses of several 1,3-polyol/alpha-pyrone natural products, for example, cryptocaryolone diacetate.     

Waste-free and facile solid-state protection of diamines,anthranilic acid,diols, and polyols with phenylboronic acid

Phenylboronic acid (2) reacts quantitatively by ball-milling in the solid state with o-phenylendiamine, 1,8-diaminonaphthalene, anthranilic acid, pyrocatechol, pyrogallol, pinacol, bicyclic cis-diols, mannitol, and inositol to form the five- or six-membered cyclic phenylboronic amides or esters. Catalysts or other auxiliaries are strictly excluded as they are not required and would have to be removed after the reactions. These varied model reactions provide pure protected products without the necessity of further purifying workup and the potential for protection chemistry is demonstrated. Some of the reactions can also be quantitatively performed if stoichiometric mixtures of the reactants are co-ground or co-milled and heated to appropriate temperatures either below the eutectics or above the melting points. The temperatures are much higher in the latter case. Similar reactions in solution suffer from less than 100 % yield of the mostly sensitive compounds that are difficult to purify and thus create much waste. The hydrolysis (deprotection) conditions of the products are rather mild in most cases. Therefore, this particularly easy access to heteroboroles, heteroborolanes, heteroborinones, heteroborines, and heteroborinines is highly valuable for their more frequent use in protective syntheses.     

Synthesis and characterization of hyperbranched polyurethane-urea coatings

A series of hyperbranched polyurethane (HBPU)-urea coatings were synthesized by a systematic two-step reaction process. Initially, isocyanate terminated PU prepolymers were prepared from a hyperbranched polyester polyols with isophorone diisocyanate at NCO/OH ratio of 1.6:1 for 5 h at 70-80 °C. The excess NCO content after the synthesis of NCO terminated HBPU prepolymer was completely reacted with atmospheric moisture. The obtained HBPU-urea networks were characterized with Fourier transform-infrared (FT-IR) spectroscopy for the quantitative evolution of the extent of urethane and urea bonds as well as to study the structure-property relationship. In order to find out the changes and types of intermolecular H-bonding interaction in the HBPU-urea films with the variation in polyester structure, the deconvolution of FT-IR spectra were carried out using Origin 6.0 software through Gaussian curve-fitting method. The viscoelastic properties and thermal stability of the synthesized coatings were determined by dynamic mechanical and thermal analyzer and thermogravimetric analyzer, respectively. For HBPU-urea samples glass transition temperature and thermal stability increased with the generation number from the first to the third. Polyester samples showed single step decomposition profile and HBPU-urea samples showed two-steps decomposition with good thermal stability.     

Structure and properties of polyurethanes based on halogenated and nonhalogenated soy–polyols

Four polyols were prepared by a ring opening of epoxidized soybean oil with HCl, HBr, methanol, and by hydrogenation. Two series of polyurethanes were prepared by reacting the polyols with two commercial isocyanates: PAPI and Isonate 2143L. Generally, the properties of the two series were similar. The crosslinking density of the polyurethane networks was analyzed by swelling in toluene. Brominated polyols and their corresponding polyurethanes had the highest densities, followed by the chlorinated, methoxylated, and hydrogenated samples. The polyurethanes with brominated and chlorinated polyols had comparable glass transition and strength, somewhat higher than the polyurethane from methoxy containing polyol, while the polyurethane from the hydrogenated polyol had lower glass‐transition and mechanical properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4062–4069, 2000     

Hydroxyfunctional oxetane‐inimers with varied polarity for the synthesis of hyperbranched polyether polyols via cationic ROP

Synthesis and characterization of novel hydroxyl‐functionalized oxetane‐inimers with varied alkyl chain length—3‐hydroxymethyl‐3‐methoxymethyloxetane, 3‐hydroxymethyl‐3‐propoxymethyloxetane, and 3‐hexoxymethyl‐3‐hydroxymethyloxetane—is reported. Cationic ring‐opening polymerization of these latent, cyclic AB₂‐monomers leads to hyperbranched (hb) polyether polyols with degrees of branching between 34 and 69%, confirmed by inverse‐gated (IG) ¹³C NMR spectroscopy. The hyperbranching polymerization yielded apparent molecular weights (M_n) ranging from 500 to 2500 g mol^?1 (size exclusion chromatography). Remarkably, by copolymerization of 1,1,1‐tris(4‐hydroxyphenyl)ethane as a “focal” unit, polymerization under slow monomer addition conditions lead to higher apparent molecular weights up to 11,220 g mol^?1. The end groups of the hb polymers were studied via matrix‐assisted laser desorption/ionization time of flight mass and NMR spectrometry. By varying the alkyl chain length, tailoring of the solubility and glass transition temperatures of the materials is possible. Potential applications range from macroinitiators with defined polarity to tailoring of surface properties of antifouling materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2850–2859     

