Investigation of the influence of different commercial softeners on the stability of poly(lactic acid) fabrics during storage

We have studied the potential degradation of poly(lactic acid)-based fabrics treated with commercial softeners and stored under two sets of conditions for one year. Initial wet-processing caused a fall in molecular weight of about 28%, irrespective of after-treatment. Storage at 40 °C and 80% RH produced further degradation which, with few exceptions, was aggravated by the presence of softeners. Ultimately, all samples degraded beyond the point of commercial usefulness. No clear distinction could be made between the effects of softeners having differing compositions. In contrast, fabrics stored under milder conditions of 23 °C and 50% RH showed no significant time-dependent polymer degradation, irrespective of the treatment applied. There were slight changes in tensile properties and some evidence of physical structural effects having occurred, which we attribute to physical aging. However, we do not believe these to be so serious as to call into question the long-term viability of PLA-based textile products.     

Thermal analysis applied to the characterization of degradation in soil of polylactide: I. Calorimetric and viscoelastic analyses

An accelerated soil burial test has been performed on a commercial polylactide (PLA) for simulating non-controlled disposal. Degradation in soil promotes physical and chemical changes in polylactide properties, which can be characterized by Thermal Analysis techniques. Physical changes occurred in polylactide due to the degradation in soil were evaluated by correlating their calorimetric and viscoelastic properties. It is highly remarkable that each calorimetric scan offers specific and enlightening information. Degradation in soil affects the polylactide chains reorganization. A multimodal melting behavior is observed for buried PLA, degradation in soil also promotes the enlarging the lamellar thickness distribution of the population with bigger average size. Morphological changes due to degradation in soil lead to an increase in the free volume of the polylactide chains in the amorphous phase that highly affected the bulk properties. Thermal Analysis techniques provide reliable indicators of the degradation stage of polylactide induced by degradation in soil, as corroborated by molecular weight analysis.     

Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films

Transparent biaxial oriented poly(lactic acid) (BOPLA) films with improved dimensional stability were successfully prepared by controlling the crystallization of poly(lactic acid) (PLA). The crystalline morphology of PLA films can be manipulated by changing certain processing parameters, such as stretch ratio, heat setting temperatures, and heat setting time. Optical and mechanical properties as well as dimensional stability of the resulting polymer films are governed by their crystallinity and crystalline morphology. Crystallization behavior and kinetics of PLA, therefore, were investigated using wide angle X-ray diffraction (WAXD), small angle X-ray scattering (SAXS), and differential scanning calorimetry (DSC) techniques. Mechanical properties and the dimensional stability of the biaxial oriented PLA films were obtained and correlated with their processing conditions. Poly(lactic acid) films prepared by melt extrusion methods have great potential for food packaging, shrink labeling and protective film applications. However, shrinkage at elevated processing temperature should be minimized to avoid puckering of the polymer film. Shrinkage of less than 2% was achieved for a BOPLA film stretched 300% in both directions at 75 °C and then annealed at 160 °C for 30 s. Fabrication, properties, and potential applications of a series of biodegradable films will be described.     

Coarse‐grained A‐graft‐B model of poly(lactic acid) for molecular dynamics simulations

A mesoscopic model of poly(lactic acid) is developed where the polymer is represented as an A‐graft‐B chain with monomer units consisting of two covalently connected beads. A coarse‐graining algorithm is proposed to convert an atomistic model of PLA into a coarse‐grained one. The developed model is based on atomistic simulations of oligolactides to take into account terminal groups correctly. It was used for coarse‐grained simulations of polylactide. Gyration radii and end to end distances of polymer chains as well as the density of the polymer melt are shown to be in a good agreement with those obtained from atomistic simulations. The thermal expansion coefficients of the OLA melts calculated using the coarse‐grained model are in reasonable agreement with those obtained from all‐atom molecular dynamics. The model provides a 17‐fold speedup compared with atomistic calculations. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 604–612     

Visualization of spontaneous aggregates by diblock poly(styrene)‐b‐poly(L‐lactide)/poly(D‐lactide) pairs in solution with new fluorescent CdSe quantum dot labels

Spontaneous stereocomplex aggregation of diblock poly(styrene)‐b‐poly(L ‐lactide) PS‐b‐PLLA/poly(D ‐lactide) PDLA pairs has been investigated under ambient temperature in tetrahydrofuran solution. First, diblock PS₂₆₀‐b‐PLLA₁₆₅ and PS₂₆₀‐b‐PDLA₁₆₂ bearing similar lengths of respective PLLA and PDLA blocks were synthesized through controlled atom‐transfer radical polymerization of styrene, and a subsequent living ring‐opening polymerization of optically pure lactides, and their structures were further characterized by nuclear magnetic resonance spectroscopy (NMR) and gel‐permeation chromatography (GPC). Subsequently, new enantiomeric poly(D ‐lactide) stabilized core‐shell fluorescent CdSe quantum dots (CdSe/PDLA QD) were designed and prepared as sensitive fluorescence labels to shed new lights on the spontaneous stereocomplex aggregation in THF, which was mediated by stereocomplexation of the PLLA and PDLA chains. Upon simply mixing two individual THF solution of diblock PS₂₆₀‐b‐PLLA₁₆₅ and HO‐PDLA₃₀‐SH, spontaneous stereocomplex aggregation was studied, and the aggregated uniform spherical particles were observed by scanning electronic microscopy (SEM) to exhibit average particle diameters of 2.0 μm. Finally, utilizing the prepared CdSe/PDLA QDs as new fluorescent labels, morphologies of the spontaneous aggregates by new diblock PS₂₆₀‐b‐PLLA₁₆₅/HO‐PDLA₃₀‐SH pair were for the first time directly visualized by a confocal laser scanning fluorescence microscopy (CLSFM). These results might suggest alternative ways to simply prepare functional fluorescent particles with tunable diameter sizes and would be helpful to understand the mechanism of stereocomplex particle aggregation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1393–1405, 2009     

