On estimating pressure build-up in severely accelerated,shocked flow

A new approach to the calculation of the high pressures characterizing the flow field in front of a piston undergoing severe acceleration over the short term is presented. In contrast with previous approaches where the computational domain is altered but which stop short of transforming velocities, here the problem is solved in an accelerating non-Euclidean co-ordinate system where the piston is stationary. The method is applied to a study of the problem of premature sabot separation. Through use of Harten's second-order-accurate TVD scheme, flow simulations are performed for both 1D and 3D axisymmetric geometries. The simple 1D model gives pressure profiles surprisingly close to those of the more physical 3D model.     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

Features of the Motion of a Gas-Liquid Medium in a Compound Shell (Sphere and Truncated Cone) Subject to Vibration

The results from an experimental study into the dynamic behavior of a gas-liquid medium and solid particles in a compound shell (sphere-truncated cone) are reported on. The following processes are studied: formation of gas bubbles and their clusters, strong macroflows, and intensive chaotic motion of the medium in the truncated cone as a nonlinear vibrating liquid-gas system__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 112–118, January 2005.     

19F+27Al深部非弹性碰撞产物的角分布

完成了19F+27Al深部非弹性碰撞产物的角分布测量.初步分析了反应产B,C,N,O,F,Ne,Na,Mg和Al的实验室系角分布,展现出深部非弹性反应机制的特点,显示了反应系统随时间的演化过程. Angular distributions of fragments produced in the deep inelastic collision of~(19)F+~(27)Al have been measured for incident energy of 114 MeV at θ_(lab)= 9~(o), 24~(o), 40~(o), 55~(o), 70~(o) and 85~(o). Angular distributions of dissipative products B, C, N, O, F, Ne, Na, Mg and Al are analyzed to provide an evolution process of the intermediate dinuclear system formed in the reaction.     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Quantum-Chemical Evaluation of the Protolytic Properties of Thiophenols

The enthalpies and free energies of proton affinity (PA) were calculated by the PM3 method for 27 thiophenoxide anions. For thiophenols, linear correlation has been found between the PAs and the values of pK _a measured by different authors in aqueous acetone, aqueous ethanol, and methanol media. The dependences found permit one to predict a priori the protolytic properties of thiophenols. The differential effects of aqueous ethanol media with different ethanol contents on thiophenol acidity were evaluated based on quantum-chemical data.Original Russian Text Copyright © 2004 by A. N. Pankratov and A. V. Shalabai__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 800–806, September–October, 2004.     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.     

Stress and heat flux stabilization for viscous compressible medium equations with a nonmonotone state function

We study a system of quasilinear equations describing one-dimensional flow of a viscous compressible heat-conducting medium with a nonmonotone state function and mass force. The large-time behavior of solutions is considered for arbitrarily large initial data. In spite of possible nonuniqueness and discontinuity of the stationary solution, we prove L²-stabilization for the stress and heat flux as t → ∞ along with corresponding global energy estimates for them. The new method of proof utilizes a combination of energy type equalities for the stress and heat flux. Consequently, H¹-stabilization of the velocity and temperature along with global estimates for their derivatives are valid as well.     

Radiation Transfer in a Binary, Stochastic Medium with Strongly Fluctuating Parameters

The propagation of radiation in a three-dimensional, inhomogeneous, stochastic, scattering medium and in an equivalent homogeneous medium has been investigated by the small-angle iteration method. The statistical structure of the scattering parameters of a three-dimensional medium has been described within the framework of the two-dimensional Poisson process and the binary Markov process. The analytical data obtained point to the fact that the three-dimensional inhomogeneity of a stochastic medium significantly influences the radiation transfer in it.