制备方法对Cu-SiO_2催化剂结构及其生物基木糖醇选择氢解性能的影响

生物质基高碳多元糖醇选择氢解制备高附加值的C2、C3小分子多元醇具有重要的科学意义和应用前景.采用常规浸渍法(IM)、沉淀凝胶法(PG)、尿素水解沉积沉淀法(UHDP)、蒸氨沉积沉淀法(AEDP)和异相沉积沉淀法(HTDP)等5种不同方法制备了纳米Cu-Si O2催化剂,通过XRD、XPS、H2-TPR、BET和N2O化学吸附等不同方法对催化剂结构进行了表征,以Ca(OH)2为助剂考察了催化剂在生物基木糖醇选择氢解制备乙二醇和1,2-丙二醇反应中的催化性能.结果显示:制备方法不同Cu-Si O2催化剂的表面和体相组成不同,IM催化剂焙烧样品表面主要以Cu O存在,AEDP和HTDP焙烧样品的表面主要是页硅酸铜,而PG和UHDP焙烧样品的表面Cu O和页硅酸铜共存;IM和UHDP焙烧样品的体相以团聚的大颗粒Cu O为主,PG和HTDP样品以高分散Cu O为主,AEDP样品体相以高分散无定形页硅酸铜存在.受样品中物相组成的影响,不同方法所制备催化剂的分散度按AEDPPGHTDPUHDPIM顺序递减,经H2还原活化后,催化剂中Cu0颗粒尺寸按相反顺序递增.催化剂的木糖醇氢解反应活性和二元醇目标产物选择性受制备方法影响十分明显,均按AEDP、PG、HTDP、UHDP和IM的顺序先增高后降低,以UHDP法制备的Cu颗粒尺寸在12 nm左右的催化剂表现最佳,主要原因是该反应为结构敏感型反应,活性和选择性依赖于Cu颗粒尺寸.     

Towards carbohydrate derivatives of the ReI(CO)3 fragment

With the [Re(CO)(3)Br(3)](2-) ion as a precursor for the Re(I)(CO)(3) fragment, the diols (1R,2R)-cyclohexane-1,2-diol [(1R,2R)-Chxd], anhydroerythritol (AnEryt), and (1S,2S)-cyclopentane-1,2-diol [(1S,2S)-Cptd] form dinuclear monoanions in the salts (NBu(4))[(Re(2)(CO)(6){mu-(1R,2R)-ChxdH(-1)}(3)] (1), [K([18]crown-6)][Re(2)(CO)(6)(mu-OMe)(2)(mu-AnErytH(-1))] (2) and (NBu(4))[Re(2)(CO)(6){mu-(1S,2S)-CptdH(-1)}(3)] (3). The monoanionic diolato ligands in these triply bridged dirhenates(I) are monodentate. Bridging triolato ligation in the trirhenates(I) is supported by the anions of glycerol (Glyc) and methyl beta-D-ribopyranoside (Me-beta-D-Ribp), the latter binding in its (1)C(4) conformation, in (DBUH)(2)[Re(3)(CO)(9)(mu(3)-O)(mu(3)-GlycH(-3))]0.5 MeCN (4 a), (NEt(4))[Re(3)(CO)(9)(mu(3)-OMe)(mu(3)-GlycH(-3))] (4 b) and (DBUH)[Re(3)(CO)(9)(mu(3)-OMe)(mu(3)-(1)C(4)-Me-beta-D-Ribp2,3,4H(-3))] (5). The chiral sugar alcohols L-threitol (L-Thre) and D-arabitol (D-Arab) act as tetra- and pentadentate ligands, respectively, in (NEt(4))[Re(2)(CO)(6)(L-ThreH(-3))]MeCN (6) and (NEt(4))(2)(DBUH)(2)[Re(6)(CO)(18)(D-ArabH(-5))(2)] (7). Complexes 6 and 7 are free of supporting oxo or methoxo ligands and use solely the O-atom pattern of the polyol for the connection of the Re(I)(CO)(3) moieties.     

Spectroscopic control of the properties of organic substances and materials by the property-absorption coefficient correlations

We suggest the determination of some physicochemical properties of organic substances by the spectra of absorption in the UV and visible regions. Correlation equations are obtained which give the optimal correlation between the absorption coefficients at the analytical wavelengths or the integral intensity and the physicochemical properties. Ufa Technological Institute of Service, 145 Chernyshevskii St., Ufa, 450014, Bashkortostan. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 3, pp. 438–440, May–June, 1998.