风冷热泵冷热水机组动态过程仿真

本文给出了风冷热泵冷热水机组动态过程模型。系统的高、低压段被分成制冷剂侧、管壁、以及水或空气侧三个控制容积。针对每个控制容积建立了质量和能量平衡的微分方程。由于压缩机、热力膨胀阀阀体、以及四通换向阀具有较小的热惯性,因而采用稳态模型描述压缩过程、膨胀过程、以及内泄露过程。膨胀阀感温包中的制冷剂温度对于蒸发器出口温度的延迟用一阶惯性环节来描述。通过“预测-校正”和“自适应步长”方法实现系统仿真。仿真结果与测试数据吻合良好。     

Si微电阻桥温度分布与热传导特性的显微Raman光谱研究

采用显微Raman光谱方法对红外目标模拟器中重掺杂Si微电阻桥单元的热传导特性进行研究，根据Si桥的实际特性建立相应的Raman散射模型，通过测量Raman峰位的移动得到高功率激光辐照下测量点的温度.对Si桥桥面分别进行了沿某些特殊线段的逐点线扫描和覆盖全部桥面的面扫描，得到各点的温升及其分布.用基于有限元分析的软件结合Si桥结构参数对各测量点的温升进行了模拟计算，其结果在热导分布的基本趋势上与实验相一致.实验细致地揭示了热导分布的局域起伏，反映出实际器件的不均匀性，为改进器件设计、优化器件性能提供了实验依据. 关键词： Raman光谱 Si桥 温度分布 热导     

新型制冷机冷凝器壳侧的传热强化研究

针对现行制冷机冷凝器的不足 ,设计了适用于冷凝传热的新型折流杆冷凝器的壳程内部结构 ,并分析了其传热强化机理。在重力控制条件下 ,对不同内部支承结构与管束组合的冷凝器进行了传热实验研究 ,得到了水蒸汽在冷凝器壳侧的冷凝传热特性曲线。采用冷凝传热强化因子的概念 ,建立了预测该种折流杆冷凝器壳侧冷凝传热膜系数的计算公式 ,为折流杆冷疑器在制冷系统中的设计应用提供了理论依据。     

Fourier regularization for a backward heat equation

In this paper a simple and convenient new regularization method for solving backward heat equation—Fourier regularization method is given. Meanwhile, some quite sharp error estimates between the approximate solution and exact solution are provided. A numerical example also shows that the method works effectively.     

Chip-calorimeter for small samples

A method for measuring heat capacities of small samples using a chip-calorimeter and a heat pulse technique is described. The theoretical background to calculate the heat transport properties and the heat capacity of the sample from the pulse response function is given. Problems and potentials of the method are discussed. An example is given.     

关于半线性热方程整体解的注记

利用Besov空间的热核刻画及压缩映射原理,研究半线性热方程ut-△u＝u|u|a的初值问题,得到了当初值u0∈Lp0(Rn)且||u0||(B·)p-n (1/p0-1/p),∞(Rn)(p0＝na/2,p＞p0)充分小时,整体解的存在性及在一定条件下解的惟一性.     

Heat transfer in lattice BGK modeled fluid

The thermal lattice BGK model is a recently suggested numerical tool aiming at solving problems of thermohydrodynamics. The quality of the lattice BGK simulation is checked in this paper by calculating temperature profiles in the Couette flow under different Eckert and Mach numbers. A revised lower order model is proposed to improve the accuracy and the higher order model is proved to be advantageous in this respect, especially in the flow regime with a higher Mach number.     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。