Structural response of high solidity net cage models in uniform flow

Hydrodynamic loads acting on a fish farm may be affected by the growth of different biofouling organisms, mainly due to increased solidity of the nets. In this paper, the hydrodynamic loads acting on high solidity net cage models subjected to high uniform flow velocities and the corresponding deformation of the net cages are studied. Model tests of net cylinders with various solidities were performed in a flume tank with a simulated current. Standard Morison-type numerical analyses were performed based on the model tests, and their capability of simulating the occurring loads and the observed net cage deformations for different flow velocities was evaluated.Large deformations of the net cage models were observed, and at high velocities the deformations were close to what is physically possible. Net cage deformation appeared to be less dependent on solidity than on flow velocity and weights. Drag forces increased with increasing flow velocity and were dependent on both bottom weights and netting solidity. For the lowest solidity net, drag forces were close to proportional to flow velocity. For the three high solidity nets, the measured drag forces were of similar magnitude, and drag increased less with increasing flow velocity above approximately 0.5 m/s than at lower velocities.This study shows that a basic reduced velocity model is not sufficient to model the interaction between the fluid flow and net (hydroelasticity) for high solidity net cages subjected to high flow velocities.The standard numerical analysis was in general able to make good predictions of the net shape, and was capable of making an acceptable estimate of hydrodynamic loads acting on the lowest solidity net model (Sn=0.19). For high solidities and large deformations, numerical tools should account for changes in water flow and the global drag coefficient of the net.     

Ab‐Initio study of Helium‐small carbon cage systems

The traditional method for opening the electron shells of noble gas atoms involves a strong electronegative atom or group. However, this approach is limited to only heavy noble‐gas atoms, such as Kr and Xe. In this paper, we performed accurate calculations of He@C₈H₈ and He@C10H16 and showed the possibility of opening the electron shell of a light noble‐gas atom. © 2012 Wiley Periodicals, Inc.     

Microwave-assisted methods for the synthesis of pentacyclo[5.4.0.0.0.0]undecylamines

Efficient methodologies for the preparation of pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane (PCU) amine derivatives are described via microwave-assisted synthesis. The obtained results revealed that microwave-assisted synthetic procedures under controlled conditions (power, temperature and time) are very convenient, high yielding, efficient and low-cost methods for the preparation of PCU amine derivatives. The new methods show several advantages including operational simplicity, good performance, significant reduction in reaction time, less by-product formation and easier purification.     

Columnar liquid crystalline benzenetrisamides with pendant 1,3,4-oxadiazole groups

Novel liquid crystal materials based on 1,3,5-benzenetrisamide derivatives with three pendant 2-phenyl-5-(mono-, di-, and/or tri-n-alkoxyphenyl)-1,3,4-oxadiazole arms (Ia–c, IIa–c) were prepared. The mesomorphic properties of these compounds were characterised and studied by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. The formation of a columnar mesophase was found to be dependent on the number of alkoxy side chains. The compounds Ib and IIb, with a total of six alkoxy chains, and compounds Ic and IIc, with nine alkoxy chains, exhibited an enantiotropic hexagonal columnar (Col_h ) phase with high isotropisation temperatures; however, compounds Ia and IIa with a total of three alkoxy chains formed a crystalline phase. Compounds IIb and c were room temperature liquid crystals.     

Ionic hexagonal columnar metallomesogens derived from tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine

A series of transition metal (Ni, Cu, Pd) complexes derived from macrocyclic tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine (TAAB) was synthesized and their mesomorphic properties studied by differential scanning calorimetry, polarized optical microscopy and X-ray powder diffraction (XRD). These compounds have eight alkoxy side chains attached around the central molecular core and form disc-like molecules. All the derivatives exhibited columnar mesophases over a wide range of temperature. The mesomorphic behaviour was found to be dependent on the incorporated metal and the carbon length of the alkoxy side chains. The clearing temperatures decreased in the order M = Ni > Pd > Cu; this decrease was probably due to the size of the metal ions. Some derivatives with shorter side chains (n = 10, 12) were room temperature liquid crystals. All compounds were found to exhibit hexagonal columnar (Col_h) phases which were confirmed by powder XRD.     

