Thermosetting resins from a tetra-functional vinylbenzene compound possessing cyclic siloxane cores

Cyclic siloxane is an attractive building block for incorporation of silicon-containing units as well as their distinguished properties to polymer materials. This work reports the synthesis and characterization of a tetra-functional vinylbenzene compound possessing cyclic siloxane cores (cD₄-4VB). Synthesis of cD₄-4VB is carried out using cD₄-4SiH as the reactive precursor and multiple-step reactions, including hydrosilylation, deacetylation, and S_N2 substitution. cD₄-4VB is an effective monomer for preparation of the corresponding cyclic silicon-based thermosetting resins (CR-cD₄-4VB). CR-cD₄-4VB shows attractive film formability and good thermo-mechanical properties, including a storage modulus of 2.0 GPa, a glass transition temperature of 282°C, a thermal stability above 400°C, a high char yield (at 800°C in nitrogen) of 55 wt%, and a dielectric constant of 3.12 at 10 GHz. This kind of resins have potential of application for halogen-free flame retardants and high-performance polymer films.     

Lignin and Lignin-Derived Compounds for Wood Applications—A Review

Improving the environmental performance of resins in wood treatment by using renewable chemicals has been a topic of interest for a long time. At the same time, lignin, the second most abundant biomass on earth, is produced in large scale as a side product and mainly used energetically. The use of lignin in wood adhesives or for wood modification has received a lot of scientific attention. Despite this, there are only few lignin-derived wood products commercially available. This review provides a summary of the research on lignin application in wood adhesives, as well as for wood modification. The research on the use of uncleaved lignin and of cleavage products of lignin is reviewed. Finally, the current state of the art of commercialization of lignin-derived wood products is presented.     

Synthesis and Structural Characterization of Butadienylcalcium-based Heavy Grignard Reagents and a Ca4[O] Inverse Crown Ether Complex

The structure elucidation of heavy Grignard reagents (RAeX, Ae=Ca, Sr, and Ba, X=halides) has been greatly strived after, mainly because of their inaccessibility and remarkable instability. The synthesis of a series of butadienylcalcium compounds is presented, including 1-calcio-4-lithio-1,3-butadiene, 1,4-dicalcio-1,3-butadiene, and a Ca₄[O] inverse crown ether complex, via the reaction between 1,4-dilithio-1,3-butadienes and calcium iodide in THF. Single-crystal X-ray analysis of these unprecedented heavy Grignard reagents revealed unique structural characteristics and bonding modes. Preliminary reaction chemistry was investigated. This study provides a novel class of alkenyl heavy Grignard reagents and a useful synthetic strategy for otherwise unavailable reactive organometallic compounds.     

Projectile fragment emission in the fragmentation of 56Fe on C,Al and CH2 targets at 471 A MeV

The emission angle and the transverse momentum distributions of projectile fragments produced in the fragmentation of 56Fe on CHs, C and A1 targets at 471 A MeV are measured. It is found that for the same target, the average value and width of the angular distribution decrease with an increase of the projectile fragment charge; for the same projectile fragment, the average value of the distribution increases and the width of the distribution decreases with increasing the target charge number. The transverse momentum distribution of a projectile fragment can be explained by a single Gaussian distribution and the averaged transverse momentum per nucleon decreases with the increase of the charge of projectile fragment. The cumulated squared transverse momentum distribution of a projectile fragment can be explained well by a single Rayleigh distribution. The temperature parameter of the emission source of the projectile fragment, calculated from the cumulated squared transverse momentum distribution, decreases with the increase of the size of the projectile fragment.     

Die Untersuchung einer Laboratoriumsanlage nach dem Heiß-Kalt-System mit einfachem Durchfluß der Fluide

Es wird ein Heiβ-Kalt-System mit einfachem Durchfluβ der Fluide untersucht. Dabei wird gezeigt, daβ zwischen den Isotopenkonzentrationen des Gases und der Flüssigkeit lineare Beziehungen bestehen. Eine Möglichkeit zur experimentellen Bestimmung der realen Werte der Parameter der Kolonne wird angegeben.     

