Ag/CNT‐catalyzed hydroamination of activated alkynes with aromatic amines

As a nanoparticle support material, carbon nanotubes (CNTs) provide a certain potential activation of catalysis in heterogeneous catalytic organic reactions. Herein, an efficient Ag/CNT‐catalyzed synthesis of enamines via hydroamination of activated alkynes with aromatic amines has been described. This catalyst still retains catalytic activity after being recycled and reused three times. In addition, it represents a green and environmentally friendly process for preparation of enamines. Copyright © 2013 John Wiley & Sons, Ltd.     

Adhesive fracture of heterogeneous interfaces

We have studied the effect of interface heterogeneity on fracture, at both local and global scales. The single cantilever beam adhesion test was used to investigate interfacial fracture between polycarbonate plates and an elastic/fragile epoxy adhesive. Two surface treatments were applied to a (given) polycarbonate plate giving zones of strong and weak adhesion parallel to the crack direction. Calculated fracture energies differed from those expected from a simple rule-of-mixtures. A perturbation method, proposed by Rice, was used and results compared with crack fronts observed in situ. The technique was applied successfully but the difference in values of stress intensity factor between the zones was found substantially different from the experimental value. In an attempt to explain discrepancies, specimens with discontinuous crack fronts (adhesive and/or plates severed along the strong/weak adhesion frontier) were tested. Good agreement was found with the rule-of-mixtures predictions raising questions about the role of crack front continuity in load transfer.     

Thermally induced fixed diradical generation on solid supports for surface‐initiated polymerization

A method is presented for generation of all surface‐bound radicals on solid polymer surfaces. Thus, secondary amide group of newly synthesized crosslinking comonomer, methacryloyloxyethyl methacrylamide was determined as versatile precursor for generation fixed diradicals on solid microspheres, obtained by copolymerization with methyl methacrylate (MMA) in aqueous suspension. Nitrosoation of the secondary amide groups on the microbeads and followed thermolysis above 90 °C was demonstrated to give surface‐bound radicals, capable of initiating polymerization of vinyl monomers, such as; styrene, MMA, N‐vinyl formamide, and N‐vinyl, 2‐pyrrolidone, as evidenced by H NMR, Fourier transform infrared, thermogravimetric analysis, and differential scanning calorimeter techniques. Appreciable grafting yields (55.1%–286.1%) and low free‐homopolymer formation (7.2%–19.7%) were noted within 6 h of the grafting at 100 °C in each case. This strategy involving the use of amide functional crosslinker seemed to be generally applicable to generate surface‐bound radicals for surface‐initiated polymerization from various solid substrates. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

核壳Fenton催化剂CuFe_2O_4@PDA-Cu的制备、表征及其活化H_2O_2降解染料的性能

为得到新型高效多相催化剂,有效去除废水中的染料,以Cu(Ac)_2与CuFe_2O_4@PDA为原料制备了催化剂CuFe_2O_4@PDA-Cu.通过IR、XRD、XPS、UV-Vis、DRS技术对催化剂的性能进行了表征,考察了温度、H_2O_2用量、催化剂用量、pH值、盐等对催化活性的影响.利用HPLC测定降解产物,采用自由基捕获和抑制实验进行机理验证,发现催化剂是核壳结构.温度升高、pH值升高、H_2O_2和催化剂用量的增加均有利于提高催化活性;氯化物、硫酸盐、硝酸盐和磷酸盐不影响催化效果,溴化物和亚硝酸盐降低了催化效果.得到的最优降解条件为:T=30℃,催化剂用量10mg·L~(-1),pH=9,过氧化氢用量10mmol·L~(-1),染料浓度30mg·L~(-1).最优条件下催化剂可循环使用4次以上;甲基橙、茜素红和罗丹明B的去除率为100%;染料R0213、O0118和B0115的去除率大于60%.降解产物有草酸、马来酸和CO_2.甲基橙、茜素红和罗丹明B降解后COD_(Mn)=2~4mg·L~(-1).水杨酸捕获·OH生成2.5-二羟基苯甲酸,叔丁醇抑制染料降解.结果表明,催化剂可活化H_2O_2产生·OH,·OH攻击染料分子开环降解直至矿化.该研究为开发高效多相催化剂,有效去除废水中的染料提供了科学依据.     

多源异构土地基础数据一体化管理检索方法研究

为了从多源异构的复杂土地基础数据中快速准确地提取用户所需信息,提出了基于元数据的一体化管理检索方法.在元数据信息提取、元数据加权索引、实体同义词扩展检索3个环节中,结合土地领域专业知识和用户实际需求,设计和开发了共享元数据表结构、加权元数据中字段相对重要性和信息熵因子,构建地名实体和专题数据层实体同义词库,并集成到包括中文分词、实体识别、同义词扩展、索引检索和相似度计算的一体化管理检索框架中,解决了多源异构土地基础数据统一管理和精确检索的问题.实践表明,该方法较传统的通用信息检索方法具有更好的适用性和更高的准确率.     

Spin-polarized current and tunnel magnetoresistance in heterogeneous single-barrier magnetic tunnel junctions

Current in heterogeneous tunnel junctions is studied in the framework of the parabolic conduction-band model. The developed model of the electron tunneling takes explicitly into account the difference of effective masses between ferromagnetic and insulating layers and between conduction subbands. Calculations for Fe/MgO/Fe-like structures have shown the essential impact of effective mass differences in regions (constituents) of the structure on the tunnel magnetoresistance of the junction.     

Tunable wavelength filters using polymer long-period waveguide gratings based on metal-cladding directly defined technique

In this work, long-period waveguide grating-based tunable wavelength filters using organic–inorganic grafting poly(methyl methacrylate)(PMMA) materials are designed and fabricated by metal-cladding directly defined technique.The thermal stabilities and optical properties of the organic–inorganic grafting PMMA core materials are analyzed. Structures and performance parameters of the waveguide gratings and self-electrode heaters are designed and simulated. The contrast of the filter is about 15 d B and the resonant wavelength can be tuned by different electric powers applied to the metal-cladding self-electrode heaters. The temperature sensitivity is 3.5 nm/℃ and the switching time is about 1 ms. The technique is very suitable for realizing the optoelectronic integrated wavelength-division-multiplexing systems.