Solvent Effect in PLA-PEG Based Nanoparticles Synthesis through Surfactant Free Polymerization

Summary: In this work one-pot synthesis of PEGylated PLA-based nanoparticles (NPs) without using any surfactant has been performed. Adopting ring opening polymerization of L,L–Lactide and 2-hydroxyethyl methacrylate (HEMA), vinyl end functionalized poly(lactic acid) macromonomers (HEMA-LA_n) have been produced with tunable number of lactic acid units (larger than 5) and a low molecular weight distribution. Macromonomers have been further copolymerized with modified PEG chains (HEMA-PEG_m) through a monomer starved semi-batch emulsion polymerization performed without using any surfactant. In these conditions, small and monodispersed NPs of around 150 nm are obtained. Since macromonomers with n larger than 5 are highly viscous at room temperature, they have to be dissolved in a solvent before their injection in the reactor. In this work the effects in changing the solvent adopted in the starved process (water miscible or non-miscible) and its amount have been investigated. Moreover, the effect of both PEG chains concentration and MW on the final NPs properties has been elucidated. The colloidal stability of the NPs produced using different solvents has been verified in phosphate buffered saline (PBS) solution via dynamic light scattering measurements; in addition the critical coagulation concentration of these PEGylated NPs has been determined.     

Fragility of short-chain poly(lactic acid)s derivatives by combining dielectric spectroscopy and fast scanning calorimetry

Low-molecular-mass bio-polyesters, such as lactic acid oligomers, constitute a growing category of plasticizers for poly (lactic acid), since they show good compatibility and are respectful of the environment. This study focuses on the glass transition of a series of oligomers with different molecular weights, with the aim of investigating how their associated dynamics occur. Dielectric and calorimetric results are combined to study the molecular mobility in a large temperature range. In comparison with poly (lactic acid), the oligomers exhibit a lower fragility index and smaller cooperative rearranging regions. Among oligomers, the fragility is clearly dependent on the molecular weight, whereas the variations of the cooperativity are subtler.     

Crystallization and stereocomplexation governed self‐assembling of poly(lactide)‐b‐poly(ethylene glycol) to mesoscale structures

The stereocomplex formation between enantioselective poly(lactide) (PLA) homopolymers is well understood. In this report an attempt is made to analyze the influence on the self‐assembling of the stereocomplex of enantiomorphic PLA‐PEG di‐ and tri‐blocks in different solvents. Powder diffraction studies showed the poly(ethylene glycol) (PEG) and the PLA blocks crystallize separately forming unique supra structures like rods, discs and coiled coils with dimensions in the micrometer scale in length and sub‐micrometer scale in diameter. The influence of the solvents on the crystal formation was shown in the formation of uniform structures. Discs emerged from equimolar mixtures of the D ‐ and L ‐configured di‐ and tri‐block copolymers, in dioxan and acetonitrile and in water the stereocomplexes crystallized mainly as rods. In some cases the rods were observed as coiled coils. The shape, the hydrophobic/hydrophilic content and the PEG coated surface of the discs give them a future potential as matrix for the controlled and targeted delivery of bioactive agents. Copyright © 2005 John Wiley & Sons, Ltd.     

冠状动脉支架及其可降解高分子应用的研究进展

综述了近年来针对支架手术中再狭窄而采用的几种金属支架表面改性的方法与可降解医用高分子支架的发展、研究现状,其中包括对目前常用的可降解材料--聚乳酸进行了概述,以及应用有限元方法对可降解支架的支撑力进行的初步探索.     

Polylactic acid functionalization with maleic anhydride and its use as coupling agent in natural fiber biocomposites: a review

Abstract

Due to its renewability and biodegradability, biopolymers have developed interest in order to substitute oil-derived plastics. In particular, polylactic acid (PLA) is a promising biopolymer in terms of mechanical and biodegradable properties that is used for different applications. Nevertheless, PLA has some disadvantages like brittleness and processing instability. In order to overcome these drawbacks, it has been blended with natural fibers, leading to a fully biodegradable biocomposite material with enhanced properties. However, blending a hydrophobic biopolymer with hydrophilic fibers leads to poor interfacial adhesion producing interfacial voids, cavities and defects and consequently low performance properties. In this sense, this article reviews different strategies of biopolymer functionalization to improve compatibility in biocomposite materials. First, the effect of different parameters on biopolymers functionalization via melt and reactive extrusion processes is discussed. Finally, coupling efficiency of functionalized biopolymers is analyzed in terms of mechanical and thermal properties.     

