Delta-8 Tetrahydrocannabinol Product Impurities

Due to increased concerns regarding unidentified impurities in delta-8 tetrahydrocannabinol (Δ-8 THC) consumer products, a study using Nuclear Magnetic Resonance (NMR), high performance liquid chromatography (HPLC), and mass spectrometry (MS) was conducted to further investigate these products. Ten Δ-8 THC products, including distillates and ready to use vaporizer cartridges, were analyzed. The results yield findings that the tested products contain several impurities in concentrations far beyond what is declared on certificates of analysis for these products. As Δ-8 THC is a synthetic product synthesized from cannabidiol (CBD), there are valid concerns regarding the presence of impurities in these products with unknown effects on the human body. Compounding this problem is apparent inadequate testing of these products by producers and independent laboratories.     

Scalable Preparation of Complete Stereo-Complexation Polylactic Acid Fiber and Its Hydrolysis Resistance

Due to their high sensitivity to temperature and humidity, the applications of polylactic acid (PLA) products are limited. The stereo-complexation (SC) formed by poly(L-lactic acid) (PLLA) and its enantiomer poly(D-lactic acid) (PDLA) can effectively improve the heat resistance and hydrolysis resistance of PLA products. In this work, the blended melt-spinning process of PLLA/PDLA was carried out using a polyester fiber production line to obtain PLA fiber with a complete SC structure. The effects of high-temperature tension heat-setting on the crystalline structure, thermal properties, mechanical properties, and hydrolysis resistance were discussed. The results indicated that when the tension heat-setting temperature reached 190 °C, the fiber achieved an almost complete SC structure, and its melting point was 222.5 °C. An accelerated hydrolysis experiment in a 95 °C water bath proved that the SC crystallites had better hydrolysis resistance than homocrystallization (HC). The monofilament strength retention rate of SC−190 fiber reached as high as 78.5% after hydrolysis for 24 h, which was significantly improved compared with PLLA/PDLA drawn fiber.     

Effect of Microwave Plasma Pre-Treatment on Cotton Cellulose Dissolution

The utilization of cellulose to its full potential is constrained by its recalcitrance to dissolution resulting from the rigidity of polymeric chains, high crystallinity, high molecular weight, and extensive intra- and intermolecular hydrogen bonding network. Therefore, pretreatment of cellulose is usually considered as a step that can help facilitate its dissolution. We investigated the use of microwave oxygen plasma as a pre-treatment strategy to enhance the dissolution of cotton fibers in aqueous NaOH/Urea solution, which is considered to be a greener solvent system compared to others. Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, and Powder X-ray Diffraction analyses revealed that plasma pretreatment of cotton cellulose leads to physicochemical changes of cotton fibers. Pretreatment of cotton cellulose with oxygen plasma for 20 and 40 min resulted in the reduction of the molecular weight of cellulose by 36% and 60% and crystallinity by 16% and 25%, respectively. This reduction in molecular weight and crystallinity led to a 34% and 68% increase in the dissolution of 1% (w/v) cotton cellulose in NaOH/Urea solvent system. Thus, treating cotton cellulose with microwave oxygen plasma alters its physicochemical properties and enhanced its dissolution.     

熔融纺丝制备中空纤维膜研究进展

中空纤维膜作为一种重要的分离膜材料,其制备方法一直以来是膜技术研究领域的热点。相对于溶液法纺丝制膜方法而言,熔融纺丝法具有使用溶剂量少、环境友好、所得中空纤维膜力学性能较优等特点,已成为目前中空纤维膜制备的重要技术之一。本文根据工艺将熔融纺丝制膜方法区分为熔融纺丝-拉伸法和热致相分离法,分别就这两种方法中空纤维膜的制备技术及致孔机理进行介绍,并对二者的研究历史及现状进行了论述,最后,还指出了熔融纺丝制备中空纤维膜研究领域有待解决的问题。     

Biochemical Characterization and In Vitro Digestibility of Protein Isolates from Hemp (Cannabis sativa L.) By-Products for Salmonid Feed Applications

Hemp (Cannabis sativa L.) processing by-products (hemp cake and hemp seed hulls) were studied for their protein content, extraction of protein isolates (PIs), and their in vitro protein digestibility (IVPD). Crude protein contents of hemp cake and hemp seed hulls were 30.4% and 8.6%, respectively, calculated based on generalized N-to-P conversion factor (N × 5.37). Extraction efficiency of PIs from defatted biomass ranged from 56.0 to 67.7% with alkaline extraction (0.1 M NaOH) followed by isoelectric precipitation (1.0 M HCl). Nitrogen analysis suggested that the total protein contents of PIs extracted using three different alkaline conditions (0.5 M, 0.1 M, and pH 10.0 with NaOH) were >69.7%. The hemp by-product PIs contained all essential amino acids (EAAs) required for fish with leucine, valine, and phenylalanine belonging to the five dominant amino acids. Overall, glutamate was the dominant non-EAA followed by aspartate. Coomassie staining of an SDS-PAGE gel revealed strong presence of the storage protein edestin. High IVPD of >88% was observed for PIs extracted from hemp seeds and by-products when evaluated using a two-phase in vitro gastric/pancreatic protein digestibility assay. PIs extracted from by-products were further tested for their antioxidant activities. The tested PIs showed dose-dependent DPPH radical scavenging activity and possessed strong ORAC values > 650 μM TE/g.     

