Thermal behaviour and slow molecular mobility in two isomers of biphenylmethanol

This research was aimed to investigate the role of clay on the combustion and kinetic behavior of crude oils in limestone matrix. For this purpose, simultaneous TG (thermogravimetry) and DTA (differential thermal analysis) experiments were performed at three different heating rates as 10–15 and 20°C min^–1, respectively. A uniform trend of decreasing activation energies was observed with the addition of clay. It was concluded that clays surface area affects the values of Arrhenius constant, while it is the catalytic properties of clay, which lower the activation energies of all the reactions, involved in the combustion process.     

Ternary and tetrahedral symmetry in hybrid fluorides, fluoride carbonates and carbonates

Tren amine cations and carbonate anions adopt a ternary symmetry while tetra amine cations are tetrahedral. The symmetry of these constitutive ions influences strongly the nature of the solids which crystallise from solutions. Large fluorinated aluminate polyanions with tetrahedral symmetry appear in the presence of tren amine, while infinite chains of AlF₆ octahedra are observed with tetra amine and that noncentrosymmetric structures are frequently encountered in rare earth fluoride carbonates.     

Calibration of a quenching and deformation differential dilatometer upon heating and cooling: Thermal expansion of Fe and Fe-Ni alloys

Dilatometry is a technique for precise measurement of thermal dilatation of materials during heating or cooling. A procedure has been presented for calibration of a differential dilatometer operating with electromagnetic heating for metallic specimens both upon heating and cooling as well as under uniaxial compressive and tensile loading. The dilation signal has been calibrated for both heating and cooling and for uniaxial loading (compressive and tensile) using platinum or iron reference specimens, for which recommended dilational data are available. The ferro- to paramagnetic transition (characterised by the Curie temperature) of pure iron or iron-based alloys has been adopted to calibrate the temperature in the dilatometric measurement under different loading modes during heating and cooling. On this basis calibrated data for the thermal expansion coefficients of Fe and Fe-Ni alloys have been obtained.     

二水草酸锌脱水的热分解动力学研究

提出一种多升温速率-等温法确定机理函数g(α)的新方法;并用迭代的等转化率法求出较为可靠的活化能Ea;在Ea和g(α)的基础上计算出指前因子A.用该法对二水草酸锌（ZnC2O4•2H2O）脱水反应的热分解动力学三因子进行了求算,得出Ea为87.22 kJ•mol－1, A为4.2120×108～7.2328×108 s－1;以及随机成核和随后生长型机理函数Am（Avrami-Erofeer）,其积分形式g(α)=[－ln(1－α)] 1/m和微分形式f(α)=m(1－α)•[－ln(1－α)](1－1/m),调节因子m=1.85～2.00.     

微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。     

Microwave-assisted synthesis of new pyrimido[4′,5′：4,5]thiazolo[3,2-α] benzimidazol-4（3H）-one derivatives in solvent-free condition

Microwave-assisted synthesis of new 2-arylpyrimido[4′,5′：4,5]thiazolo[3,2-α]benzimidazol-4（3H）-ones from 3-aminothia- zolo[3,2-α]benzimidazol-2-earboxamide and aroyl halides in solvent-free condition is described. In comparison with classical conditions the reactions are faster and the yields are higher under microwave irradiation.     

Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.     

Zinc-catalyzed Williamson ether synthesis in the absence of base

Zinc powder was found to be a highly efficient catalyst for the synthesis of aromatic ethers using microwave heating in the presence of N,N-dimethylformamide as well as under stirring in an oil-bath using tetrahydrofuran as solvent without any inorganic base. This method can be used for selective mono-, di- or tri-O-alkylations.     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.