碳纳米管制备蓝光石墨烯量子点及其在柔性有机存储器上的应用

通过化学裁剪法打开碳纳米管获得了粒径一致、性能稳定、具有蓝色荧光的石墨烯量子点。该方法属于化学溶液法，具有成本低廉、工艺简单、条件易控等优势。将该样品与半导体聚合物按一定比例混溶，通过旋涂技术形成基于石墨烯量子点掺杂的聚合物复合薄膜，进而制成柔性存储器。该柔性可弯曲存储器具有低驱动电压、接近10³的ON/OFF 比率、较好的循环次数，较好的重复性和稳定性。该研究结果为柔性有机存储器领域的研究展开了新的方向。     

Distinct magnetic properties of one novel type of nanoscale cobalt-iron Prussian blue analogues synthesized in microemulsion

One novel type of nanoscale cobalt-iron Prussian blue analogues (PBA) in the form of mixed nanorods and nanocubes were synthesized using cetyltrimethyl ammonium bromide (CTAB) as the surfactant in microemulsion at low temperature. The generated products were characterized by SQUID, XRD and IR techniques, etc. The effects of potassium contents, cobalt-to-iron ratios, reaction temperatures on the properties of the nanoscale cobalt-iron PBA were systematically explored. The results showed that the novel type of nanomaterials possessed distinct magnetic properties in that their coercivities were intensely dependent on cobalt-to-iron ratios and potassium contents. Furthermore, it was observed that low reaction temperature not only affected the morphologies of the products, but also had influence on their magnetic properties. Additionally, the cobalt-iron Prussian blue analogues were strongly influenced by CTAB around their surface, which led to higher Curie temperatures.     

CYCLIZATION OF ISOMERIC BUTENYL PHENYL SULFIDES ON CHROMIC CATALYSTS

Abstract

It is established that isometric butenyl phenyl sulfides on chromic catalysts yield mainly direct cyclization products unlike their reactions on heterogenous acidic catalysts previously investigated in our laboratory. In the presence of such catalysts the formation of cyclic comcounds proceeds in different ways depending on the position of the side-chain double bond. In case chromic catalysts are used the mentioned factor affects only the easiness of cyclization, but not the nature of the process as such.     

Electrochemical Characterization of Egyptian Blue Pigment in Wall Paintings Using the Voltammetry of Microparticles Methodology

The solid state voltammetric response of Egypt blue, Han blue and ploss blue pigments upon attachment to graphite electrodes in contact with aqueous phosphate buffer at pH 7.0 is studied by voltammetry of microparticles and scanning electrochemical microscopy. Such voltammetric responses, combined with those for synthetic specimens consisting of binary mixtures of the pigment and SiO₂ or CaCO₃ as well as ternary ones of CaCO₃ and SiO₂ mixtures allow for the identification of the pigment and the support in samples from wall paintings using different electrochemical parameters, in particular upon performing the Tafel and modified Tafel analysis of voltammetric peaks. Identification of Egypt blue in microsamples of murals from a Roman archaeological site in Castulo (Jaén, Spain) is discussed.     

Dephosphorylation of intact glycoprotein to greatly improve digestion efficiency coupled with matrix-assisted laser desorption/ionization–Fourier transform ion cyclotron resonance mass spectrometric analysis

Sialylation is essential for a variety of cellular functions. Herein, we used bovine fetuin with three potential N-linked glycosylation sites containing complex-type glycan structures, four potential O-linked glycosylation sites and six potential phosphorylation sites as a model compound to develop a highly-efficient digestion strategy for sialylated glycoproteins and efficient enrichment strategy for sialylated glycopeptides using titanium dioxide. The former according to the process of alkaline phosphatase digestion followed by tryptic digestion and then proteinase K digestion could greatly improve the enzymatic efficiency on fetuin, and the latter could obviously enhance the enrichment efficiency for multisialylated glycopeptides using phosphoric acid solution as elution buffer. The mass spectra of the enriched glycopeptides derived from fetuin reveal that several series of the ion clusters with mass difference of 291 Da correspond to the presence of multisialylated glycopeptides. In addition, the approach was applied to characterize the sialylated status of α2-macroglobulin and transferrin, respectively, from the sera of healthy subjects and sex- and age-matched patients with thyroid cancer, and their spectra indicate that the change in the amount of the glycoforms containing different number of sialic acid (SA) residues from one glycosylation site may be used to differentiate between healthy subjects and cancer cases.     