一种全光归零码到非归零码变换的新技术方案

报道了一种利用单只半导体光放大器和光滤波器实现全光归零码到非归零码变换的新技术方案.当探测（Probe）光和数据信号光同时输入到SOA时,基于SOA中的交叉增益调制和交叉相位调制现象,探测光光谱的后沿和前沿将分别产生红移和蓝移.通过调节光滤波器和探测光的中心波长之间的失调量,滤出光谱的特定部分,可以得到转换后的NRZ码光信号.这种新型的全光码型变换器具有结构简单、偏振不敏感、控制参量少和稳定性高的特点.分别采用仿真和实验的方式实现了20 Gbit/s光数据信号从RZ码到NRZ码的全光码型变换,并且仿真结果和实验结果相吻合.     

全合成法光纤预制棒制造研究

介绍了一种全新的全合成法G.655和G.656光纤制造工艺,详细分析了该工艺中芯层折射率差Δ0、芯层厚度a、第二包层的折射率差Δ2、第二包层的厚度c2等结构参量与光纤光学性能的关系.结果表明,制造该两种光纤时,Δ0应在0.012 0～0.015 5之间,Δ2应在0.014 0～0.023 0之间,a应在2.8～3.2 μm之间,c2应在满足截止波长的要求下尽可能小.     

激光诱导炽光法与消光法诊断烧蚀羽烟消光性能

为了研究流场中碳纤维增强环氧树脂复合材料在激光辐照时产生的烧蚀羽烟对入射激光的屏蔽效应,通过对朗伯-比尔定律进行分析,得到了评价羽烟消光性能的平均质量消光系数的表达式,其与羽烟场浓度和激光透过率相关。采用激光诱导炽光法（LII）和激光消光法,搭建了羽烟消光性能联合诊断实验平台,使待测激光落于LII的激发光平面上,通过同步采集待测激光的透过率和LII信号,获得激发光平面上羽烟浓度场和激光消光比,得到羽烟在不同气流速度下的平均质量消光系数。实验得到气流速度为7,10,20 m/s时羽烟对1064 nm激光的归一化质量消光系数分别为2.51,1.08,1.00。实验发现,质量消光系数受到气流速度影响,当气流速度较低时质量消光系数曲线波动幅度大,且曲线均值较大;当气流速度较高时质量消光系数趋于稳定且均值较小。     

28 W环绕式高密度注入波导激光器

报道了一种新型结构形式的环绕式高密度注入波导激光器原理样机。采用环绕式高密度侧面注入技术,利用经过特殊工艺处理的裸增益光纤,当注入泵浦功率320 W时,获得了最高输出功率为28 W的连续激光,斜率效率20%,中心波长1080 nm。结果表明,环绕式高密度注入波导结构形式是可行的,且输出功率和斜率效率具有较大的提升空间。     

Nutritional Attributes and Phenolic Composition of Flower and Bud of Sophora japonica L. and Robinia pseudoacacia L.

Sophora japonica L. (SJL) and Robinia pseudoacacia L. (RPL) are widely cultivated in China. However, the utilization of their main by-products are limited due to a lack of comprehensive nutritional attributes. Herein, the proximate composition, mineral elements, fatty acids, amino acids, monosaccharides, and phenolics were analyzed to investigate the nutritional attributes of SJL and RPL. Dietary fiber was the main ingredient in SJL and RPL, followed by protein and lipids. The content of Fe in SJL and RPL was highest, especially in flowers of SJL, reaching about 1179.51 mg/kg. The total unsaturated fatty acids accounted for 89.67% of the bud of SJL. Meanwhile, the essential amino acids contents of the flower and bud of SJL and RPL accounted for 35.95–40.59% of total amino acids. The flower of SJL (373.75 mg/g) exhibited the most abundant monosaccharides. Meanwhile, the total phenolics and flavonoid contents in the buds of SJL and RPL were significantly higher than that of the flower, implying the buds possessed better biological activity. Moreover, the bud of SJL possessed the most abundant phenolics. The results provided a reference for the development of functional food derived from SJL and RPL.