Light olefins/paraffins sorption in poly(lactic acid) films

The sorption behavior of small molecules like ethane and ethylene in poly (lactic acid) (PLA) was studied in the temperature interval from 283 to 313 K using a Quartz Crystal Microbalance (QCM). The effect of the polymer structure on the solubility selectivity of PLA films with respect to these two gases was studied using polymer with two different L:D ratios (98:2 and 80:20). Furthermore, the polymer films were submitted to different thermal treatments to address the influence of crystallinity and morphology of the noncrystalline fraction on the sorption behavior. The sorption results obtained indicate that ethylene solubility coefficient in annealed PLA 98:2 is about 26% higher than that of ethane and 41% higher in PLA 98:2 melted. The dual‐mode sorption model describes well the sorption isotherms behavior, which is concave concerning the pressure axis. The fully amorphous PLA presents the better selectivity for the studied gases, since the crystallinity seems to produce a negative effect on the selectivity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1312–1319, 2008     

PAA对PLA流变性能和热性能的影响

通过熔融共混法制备了一系列的PLA/PAA共混物,考察了PLA/PAA共混体系的流变行为和热性能(结晶行为和热降解行为).FTIR测试结果证实PLA与PAA分子链之间形成了氢键网络.动态剪切流变测试和DSC测试均表明共混体系的流变行为和冷结晶行为会随着PAA含量的改变而改变,这可能是由于PLA与PAA的氢键作用受到PAA含量的影响.另外,DSC测试证实共混体系中的氢键网络还会受到试样热历史的影响.当PAA含量较低(低于5 wt%)时,PLA/PAA共混体系中PAA与PLA熔体两相的相分离不严重,使得PAA与PLA分子链能够较大限度地接触而形成较强的氢键作用,因而可以明显减缓增塑作用对黏度降低的影响.     

Mapping Enzyme Activity on Tissue by Functional Mass Spectrometry Imaging

Enzymes are central components of most physiological processes, and are consequently implicated in various pathologies. High‐resolution maps of enzyme activity within tissues therefore represent powerful tools for elucidating enzymatic functions in health and disease. Here, we present a novel mass spectrometry imaging (MSI) method for assaying the spatial distribution of enzymatic activity directly from tissue. MSI analysis of tissue sections exposed to phospholipid substrates produced high‐resolution maps of phospholipase activity and specificity, which could subsequently be compared to histological images of the same section. Functional MSI thus represents a new and generalisable method for imaging biological activity in situ.     

Effect of surface texturing on friction behaviour of 3D printed polylactic acid (PLA)

Additive manufacturing is gaining a remarkable importance in manufacturing industries because of the ability to build parts with complex and intricate shapes. The most widely used material in additive manufacturing is the polymer. In this paper, circular textures have been 3D printed on the surface of Polylactic Acid (PLA) polymer using fused deposition modelling technique. Experiments were performed under dry and lubricated conditions by varying the texture size. The results were obtained for high and low speeds with varying loads of 10, 20, 30, 40 and 50 N. It was observed that coefficient of friction was minimum for texture T₂ at both high and low speeds under dry sliding conditions. This is due to the less real area of contact than texture T₁ and more effective formation of transfer film in case of texture T_3. The entrapment of wear debris is more effective which helps in the formation of transfer layer that acts as solid lubricant. Under lubricated conditions, it was observed that for low speed, texture T₃ has least coefficient of friction while at high speed texture T₁ resulted in the minimum coefficient of friction. This is mainly due to the more retention of lubricating oil for texture T₃ at low speed in comparison to the high speed. Surface analysis carried out for all the textures under dry sliding conditions revealed that the wear is mainly to adhesive and abrasive action.     

Sustainability assessments of bio-based polymers

Bio-based polymers have become feasible alternatives to traditional petroleum-based plastics. However, the factors that influence the sustainability of bio-based polymers are often unclear. This paper reviews published life cycle assessments (LCAs) and commonly used LCA databases that quantify the environmental sustainability of bio-based polymers and summarizes the range of findings reported within the literature. LCA is discussed as a means for quantifying environmental impacts for a product from its cradle, or raw materials extraction, to the grave, or end of life. The results of LCAs from existing databases as well as peer-reviewed literature allow for the comparison of environmental impacts. This review compares standard database results for three bio-based polymers, polylactic acid (PLA), polyhydroxyalkanoate (PHA), and thermoplastic starch (TPS) with five common petroleum derived polymers. The literature showed that biopolymers, coming out of a relatively new industry, exhibit similar impacts compared to petroleum-based plastics. The studies reviewed herein focused mainly on global warming potential (GWP) and fossil resource depletion while largely ignoring other environmental impacts, some of which result in environmental tradeoffs. The studies reviewed also varied greatly in the scope of their assessment. Studies that included the end of life (EOL) reported much higher GWP results than those that limited the scope to resin or granule production. Including EOL in the LCA provides more comprehensive results for biopolymers, but simultaneously introduces greater amounts of uncertainty and variability. Little life-cycle data is available on the impacts of different manners of disposal, thus it will be critical for future sustainability assessments of biopolymers to include accurate end of life impacts.     