Novel electrochemical biosensor based on functional composite nanofibers for sensitive detection of p53 tumor suppressor gene

A novel electrochemical biosensor based on functional composite nanofibers for sensitive hybridization detection of p53 tumor suppressor using methylene blue (MB) as an electrochemical indicator is developed. The carboxylated multi-walled carbon nanotubes (MWNTs) doped nylon 6 (PA6) composite nanofibers (MWNTs–PA6) was prepared using electrospinning, which served as the nanosized backbone for pyrrole (Py) electropolymerization. The functional composite nanofibers (MWNTs–PA6–PPy) used as supporting scaffolds for ssDNA immobilization can dramatically increase the amount of DNA attachment and the hybridization sensitivity. The biosensor displayed good sensitivity and specificity. The target wild type p53 sequence (wtp53) can be detected as low as 50 fM and the discrimination is up to 57.5% between the wtp53 and the mutant type p53 sequence (mtp53). It holds promise for the early diagnosis of cancer development and monitoring of patient therapy.     

Electrochemical DNA biosensor for human papillomavirus 16 detection in real samples

An electrochemical DNA biosensor for human papillomavirus (HPV) 16 detection has been developed. For this proposed biosensor, l-cysteine was first electrodeposited on the gold electrode surface to form l-cysteine film (CYSFILM). Subsequently, HPV16-specific probe was immobilized on the electrode surface with CYSFILM. Electrochemistry measurement was studied by differential pulse voltammetry method (DPV). The measurement was based on the reduction signals of methylene blue (MB) before and after hybridization either between probe and synthetic target or extracted DNA from clinical samples. The effect of probe concentration was analyzed and the best results were seen at 1000 nM. The hybridization detection presented high sensitivity and broad linear response to the synthetic-target concentration comprised between 18.75 nM and 250 nM as well as to a detection limit of 18.13 nM. The performance of this biosensor was also investigated by checking probe-modified electrode hybridization with extracted DNA from samples. The results showed that the biosensor was successfully developed and exhibited high sensitivity and satisfactory selectivity to HPV16. These results allow for the possibility of developing a new portable detection system for HPVs and for providing help in making an effective diagnosis in the early stages of infection.     

Synthesis and Photocatalytic Properties of Nano‐crystalline In2O3

A nano‐crystalline In₂O₃ was synthesized using calcinations methods and was used as a photocatalyst to degrade sulfan blue (SB) dye. In addition, this study addresses the conditions of the degradation and the factors that influenced the catalysis. In₂O₃ was prepared by calcining In(OH)₃ at heat ranges of 100–700 °C for 24 h. The In₂O₃ was characterized using field emission scanning electron microscopy (FE‐SEM), an X‐ray diffractometer (XRD), thermogravimetric analysis (TGA), and high‐resolution X‐ray photoelectron spectroscopy (HR‐XPS). The activities of these samples were tested for the photocatalytic degradation of SB dye. The results indicated that the In(OH)₃ that was calcined at 300 °C for 24 h had the best performance.     

Kinetics for the Reaction between Potassium Ferricyanide and Cobalt Chloride in Aqueous Solution and Microemulsion

The kinetics for the reaction between potassium ferricyanide (K₃Fe(CN)₆) and cobalt chloride (CoCl₂) in aqueous solution and water/bis(2-ethylhexyl) sodium sulfosuccianate (AOT)/isooctane microemulsions were studied by three-wavelength spectrophotometry at 298.2 K. The second-order rate constants (k₂) were calculated from the time dependence of the concentration of reactant K₃Fe(CN)₆. The result showed that the reaction rates in water/AOT/isooctane microemulsions were slower than that in the aqueous solution, and k₂ decreased with molar ratio (ω) of water to AOT in microemulsions, which was interpreted by the transition state theory and confirmed that the reaction took place at the interfaces of the microemulsion water pools.     

CdS/石墨烯纳米复合物的可见光催化效率和抗光腐蚀行为

制备了一系列CdS纳米晶/石墨烯(CdS/GR)复合物,并在可见光照条件下评价了其光催化降解亚甲基蓝的光催化效率和抗光腐蚀行为. 研究表明,石墨烯的引入加速了CdS纳米晶(NCs)光生电子的迁移速率,抑制了其光生电子-空穴的复合,有效改善了其光催化降解有机污染物的性能. CdS/GR复合物中的石墨烯含量显著影响其光催化效率,其中石墨烯含量为4.6%的光催化剂效率最高,其光电流是CdS NCs的2.3倍. 利用光电化学和X射线衍射技术进一步证实,石墨烯的引入抑制了CdS NCs光腐蚀的发生,提高了CdS/GR复合物的光催化稳定性.