The polyphenolic profiles and antioxidant effects of Agastache rugosa Kuntze (Banga) flower,leaf, stem and root

Agastache rugosa Kuntze (Korean mint) is used as a spice and in folk medicine in East Asia. The present study identified a total of 18 polyphenols from the flower, leaf, stem and roots of this plant using high‐performance liquid chromatography–tandem mass spectrometry. Fourteen of these compounds had not previously been identified in these plant tissues. Each polyphenol was validated in comparison with external calibration curves constructed using structurally related compounds, with determination coefficients >0.9993. The limits of detection and quantification were 0.092–0.650 and 0.307–2.167 mg/L, respectively. Recoveries of 61.92–116.44% were observed at two spiking levels, with 0.91–11% precision, expressed as relative standard deviation (except anthraquinone spiked at 10 mg/L). Hydroxycinnamic acid was the most abundant compound in the root, while the flowers showed the highest total flavonoid level. Antioxidant activities, determined in terms of reducing power, Fe²⁺ chelating activity and the radical scavenging activities using α,α‐diphenyl‐β‐picrylhydrazyl and 2‐2?‐azino‐bis‐3‐ethylbenzothiazoline‐6‐sulfonic acid, increased in a concentration‐dependent manner; the highest activity was identified in the stems, followed by leaves > flowers > roots. These findings indicate that A. rugosa is a good source of bioactive compounds and can be used as a functional food. Copyright © 2015 John Wiley & Sons, Ltd.     

Digital Interferometric Measurement of Forced Convection Heat Transfer in a Miniature Rectangular Channel

Investigations have been performed on convective heat transfer in water flowing through mini-channels using the non intrusive technique of laser interferometry coupled with digital image processing. Optical glass channels, fabricated with metallic heating surfaces, were studied using a Mach-Zehnder interferometer configuration. Fringe patterns captured using a high-sensitivity CCD camera were analyzed digitally based on a calculation method developed for the liquid medium. Results of parametric studies were compared and contrasted with relevant theoretical solutions from the literature. Indication of the onset of turbulence at Reynolds numbers smaller than the conventional transition Reynolds number for large channels has also been noticed in the experimental investigation.     

Two stage electrostatic separator for the recycling of plastics from waste electrical and electronic equipment

The aim of study was to evaluate the effectiveness of a new facility for recycling of plastics from granular waste electrical and electronic equipment. The installation consists of two sections, the products of a first tribo-aero-electrostatic separator being subsequently treated in two free-fall electrostatic separators. The tests were performed on a mixture of polycarbonate (PC) and polyamide (PA). Analysis of the purity of the products obtained was performed using a program of image processing in MATLAB. Products of very high purity (roughly 95% for both PC and PA) were obtained at a recovery rate higher than 70%.     

蒸发器支撑板板孔精密测量系统

建立了蒸发器支撑板板孔精密测量系统,并提出了基于边缘约束条件的轮廓参量测量方法.首先采用图像处理技术将待测目标转化为二维离散坐标点,计算其最小外接矩形并对轮廓进行预定位;然后将轮廓分割成相互重合的"扩展邻域轮廓",建立以曲率角为原则的边缘约束算法对各轮廓段精确定界,实现对轮廓参量的精密测量.实验和误差分析表明,该系统测量准确度优于0.02mm,对具有复杂轮廓的零件参量测量有参考价值.     

Simultaneous quantification of ten Amadori compounds in tobacco using liquid chromatography with tandem mass spectrometry

Amadori compounds are aroma precursors formed in the initial phase of the Maillard reaction. Based on their similar structures, simultaneous quantification of more than six Amadori compounds in tobacco has not been reported yet. In this study, a simple and rapid method was developed to simultaneously quantify ten Amadori compounds including the isomers of Fructose‐isoleucine and Fructose‐leucine in tobacco. The separation was performed on an Atlantis T₃ column (2.1 × 250 mm, 5 μm) by gradient elution using acetonitrile and water as the mobile phases. The quantification method was systematically evaluated and proven to be sensitive and accurate. The linearity was good, with correlation coefficients of 0.9977–0.9999. The limits of detection and quantitation were 1.354–2.532 and 4.516–8.444 ng/mL, respectively. The recoveries were 84.0–119.6%, and the relative standard deviations were 1.33–5.40%. The method was used to analyze the changes in the amounts of ten Amadori compounds in tobacco before and after tobacco primary processing. The analysis shows that the Maillard reaction occurs during the short processing period.     

Evolution of downsized crescent-shaped dune in wind tunnel experiment

The migration of a downsized crescent-shaped dune was investigated in a wind tunnel experiment.Quantified upwind influx and vertical oscillation of the sand bed were introduced to modulate the saturation level of the sand flux above the dune surface to affect dune evolution.The evolution was recorded by top-view photography and then abstracted as the evolution of self-defined characteristic quantities using a digital image processing algorithm.The results showed that,in contrast to the case for spanwise quantities,the evolution of streamwise quantities corresponds to a linear increase in the modulation magnitude more positively and in a monotonic and convergent manner.In contrast with quantities on the windward face,the changes in quantities with respect to the horns were nonmonotonic with time and almost uncorrelated with the variation in modulation strength,which reveals the distinctiveness of leeside evolution.     

Implementation of a nonlinear filter for online nuclear counting

Nuclear counting is a challenging task for nuclear instrumentation because of the stochastic nature of radioactivity. Event counting has to be processed and filtered to determine a stable count rate value and perform variation monitoring of the measured event. An innovative approach for nuclear counting is presented in this study, improving response time and maintaining count rate stability. Some nonlinear filters providing a local maximum likelihood estimation of the signal have been recently developed, which have been tested and compared with conventional linear filters. A nonlinear filter thus developed shows significant performance in terms of response time and measurement precision. The filter also presents the specificity of easy embedment into digital signal processor (DSP) electronics based on field-programmable gate arrays (FPGA) or microcontrollers, compatible with real-time requirements. © 2001 Elsevier Science. All rights reserved.     

Practical guide for selection of 1H qNMR acquisition and processing parameters confirmed by automated spectra evaluation

In our recent paper, a new technique for automated spectra integration and quality control of the acquired results in qNMR was developed and validated (Monakhova & Diehl, Magn. Res. Chem. 2017, doi: 10.1002/mrc.4591 ). The present study is focused on the influence of acquisition and postacquisition parameters on the developed automated routine in particular, and on the quantitative NMR (qNMR) results in general, which has not been undertaken previously in a systematic and automated manner. Results are presented for a number of model mixtures and authentic pharmaceutical products measured on 500‐ and 600‐MHz NMR spectrometers. The influence of the most important acquisition (spectral width, transmitter [frequency] offset, number of scans, and time domain) and processing (size of real spectrum, deconvolution, Gaussian window multiplication, and line broadening) parameters for qNMR was automatically investigated. Moderate modification of the majority of the investigated parameters from default instrument settings within evaluated ranges does not significantly affect the trueness and precision of the qNMR. Lite Gaussian window multiplication resulted in accuracy improvement of the qNMR output and is recommended for routine measurements. In general, given that the acquisition and processing parameters were selected based on the presented guidelines, automated qNMR analysis can be employed for reproducible high‐precision concentration measurements in practice.     

A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899