Effects of Rice Straw Powder (RSP) Size and Pretreatment on Properties of FDM 3D-Printed RSP/Poly(lactic acid) Biocomposites

To develop a new kind of environment-friendly composite filament for fused deposition modeling (FDM) 3D printing, rice straw powder (RSP)/poly(lactic acid) (PLA) biocomposites were FDM-3D-printed, and the effects of the particle size and pretreatment of RSP on the properties of RSP/PLA biocomposites were investigated. The results indicated that the 120-mesh RSP/PLA biocomposites (named 120#RSP/PLA) showed better performance than RSP/PLA biocomposites prepared with other RSP sizes. Infrared results showed that pretreatment of RSP by different methods was successful, and scanning electron microscopy indicated that composites prepared after pretreatment exhibited good interfacial compatibility due to a preferable binding force between fiber and matrix. When RSP was synergistically pretreated by alkaline and ultrasound, the composite exhibited a high tensile strength, tensile modulus, flexural strength, and flexural modulus of 58.59, 568.68, 90.32, and 3218.12 MPa, respectively, reflecting an increase of 31.19%, 16.48%, 18.75%, and 25.27%, respectively, compared with unmodified 120#RSP/PLA. Pretreatment of RSP also improved the thermal stability and hydrophobic properties, while reducing the water absorption of 120#RSP/PLA. This work is believed to provide highlights of the development of cost-effective biocomposite filaments and improvement of the properties of FDM parts.     

The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

A carbodiimide-based additive, intended to stabilize PLA based materials to avoid hydrolytic degradation during processing, was incorporated into a series of PLA and nanofiller containing PLA films. The influence of the additive on the subsequent degradability of the materials was studied under the conditions of melt processing, biodegradation in compost and abiotic hydrolysis. Identical films without the additive were used as reference materials. Adding an anti-hydrolysis agent significantly retarded the decomposition of PLA in all the degradation processes tested. Both biodegradation and the abiotic hydrolysis of the PLA-based materials investigated were substantially retarded. This effect was much less pronounced in a material with organically modified montmorillonite.     

低含量聚乳酸对微孔发泡聚丁二酸丁二醇酯泡孔结构的改善

通过挤出制备了可生物降解聚丁二酸丁二醇酯(PBS)和3种聚乳酸(PLA)含量(7 wt%、15 wt%和20 wt%)的PBS/PLA共混物样品,采用超临界二氧化碳作为物理发泡剂对样品进行间歇发泡,研究发泡样品的泡孔结构,并分析其形成机理.在120oC发泡温度(Tf)下,借助PLA对PBS熔体黏弹性尤其是熔体强度的改善,获得了分布较均匀、形状较规则、直径较小(平均值约10μm)的微孔;共混物发泡样品的直径分布明显变窄,且符合高斯分布,这归因于细小的PLA相较均匀地分布于PBS基体中.进一步地,研究Tf对PBS和PLA含量为15 wt%的PBS/PLA共混物发泡样品泡孔结构的影响.结果表明,加入15 wt%的PLA使PBS的Tf下限从115oC降低至110oC,并显著改善了较高Tf(120和125oC)下制备的发泡样品内泡孔结构的均匀性.     

Synthesis and characterization of poly(lactic acid) and glucosamine-formaldehyde/dodecylbenzenesulfonate composite films

The composite films of poly(lactic acid) (PLA) doped with glucosamine(Gluc)-formaldehyde(FA) polymer/sodium dodecylbenzenesulfonate (SDBS) complexes at 1–5 wt% were synthesized to demonstrate striking improvement of their structural and mechanical properties. The polymer complexes were obtained by the hydrothermal polymerization of Gluc and FA at a molar ratio of 1:2 in the presence of SDBS. The atomic ratios of S in to N in (=S/N) in the polymer complexes limitedly range from 0.52 to 0.69, indicating that the complexation develops through the nonstoichiometric reaction between groups of (Gluc-FA) polymer and ones of SDBS and 31–48% of the groups remain unbound. The PLA composite film doped with 1 wt% (Gluc-FA)/SDBS showed the elongation-at-break of as large as 194% compared with 37% for PLA film, together with an appreciable increase of the crystallites size (D ₂₀₀) of PLA from 21.8 to 33.3 nm.     

Core‐stabilized polymeric micelle as potential drug carrier: increased solubilization of taxol

Poly(ethylene glycol‐b‐lactide) possessing a methoxy group at the poly(ethylene glycol) (PEG) chain end and a polymerizable methacryloyl group at the poly(lactic acid) (PLA) chain end (MeO–PEG/PLA–methacryloyl) was prepared by an anionic ring‐opening polymerization of ethylene oxide and DL ‐lactide in tandem manner initiated with a potassium 2‐methoxyethanolate, followed by end‐capping with an excess of methacrylic anhydride. The molecular weight of the obtained polymer was controlled by the initial monomer/initiator ratio, which was confirmed by the combination of gel permeation chromatography and nuclear magnetic resonance analyses. The functionality of the methacryloyl–PLA end was almost quantitative. The MeO–PEG/PLA–methacryloyl (38/35; these numbers in parentheses denote the molecular weights of PEG and PLA segments divided by 100, respectively) formed a core–shell type spherical micelle in aqueous media obtained by a dialysis technique, the cumulant diameter of which was ca. 30 nm with very low polydispersity factor. The methacryloyl group adjacent to the PLA was polymerized in the PLA core of the micelle. The polymerization proceeded thermally with radical initiator and photochemically with photo‐initiator to produce core‐polymerized nanoparticles, which was found by spectroscopic and light‐scattering techniques. Taxol‐incorporated micelles were prepared to entrap Taxol into MeO–PEG/PLA–methyacryloyl block copolymer micelles by the oil/water emulsion method. Copyright © 1999 John Wiley & Sons, Ltd.