Highly Stable Graphene Inks Based on Organic Binary Solvents

Formulating highly stable graphene-based conductive inks with consistency in electrical properties over the storage period has remained a significant challenge in the development of wearable electronics. Two highly stable graphene-based inks (Cyclohexanone:Ethylene glycol (CEG) ink and Cyclohexanone:Terpineol (CT) ink) are prepared by using two different organic binary solvents, for the first time, without using solvent exchange methods. Both the inks display remarkably high stability (stable even after two months) with negligible variability in electrical properties. Here, it is demonstrated how such inks can be utilized to coat flexible substrates to create wearable e-textiles. Both the inks coated e-textiles show significantly low sheet resistance (≈209.1 Ω □⁻¹ for CEG ink and ≈322.4 Ω □⁻¹ CT ink) that show less than a 15% increase in electrical resistance over two months. Therefore, these inks offer high productivity and reproducibility and can be one of the most effective methods for formulating graphene-based inks.     

充填不同气体相对论返波管特性的PIC-MCC模拟

讨论了PIC-MCC方法的基本原理以及在UNIPIC软件中的编程实现,并用该软件模拟了充填不同种类气体在不同气压下相对论返波管的气体电离过程,讨论了所产生的等离子体对电子束的传输以及波束相互作用的影响.给出了返波管输出功率、频率和起振时间随气体种类和气压等参数的变化情况.模拟结果表明,电离产生的阳离子是返波管性能改善的原因,而腔内滞留的低能电子是破坏返波管振荡而引起脉宽缩短的重要因素. 关键词： 蒙特卡罗碰撞 粒子模拟 高功率微波 相对论返波管     

高次非球面的工艺技术研究

 高次非球面在光学系统应用中意义重大,但是一直以来缺乏一套快速、有效的工艺方法。利用VC6.0编制了一款面型计算软件以辅助加工,并提出了一种新的高次非球面补偿检验方法。针对一块巡天光谱仪中口径Φ244 mm的一面平面另一面为高次非球面的改正镜开展工艺方法的设计与研究,从铣磨成形开始,根据高次非球面的特点提出了几种新型磨削工艺,建立相应的数学模型。由于高次非球面的特殊性,试验了数控铣磨直接成型法,很大程度上降低后继工艺难度,在细磨和抛光阶段采用数控小工具和整工具研磨相结合,能够很好地克服面型不平滑等技术难题。总结出了一套高效率、低成本、高精度的高次非球面工艺方法。     

宽光谱超大孔径反衍望远系统设计

二元光学元件具有许多传统光学元件无法比拟的优越性。利用2个二元光学元件作为系统的物镜和目镜,通过确定各元件的基本结构、孔径大小,设计了25m的超大孔径反衍混合望远系统。所设计系统的弥散斑大小及MTF函数都能够达到设计要求。使用谐衍射透镜代替普通衍射透镜,对系统进一步改进,使望远系统获得了较宽的光谱范围。试验结果表明:改进后的系统无论在单一光谱、多频带光谱或者连续光谱范围,都能够获得接近衍射极限的成像质量。     

基于磁光调制偏振光的空间方位失调角高精度测量新方法

调制偏振光可以作为方位信息的载体,实现方位角度信息的传递,在军事、航天和生物医药等领域有广泛的应用前景.阐述了基于磁光调制偏振光的方位失调角测量原理,分析了现有测量原理中的误差来源.为了从理论方法上提高测量精度,提出了直接计算的方法,将磁光调制后的光强信号直接进行取极值点处理,建立了失调角与极值点之间的方程,详细分析了...     

烧结金属纤维板大空间自然对流实验研究

实验研究了烧结金属纤维板在大空间下的自然对流换热,分析了倾角、孔隙率、纤维丝经、Ra数和金属纤维导热系数对换热性能的影响.实验结果表明:存在最优的角度(60°左右)使烧结金属纤维板的自然对流换热性能最好,但倾斜角度对烧结金属纤维板的换热影响没有光板显著;加热面的平均Nu数随着纤维直径和孔隙率的增加均先增加后减小;在实验...     