Synthesis,characterization, and degradation of poly(anhydride‐co‐amide)s and their blends with polylactide

In attempt to improve the properties of polyanhydrides based on aliphatic anhydrides, we synthesized novel polyanhydrides containing amide groups in the main chains. In this work, N,N′‐bis(L ‐alanine)‐sebacoylamide (BSAM) was prepared from natural amino acid and sebacic acid (SA) and characterized by IR and ¹H NMR. In addition, polymers of PBSAM, P[1,6‐bis(P‐carboxyphenoxy) hexane (CPH)‐BSAM], and P(CPH‐SA), blends of P(CPH‐SA)/polylactide (PLA), P(CPH‐BSAM)/PLA were also prepared and characterized by IR, gel permeation chromatography, and differential scanning calorimetry. The hydrolytic degradation of polyanhydrides and their blends with PLA (number‐average molecular weight = 2.90 × 10⁵) was evaluated in 0.1 M phosphate buffer pH 7.4 at 37 °C. The results indicate that the existence of amide, aromatic, and ester bonds in the main chain of polymers slows down the degradation rate, and the tendency becomes clearer with the increasing amount of them, and the copolymers and their blends with PLA possess excellent physical and mechanical properties. These can make them more widely used in drug delivery and nerve regeneration. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4311–4317, 2004     

Fundamental solution and single‐chain properties of polylactides

Polylactides (PLA) have been known for several decades and are recently of considerable commercial significance. However, the literature on basic chain properties and solution characterization is divided and inconsistent. In this study, a comprehensive and well‐controlled set of experiments is combined with rigorous quantitative analysis to resolve existing apparent contradictions. Homopolymers and copolymers spanning wide ranges of molecular weight and stereoisomer proportions were prepared by ring‐opening polymerizations of L ‐ and D ‐lactides using stannous octanoate as the catalyst. Samples were characterized by means of: (1) dilute‐solution viscometry in three different solvents; (2) size exclusion chromatography in tetrahydrofuran (THF) with light scattering detection; (3) static multiangle light scattering in a mixed acetonitrile–dichloromethane solvent; (4) variable‐angle spectroscopic ellipsometry; and (5) melt rheology. The data imply that PLA are typical linear flexible polymers; unperturbed PLA chain dimensions are describable in terms of a characteristic ratio of 6.5 ± 0.9, regardless of stereoisomer content. The Schulz‐Blaschke and Mark‐Houwink constants for dilute PLA solutions in chloroform and in THF are determined. For chloroform at 30°C, the correct values are k_SB = 0.302, K = 0.0131 (mL/g), and a = 0.759, while for THF at 30°C, the correct values are k_SB = 0.289, K = 0.0174 (mL/g), and a = 0.736. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3100–3111, 2005     

Influence of Storage Conditions on the Stability of Lactide

The objective following of the present study was to investigate the effect of different storage time and conditions on the stability of lactide. In this study the samples of lactide with different purities were stored under three various storage conditions and the compound integration was monitored for a period of 2 weeks. The storage conditions selected were (1) in the desiccator, (2) in the glove box under argon and (3) under ambient atmosphere. The purity of samples was performed on HPLC and Karl Fischer titration during all period of storage. It was shown that the initial purity of the lactide has a significant bearing on the lactide degradation.     

Micropatterning of Covalently Attached Biotin on Poly(lactic acid) Film Surfaces

A two‐step approach was used to micropattern covalently attached biotin on the surface of poly(lactic acid) (PLA) film. Poly(acrylic acid) (PAA) was micropatterned on PLA using photolithography in step 1, followed by carbodiimide wet chemistry to covalently attach biotin to acid groups in step 2. The PAA micropatterning reaction progression was monitored using attenuated total reflectance‐Fourier transform infrared (ATR‐FT‐IR) spectroscopy, water contact angle goniometry, and atomic force microscopy (AFM). The PAA‐biotin conjugation reaction characterization using XPS confirmed the carbodiimide mediated amidation reaction. The resultant PLA film was then immersed into a solution of fluorescence‐conjugated streptavidin and examined under fluorescence microscopy to reveal various micropatterns

     

Poly(lactic acid) Synthesis in Solution Polymerization

The step-growth polymerization of L-lactic acid in solution was studied in this work. In order to attain a polymer with high molecular weight, the water formed during the polymerization must be continuously removed. The use of organic solvents with high boiling point, drying agents and reduced pressure led to poly(lactic acid) (PLA) with high molecular weight, directly from the monomer. Tin (II) chloride dihydrate, SnCl₂.2H₂O, was the best of the catalysts tested as it allowed achieving PLA with a molecular weight close to 80 000 g.mol⁻¹. However, the stereoregurarity control is a severe problem in PLA synthesis by step-growth due to transesterification reactions, which lead to an inversion of the conformation and a decrease of the optical purity of the polymer. Specific rotation measurements were used in this work and showed to be a powerful technique to evaluate the racemization extent. The thermal stability of the PLA samples was evaluated by DSC which exhibits a thermal behaviour similar to the commercial Polylactide.