Flame‐retardant behavior of bi‐group molecule derived from phosphaphenanthrene and triazine groups on polylactic acid

The flame‐retardant polylactic acid (PLA) has been prepared via mixing the flame retardant TGIC‐DOPO derived from phosphaphenanthrene and triazine groups into matrix. The flame retardancy of TGIC‐DOPO/PLA composites was characterized using the limiting oxygen index (LOI), vertical burning test (UL94), and cone calorimeter test. Results reveal that the 10%TGIC‐DOPO/PLA composite obtained 26.1% of LOI and passed UL94 V‐0 rating. The flame‐retardant mechanism of PLA composites was characterized via thermogravimetric analysis (TGA), pyrolysis gas chromatography/mass spectroscopy, and TGA‐Fourier transform infrared. It discloses that TGIC‐DOPO promoted PLA decomposing and dripping early, and it also released the fragments with quenching and dilution effects. These actions of TGIC‐DOPO contribute to reducing the burning intensity and extinguishing the fire on droplets, thus imposing better flame retardancy to PLA. When TGIC‐DOPO was partly replaced by melamine cyanuric with dilution effect and hexa‐phenoxy‐cyclotriphosphazene with quenching effect in composites respectively, the results confirm that TGIC‐DOPO utilize well‐combination in dilution effect and quenching effect to flame retard PLA. Copyright © 2015 John Wiley & Sons, Ltd.     

Characterizations of modified cassava starch with long chain fatty acid chlorides obtained from esterification under low reaction temperature and its PLA blending

In contrast to typical starch esterification in an aqueous solution, which are carried out at elevated to ambient reaction temperatures, a low reaction temperature was applied in this study to minimize the starch chain hydrolysis. The physical properties of the modified starch, obtained from an esterification of cassava starch with long-chain fatty acid chlorides carried out in aqueous media at 4°C, were characterized using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and contact angle measurements. The modified starches show improvement in thermal stability and hydrophobicity, which can be further optimized by varying the types of acid chlorides and the reaction conditions. The starch products have high potential for use as fillers for biodegradable polymers, especially polylactic acid (PLA), as their tunable hydrophobicity can impose strong effect on controlling of the PLA's hydrolytic degradation rate for specific applications. Results on mechanical properties of the blends between the modified starch and PLA show an improvement in modulus of the polymer.     

Additive manufacturing approaches for biological power generation

As the consequences of global warming continue to affect the climate, there is an increased need for technologies that decrease dependence on fossil fuel consumption and promote sustainability. Additive manufacturing (AM) not only enables the scale-up and mass production of renewable energy technologies but also reduces cost and lead time, minimizes waste, and uses less energy than traditional manufacturing processes. Moreover, AM brings design and innovation to the forefront by allowing for design strategy revision and rapid prototyping. Herein, AM approaches used to fabricate devices that enable biological power generation are described. Biological power generation is a process through which biocatalysts – electroactive bacteria, enzymes, or cyanobacteria – harvest electrons from chemical substrates or light. Device engineering directs electron transfer events to a conductive material and maximizes power output. This review covers recent AM approaches for biological power generation in the form of microbial fuel cells (MFCs), enzymatic fuel cells, and biophotovoltaic cells with an emphasis on MFCs. Fabrication methods and materials for electrodes, chambers, inserts, membranes, and biofilms are described, along with impacts on device performance.     

Microneedles-based electrochemical sensors: New tools for advanced biosensing

Electrochemical biosensors are used worldwide as analytical tools from laboratory applications to market products. The performance of electrochemical sensing can be boosted by adopting the microneedle (MN) geometry as an innovative configuration of standard electrodes. MNs can be miniaturized, easily functionalized, and properly designed for specific aim monitoring, but most of all, they allow a low invasive controlling tool for growth and for environment influence in plant and a painless door to human body fluids where target analytes can be detected, overcoming the natural barrier of the skin. In this review, the very recent developments in MN-based electrochemical biosensing published in the literature are summarized.     

乳酸直接聚合的热力学、动力学研究

以乳酸单体为原料，在无催化剂存在和常压下直接缩聚合成聚乳酸，并研究了乳酸直接聚合的动力学，结合其热力学的分析，指出提高真空度脱除水分、控制合适的温度、选择合适的催化剂是获得高分子量聚乳酸的关键，为乳酸地接聚合工艺提供了理论参考。     

Compatibilization of Poly(Lactic Acid) (PLA)/Plasticized Cellulose Acetate Extruded Blends through the Addition of Reactively Extruded Comb Copolymers