高压下三元金属间化合物SrAlSi的电学和晶格动力学特性

基于密度泛函理论的第一性原理方法,系统研究了三元金属间化合物SrAlSi在高压下的电子性质和晶格动力学性质.三元金属间化合物SrAlSi具有和MgB₂类似的六角蜂巢状结构,Sr原子取代了Mg原子的位置,Al、Si原子无序地占据B原子的位子.通过对SrAlSi三元金属间化合物能带和三维费米面的计算,发现在压力的作用下SrAlSi费米面附近的能带发生电子拓扑变化,压力可以导致电子拓扑结构相变(ETTs).通过晶格动力学研究发现,在压力的作用下,SrAlSi的光学支沿着A-L-H方向逐渐软化,声学支逐渐变硬,说明金属间化合物SrAlSi在压力作用下结构不是很稳定,随着压力的继续增大,会有新的结构出现.     

Dose estimation and shielding calculation for X-ray hazard at high intensity laser facilities

An ionizing radiation hazard produced from the interaction between high intensity lasers and solid targets has been observed. Laser-plasma interactions create "hot" electrons, which generate bremsstrahlung X-rays when they interact with ions in the target. However, up to now only limited studies have been conducted on this laser-induced radiological protection issue. In this paper, the physical process and characteristics of the interaction between high intensity lasers and solid targets are analyzed. The parameters of the radiation sources are discussed, including the energy conversion efficiency from laser to hot electrons, hot electron energy spectrum and electron temperature, and the bremsstrahlung X-ray energy spectrum produced by hot electrons. Based on this information, the X-ray dose generated with high-Z targets for laser intensities between 10¹⁴ and 10²⁰ W/cm² is estimated. The shielding effects of common shielding items such as the glass view port, aluminum chamber wall and concrete wall are also studied using the FLUKA Monte Carlo code. This study provides a reference for the dose estimation and the shielding design of high intensity laser facilities.     

Prototype of time digitizing system for BESⅢ endcap TOF upgrade

The prototype of a time digitizing system for the BESⅢ endcap TOF (ETOF) upgrade is introduced in this paper. The ETOF readout electronics has a distributed architecture. Hit signals from the multi-gap resistive plate chamber (MRPC) are signaled as LVDS by front-end electronics (FEE) and are then sent to the back-end time digitizing system via long shield differential twisted pair cables. The ETOF digitizing system consists of two VME crates, each of which contains modules for time digitization, clock, trigger, fast control, etc. The time digitizing module (TDIG) of this prototype can support up to 72 electrical channels for hit information measurement. The fast control (FCTL) module can operate in barrel or endcap mode. The barrel FCTL fans out fast control signals from the trigger system to the endcap FCTLs, merges data from the endcaps and then transfers to the trigger system. Without modifying the barrel TOF (BTOF) structure, this time digitizing architecture benefits from improved ETOF performance without degrading the BTOF performance. Lab experiments show that the time resolution of this digitizing system can be lower than 20 ps, and the data throughput to the DAQ can be about 92 Mbps. Beam experiments show that the total time resolution can be lower than 45 ps.     

Highly sensitive digital optical sensor with large measurement range based on the dual-microring resonator with waveguide-coupled feedback

We propose a novel high-performance digital optical sensor based on the Mach-Zehnder interferential effect and the dual-microring resonators with the waveguide-coupled feedback. The simulation results show that the sensitivity of the sensor can be orders of magnitude higher than that of aconventional sensor, and high quality factor is not critical in it. Moreover, by optimizing the length of the feedback waveguide to be equal to the perimeter of the ring, the measurement range of the proposed sensor is twice as much as that of the conventional sensor in the weak coupling case.