Effect of polyethylene glycol on the crystallization and impact properties of polylactide‐based blends

Polylactide (PLA) was plasticized by polyethylene glycols (PEGs) with five different molecular weights (M_w = 200–20,000 g/mol). The effects of content and molecular weight of PEG on the crystallization and impact properties of PLA were studied by wide‐angle X‐ray diffraction, differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, and V‐notched impact tests, respectively. The results revealed that PEG‐10,000 could significantly improve the crystallization capacity and impact toughness of PLA. When the PEG‐10,000 content ranged from 0 to 20 wt%, the increases in both V‐notched Izod and Charpy impact strengths of PLA/PEG‐10,000 blends were 206.10% and 137.25%, respectively. Meanwhile, the crystallinity of PLA/PEG‐10,000 blends increased from 3.95% to 43.42%. For 10 wt% PEG content, the crystallization and impact properties of PLA/PEG blends mainly depended upon PEG molecular weight. With increasing the M_w of PEG, the crystallinity and impact strength of PLA/PEG blends first decreased and then increased. The introduction of PEG reduced the intermolecular force and enhanced the mobility of PLA chains, thus improving the crystallization capacity and flexibility of PLA. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of Bottlebrush Polymers via a One‐Pot Ring‐Opening Polymerization (ROP) and Ring‐Opening Metathesis Polymerization (ROMP) Grafting‐Through Strategy

Bottlebrush polymers are synthesized using a tandem ring‐opening polymerization (ROP) and ring‐opening metathesis polymerization (ROMP) strategy. For the first time, ROP and ROMP are conducted sequentially in the same pot to yield well‐defined bottlebrush polymers with molecular weights in excess of 10⁶ Da. The first step of this process involves the synthesis of a polylactide macromonomer (MM) via ROP of d ,l ‐lactide initiated by an alcohol‐functionalized norbornene. ROMP grafting‐through is then carried out in the same pot to produce the bottlebrush polymer. The applicability of this methodology is evaluated for different MM molecular weights and bottlebrush backbone degrees of polymerization. Size‐exclusion chromatographic and ¹H NMR spectroscopic analyses confirm excellent control over both polymerization steps. In addition, bottlebrush polymers are imaged using atomic force microscopy and stain‐free transmission electron microscopy on graphene oxide.

     

Synthesis,characterization, and hydrolytic degradation of polylactide/poly(ϵ-caprolactone)/nano-silica composites

Poly(lactic acid) (PLA)/poly(?-caprolactone) (PCL)/nano-silica composite degradable films were prepared by a solvent casting method. SEM results showed that the nano-silica particles were dispersed uniformly in the PLA/PCL matrix. TGA results indicated that the thermal decomposition temperature rose with the increase of nano-silica content. The tensile strength of the composites was enhanced with the increase of nano-silica content up to 2%. The tensile strength increased with the silica content and reached its maximum (22.51 Mpa). The improvement in the water uptake ratio in the PLA/PCL/silica nanocomposites may be attributable to the presence of silica nanoparticles in the PLA/PCL matrix. After 15 weeks total processing time for the solution of alkaline and phosphate buffer, the performances of 16.23% and 3.65% for degradation.     

Biosynthesis of a lactate (LA)-based polyester with a 96 mol% LA fraction and its application to stereocomplex formation

A poly(lactic acid) (PLA)-like terpolyester consisting of 96 mol% lactate (LA), 1 mol% 3-hydroxybutyrate and 3 mol% 3-hydroxyvalerate was produced in recombinant Escherichia coli LS5218 expressing LA-polymerizing enzyme (LPE). The strain was grown on glucose with a feeding of valerate as the monomer precursor. The glass transition and melting temperatures of the terpolyester were close to those of chemically synthesized poly(L-LA)s (PLLAs) having similar molecular weights. Additionally, a blend of the terpolyester, which was composed entirely of (R)-LA (D-LA) due to the strict enantiospecificity of LPE, with PLLA formed a stereocomplex with higher melting temperature (201.9 °C). These results indicate that the biological PLA-like polyester produced via this one-step microbial process has comparable thermal properties to chemically synthesized PLAs.     

On the specificity of the amide VI band for the secondary structure of proteins

In this work we analyzed the specificity of the amide VI band for different types of secondary structure elements in protein structures. This band involves the bending motion of the CO group of the peptide chain that is typically observed in the spectral region from 590 to 490 cm⁻¹. The infrared absorbance spectra of a set of polypeptide model compounds of well known secondary structure was obtained at defined pH, including poly (l-lysine), poly (l-tyrosine), poly (l-alanine) and poly (l-histidine). In addition spectra of membrane proteins from the respiratory chain, namely the NADH:ubiquinone oxidoreductase, the cytochrome c oxidase and its Cu_A fragment, the cytochrome bc₁ complex, a Rieske-type protein and in addition myoglobin, have been comparatively investigated. The systematic analysis of the amide VI band of the polypeptides and the proteins allowed correlating the signal appearing at ∼525 cm⁻¹ to α-helical structures and signals at ∼545 cm⁻¹ to β-sheet contributions. Random coils have been found to contribute at ∼535 cm⁻¹ while the β-turns were observed at ∼560 cm⁻¹.