基于油藏实际的稠油层内水热催化裂解机理研究

开展了稠油层内水热催化裂解技术在胜利油田的先导实验,五口井平均周期单井增油653 t,稠油初期降黏率达79.8%,措施14周后降黏率仍大于62%。利用Brookfield DV-Ⅲ黏度计、ElementarVario EL III元素分析仪、Knauer K-700蒸气压渗透仪、Agilent 6890N气相色谱仪和EQUINOX 55傅里叶变换红外光谱仪等,对措施前后稠油的物化性质进行分析。结果表明,层内水热催化裂解后稠油黏度及平均分子量减小、轻烃含量增加、重质组分含量减少、氢碳原子比增加、杂原子含量减小。稠油层内裂解反应受催化剂体系、高温水及储层矿物因素控制,催化剂是促进稠油裂解的主要因素,供氢剂及分散剂等助剂有助于提高裂解效果,高温水的酸碱性质及储层矿物对稠油具有催化裂解作用。多因素协同作用下使稠油发生脱侧链、分子链异构、断链、加氢、开环、成环、脱硫等系列反应,使得稠油大分子分解成小分子物质,降低了稠油黏度,改善了稠油品质,证实该技术在现场应用中具有可行性。     

Medium modified fragmentation function: equivalence of the ACSX and QW formalisms in the high-Q2 region

We study the medium modified fragmentation function in high-energy heavy-ion collisions. We show that the ACSX and QW formalisms are equivalent to each other in the high-Q² limit in both theoretical and numerical aspects.     

pH-Responsive Nanocomposites From Methylcellulose and Attapulgite Nanorods: Synthesis,Swelling and Absorption Performance on Heavy Metal Ions

A pH-responsive methylcellulose-g-poly(sodium acrylate)/attapulgite (MC-g-PNaA/APT) nanocomposite superabsorbent was prepared by the free-radical solution polymerization of methylcellulose (MC), sodium acrylate (NaA) and nanoscale attapulgite (APT) in the presence of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The structure and morphology of the nanocomposite were characterized by FTIR, FESEM, TEM, XRD and EDS techniques, and the effects of the amount of MBA, MC and APT nanorods on swelling behaviors were also evaluated. Results indicate that NaA has been grafted onto MC macromolecular chains and APT nanorods participated in polymerization by its active silanol groups, and APT led to a better dispersion in the MC-g-PNaA matrix. The incorporation of APT clearly enhanced the swelling capacity and rate of the superabsorbent. In addition, the nanocomposite exhibited excellent absorption capacity on heavy metal ions, and its absorption amounts on Ni²⁺, Cu²⁺ and Zn²⁺ ions reached 9.86, 7.66 and 21.86 times greater than active carbon (AC). The biopolymer-based nanocomposite superabsorbents can be used as a potential water-saving material and candidate of AC for heavy metal ion absorption.     

Preparation of Iminoacetic Acid-type Composite Chelating Material IAA-PEI/SiO2 and Preliminary Studies on Chelating Adsorption Property towards Heavy Metal Ions

Polyamine polyethyleneimine (PEI) was first grafted on the surfaces of micro-sized silica gel particles in the manner of the coupling graft (the manner of “grafting to”), forming the grafting particles PEI/SiO₂. Subsequently, via a polymer reaction, the nucleophilic substitution reaction between the primary and secondary amino groups of the grafted PEI macromolecule and chloroactic acid (CAA), iminoacetic acid groups were bonded onto the grafted PEI chains, and an iminoacetic acid (IAA)-type composite chelating material, IAA-PEI/SiO₂, was formed. In this work, the preparation process of IAA-PEI/SiO₂ particles was mainly researched, and the effects of the main factors on the polymer reaction, i.e., the nucleophilic substitution reaction, were examined emphatically. The adsorption behavior of IAA-PEI/SiO₂ particles towards several kinds of heavy metal ions was preliminarily evaluated. The experiments results show that it is feasible to introduce IAA groups onto PEI/SiO₂ particles via the substitution reaction between CAA and the amino groups of the grafted PEI. The reaction rate is affected greatly by the feed ratio of the amino group of PEI to CAA, so the substitution reaction between CAA and the amino groups of the grafted PEI is a bimolecular nucleophilic substitution reaction (S_N2). The reaction temperature and the used amount of acid-acceptor NaHCO₃ affect the bonding rate of IAA groups greatly. The fitting temperature was 60°C, and 1:1 of the molar ratio of NaHCO₃ to CAA was an appropriate amount of acid-acceptor NaHCO₃. Under the above optimal reaction conditions and with 3:1 molar ratio of amino group of PEI to CAA, 72% of the IAA group bonding rate (it is based on the hydrogen atoms in the primary and secondary amino groups of the grafted PEI) in 8 h can be reached. The composite chelating material IAA-PEI/SiO₂ possesses a strong chelating adsorption ability for heavy metal ions because of the increase of the ligands and formation of stable five-membered chelate rings.