In the perspective of producing a rigid renewable and environmentally friendly rigid packaging material, two comb-like copolymers of cellulose acetate (AC) and oligo(lactic acid) OLA, feeding different percentages of oligo(lactic acid) segments, were prepared by chemical synthesis in solvent or reactive extrusion in the melt, using a diepoxide as the coupling agent and were used as compatibilizers for poly(lactic acid)/plasticized cellulose acetate PLA/pAC blends. The blends were extruded at 230 °C or 197 °C and a similar compatibilizing behavior was observed for the different compatibilizers. The compatibilizer C1 containing 80 wt% of AC and 14 wt% of OLA resulted effective in compatibilization and it was easily obtained by reactive extrusion. Considering these results, different PLAX/pAC(100-X) compounds containing C1 as the compatibilizer were prepared by extrusion at 197 °C and tested in terms of their tensile and impact properties. Reference materials were the uncompatibilized corresponding blend (PLAX/pAC(100-X)) and the blend of PLA, at the same wt%, with C1. Significant increase in Young’s modulus and tensile strength were observed in the compatibilized blends, in dependence of their morphologic features, suggesting the achievement of an improved interfacial adhesion thanks to the occurred compatibilization.     

聚乳酸/壳聚糖季铵盐皂石纳米复合材料的原位插层聚合及性能表征

通过两步法将2,3-环氧丙基三甲基氯化铵接枝壳聚糖合成了水溶性壳聚糖季铵盐(HTCC),以其为插层剂对稀有的新疆皂石(Saponite)黏土矿物进行有机改性,制备了壳聚糖季铵盐皂石(HTCC-saponite),并以其为助剂,以丙交酯为单体,通过原位插层聚合法制备了聚乳酸(PLA)/HTCC-saponite纳米复合材料.最优化合成条件:聚合反应温度150℃,辛酸亚锡加量2%(质量分数),HTCC-saponite加量1%(质量分数)、聚合反应时间16 h.微观结构分析表明HTCC-saponite具有插层与剥离共存的结构.采用X射线衍射(XRD)、透射电子显微镜(TEM)、热重分析(TG-DTG)和差示扫描量热仪(DSC)等对PLA/HTCC-saponite纳米复合材料的微观结构、形貌及热稳定性进行了表征和分析.结果表明,HTCC-saponite有效改善了PLA的结晶性能,提高PLA的热稳定性.抗菌测试结果表明,HTCC-saponite具有良好的抗菌性,并赋予PLA/HTCC-saponite复合材料较强的抑菌能力.     

High-Resolution Solid-State NMR Characterization of Morphology in Annealed Polylactic Acid

Single-pulse ¹³C NMR spectra and spin-lattice relaxation times T₁(¹H), detected indirectly via ¹³C carbons, and T₁(¹³C) were measured at 31°C for virgin pelletized and annealed polylactic acid (PLA) samples using the magic-angle spinning technique. The structural relaxation resulting in more regular crystals with narrower conformation distribution and increase in the lamellae thickness and crystallinity brought about by annealing at 100°C was deduced from the narrowing of the ¹³C NMR lines and proton spin-lattice relaxation times T₁(¹H). The spin-lattice relaxation times T₁(¹³C) related to the respective carbons of the α-polymorph of PLA are also discussed in the study.     

离子色谱法测定聚乳酸(PLA)降解产物中3种有机酸阴离子

为了建立聚乳酸(PLA)降解产物中3种有机小分子酸阴离子[CH3CH(OH)COO-,CH3CH2COO-,CH3COO-]的离子色谱检验方法,将PLA降解第5天的产物过滤后用离子色谱检测,色谱条件:淋洗液为NaHCO3(6.0mmol/L);流速为1.0mL/min;检测器为电导检测器。实验表明对乳酸、甲酸、乙酸标准曲线的线性相关系数在0.991以上,3种离子的相对标准偏差(RSD)在0.9%～3.7%。方法具有方便、准确、成本低的特点。     

Polyethylene‐poly(L‐lactide) diblock copolymers: Synthesis and compatibilization of poly(L‐lactide)/polyethylene blends

A model polyethylene‐poly(L ‐lactide) diblock copolymer (PE‐b‐PLLA) was synthesized using hydroxyl‐terminated PE (PE‐OH) as a macroinitiator for the ring‐opening polymerization of L ‐lactide. Binary blends, which contained poly(L ‐lactide) (PLLA) and very low‐density polyethylene (LDPE), and ternary blends, which contained PLLA, LDPE, and PE‐b‐PLLA, were prepared by solution blending followed by precipitation and compression molding. Particle size analysis and scanning electron microscopy results showed that the particle size and distribution of the LDPE dispersed in the PLLA matrix was sharply decreased upon the addition of PE‐b‐PLLA. The tensile and Izod impact testing results on the ternary blends showed significantly improved toughness as compared to the PLLA homopolymer or the corresponding PLLA/LDPE binary blends. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2755–2766, 2001