Cubic phases of binary systems of 4′-n-tetradecyloxy-3′-nitrobiphenyl-4-carboxylic acid (ANBC-14)-n-alkane

The phase behaviour of the binary systems 4′- ⁿ -tetradecyloxy-3′-nitrobiphenyl-4-carboxylic acid (ANBC-14)- ⁿ -alkane ( ⁿ -tetradecane or ⁿ -hexadecane) was investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The phase behaviour was a function of temperature ( ^T ) and the effective carbon number of the system ( ^n*), where ^n* involves carbon atoms both from the alkoxy group of ANBC-14 and from the ⁿ -alkane added. ANBC-14 shows no cubic phase, but the addition of ⁿ -alkane induced cubic phases when ^n*≧c. 15. An interesting point is that the type of cubic phase is ^Ia 3 ^d for 15^≦n*≦17, while an ^Im 3 ^m type is formed for 18^≦n*≦20. Furthermore, for ^n* = 22, two types of cubic phase, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d in the high temperature region, were observed both on heating and cooling. The phase diagram with respect to ^T and ^n* is very similar to that of pure one-component ANBC- ⁿ , which is a function of ^T and the number of carbon atoms in the alkoxy group ⁿ .     

Size‐Selective Encapsulation of Hydrophobic Guests by Self‐Assembled M4L6 Cobalt and Nickel Cages

Subtle differences in metal–ligand bond lengths between a series of [M₄L₆]^4? tetrahedral cages, where M=Fe^II, Co^II, or Ni^II, were observed to result in substantial differences in affinity for hydrophobic guests in water. Changing the metal ion from iron(II) to cobalt(II) or nickel(II) increases the size of the interior cavity of the cage and allows encapsulation of larger guest molecules. NMR spectroscopy was used to study the recognition properties of the iron(II) and cobalt(II) cages towards small hydrophobic guests in water, and single‐crystal X‐ray diffraction was used to study the solid‐state complexes of the iron(II) and nickel(II) cages.     

Self‐Assembled Tetragonal Prismatic Molecular Cage Highly Selective for Anionic π Guests

The metal‐directed supramolecular synthetic approach has paved the way for the development of functional nanosized molecules. In this work, we report the preparation of the new nanocapsule 3? (CF₃SO₃)₈ with a A₄B₂ tetragonal prismatic geometry, where A corresponds to the dipalladium hexaazamacrocyclic complex Pd‐1 , and B corresponds to the tetraanionic form of palladium 5,10,15,20‐tetrakis(4‐carboxyphenyl)porphyrin ( 2 ). The large void space of the inner cavity and the supramolecular affinity for guest molecules towards porphyrin‐based hosts converts this nanoscale molecular 3D structure into a good candidate for host–guest chemistry. The interaction between this nanocage and different guest molecules has been studied by means of NMR, UV/Vis, ESI‐MS, and DOSY experiments, from which highly selective molecular recognition has been found for anionic, planar‐shaped π guests with association constants (K_a) higher than 10⁹ M ^?1, in front of non‐interacting aromatic neutral or cationic substrates. DFT theoretical calculations provided insights to further understand this strong interaction. Nanocage 3? (CF₃SO₃)₈ can not only strongly host one single molecule of M(dithiolene)₂ complexes (M=Au, Pt, Pd, and Ni), but also can finely tune their optical and redox properties. The very simple synthesis of both the supramolecular cage and the building blocks represents a step forward for the development of polyfunctional supramolecular nanovessels, which offer multiple applications as sensors or nanoreactors.     

Nitro‐Substituted Bishomocubanes: Synthesis,Characterization, and Application as Energetic Materials

Several high‐energy‐density strained polycyclic compounds nitromethyl‐l,3‐bishomocubane (NMBHC), nitromethylene‐1,3‐bishomocubane (NMyBHC), and bis(nitromethyl)‐1,3‐bishomocubane (DNTMBHC), which were synthesized for the first time from bishomocubanone, hold potential for application as standalone fuels in liquid bipropellant systems or as additives in liquid and solid propellant formulations. DFT analysis at the B3LYP/6‐31G(d) level of theory was employed to optimize the geometries of the compounds and to determine their densities, heats of formation, and various thermodynamic properties. The density specific impulse, determined by using equilibrium thermodynamics, demonstrated an improvement of 75 s for NMBHC and NMyBHC over standard hydrocarbons. The specific impulse with ammonium perchlorate showed an improvement of 25–30 s over hydroxy‐terminated polybutadiene. Thermogravimetric analysis revealed that NMBHC, NMyBHC, and DNTMBHC evaporated readily with activation energies of 58.8, 69.2, and 74.5 kJ mol^?1, respectively.