Bimetallic CuCo composites are prepared by calcinating copper hexacyanocobaltate precursor in N2 atmosphere. The CuCo modified electrodes are fabricated for nonenzymatic glucose sensing in the alkaline electrolyte. The glucose can be directly electro-oxidized on the surface of the electrode catalyst mediated by the redox couples of Cu and Co. The optimal glucose sensor exhibits a high sensitivity (567 μA ⋅ mM−1 ⋅ cm−2) in the range up to 825 μM with a detection limit of 3 μM and acceptable selectivity. The sensor can also be applied in serum samples. This work provides a facile and easily-scalable synthesis method of electrocatalysts for nonenzymatic glucose sensors. 相似文献
Prussian blue nanoparticles (PBNPs) have peroxidase-like activity for H2O2. However, PB alone have poor electrochemical performances. Herein, a strategy was proposed by direct in-situ growth PBNPs onto gold nanowires (AuNWs) surface to obtain the peroxidase-like activity with about 4.05 times higher than that of PBNPs alone. PBNPs@AuNWs was employed to construct a non - enzymatic electrochemical H2O2 sensor with the detection limit of 5.3×10−9 mol/L (S/N=3). The sensor was successfully used to detect H2O2 in human serum samples or secreted from living HeLa cells. It may be a competitive candidate for H2O2 assaying in biological samples or cellular investigation. 相似文献
A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition 相似文献
We reported the characteristics of p‐type tin‐oxide (SnO) thin film transistors (TFTs) upon illumination with visible light. Our p‐type TFT device using the SnO film as the active channel layer exhibits high sensitivity toward the blue‐light with a high light/dark read current ratio (Ilight/Idark) of 8.2 × 103 at a very low driven voltage of <3 V. Since sensing of blue‐light radiation is very critical to our eyes, the proposed p‐type SnO TFTs with high sensitivity toward the blue‐light show great potential for future blue‐light detection applications.
In the race towards miniaturization in nanoelectronics, magnetic nanoparticles (MNPs) have emerged as potential candidates for their integration in ultrahigh‐density recording media. Molecular‐based materials open the possibility to design new tailor‐made MNPs with variable composition and sizes, which benefit from the intrinsic properties of these materials. Before their implementation in real devices is reached, a precise organization on surfaces and a reliable characterization and manipulation of their individual magnetic behavior are required. In this paper, it is demonstrated how molecular‐based MNPs are accurately organized on surfaces and how the magnetic properties of the individual MNPs are detected and tuned by means of low‐temperature magnetic force microscopy (LT‐MFM) with variable magnetic field. The magnetization reversal on isolated and organized MNPs is investigated; in addition, the temperature dependence of their magnetic response is evaluated. 相似文献
This work presents the fabrication of large-scale tunable-plasmonic surface-enhanced Raman scattering (SERS) templates and investigates their Raman enhancement. Substrates for SERS were prepared by deposition of gold nanoparticles on a glass slide followed by their growth. A plasmon shift was observed upon growing due to the formation of elongated nanoparticles and their mutual coupling. The changes in particle size, shape and interparticle distances were indicated by SEM measurements. Surface-enhanced Raman spectra of Nile blue A at a very low concentration on top of a blocking layer were measured. The overall Raman enhancement is correlated with the number of growth steps. For excitation at 532 nm four growth steps lead to maximum enhancement. Better overlap of excitation laser and the plasmon resonances upon growing increased the enhancement until four steps while further growing decreased the enhancement. At longer wavelengths excitation (633 and 785 nm) the enhancement further increased beyond the fourth growth step. This enhancement is caused by the plasmon excitation of narrower gap sizes. The proposed procedure for the SERS substrates is simple, allows covering large surface areas and plasmon band tuning from 530 nm to the near infrared in order to increase overall Raman enhancement. 相似文献
In present study adsorption capacity of waste materials of Daucus carota plant (carrot stem powder: CSP and carrot leaves powder: CLP) was explored for the removal of methylene blue (MB) malachite green (MG) dye from water. The morphology and functional groups present were investigated by scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. The operating variables studied were pH, adsorbent dose, ionic strength, initial dye concentration, contact time and temperature. Equilibrium data were analysed using Langmuir and Freundlich isotherm models and monolayer adsorption capacity of adsorbents were calculated. Kinetic data were studied using pseudo-first and pseudo-second order kinetic models and the mechanism of adsorption was described by intraparticle diffusion model.Various thermodynamic parameters such as enthalpy of adsorption ΔH°, free energy change ΔG° and entropy ΔS° were estimated. Negative value of ΔH° and negative values of ΔG° showed that the adsorption process was exothermic and spontaneous. Negative value of entropy ΔS° showed the decreased randomness at the solid–liquid interface during the adsorption of MB and MG onto CSP and CLP. 相似文献
Applications of a hybrid material consisting of polyacrylamide (PAA) and Xylidyl Blue (XB) for the removal of uranyl ions from aqueous solutions has been investigated with all details. Adsorption experiments were performed at batch mode and constant temperature. Experimental parameters affecting adsorption process such as pH, initial uranyl concentration, time and temperature were studied on the removal of the uranyl ions. The isotherms assays were carried out with synthetic solutions and adsorption data were evaluated by using Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models. Morphological and chemical characterizations of new synthesized material were investigated by UV-VIS-NIR spectroscopy and SEM/EDX techniques and pHpzc experiments. The results of the kinetic experiments are consistent with pseudo-second-order models and intra-particle diffusion models with a slightly better fit to the latter. Equilibrium was achieved within 3 h. The value of rate constant for adsorption process was calculated as 1.055 mol−1 kg min−1 at 318 K. The calculated thermodynamic parameters (ΔG°, ΔH° and ΔS°) indicated that the adsorption of uranyl ions onto XB@PAA was feasible, spontaneous and endothermic nature under the studied temperature. The developed material has also a potential as a sensor because its color turn from pink to red by adsorption of uranyl ions. 相似文献
Nowadays, blue fluorescent organic light-emitting diodes (FOLEDs) have attracted considerable attention from both academia and industry. According to spin statistics, electrical excitation results in the formation of ∼25% singlet excitons and ∼75% triplet excitons (signifying ~75% energy loss), which triggered wide-ranging efforts to harvest as many triplet excitons as possible. The materials that can convert triplet excitons into singlet excitons from the high-lying excited triplet states (referred as “hot exciton” channel) to realize high efficiency were reported, which can also efficaciously avoid the accumulation of triplet excitons in T1 state. In this study, by means of density functional theory (DFT) and time-dependent DFT, we have theoretically investigated the electronic and photophysical properties of 16 newly designed molecules with donor-bridge-acceptor framework to search for the blue FOLED materials exploiting the “hot exciton” path. Important properties, such as singlet-triplet energy gaps, absorption and emission parameters, and reverse intersystem crossing rates (kRISC), of five target molecules were studied. The calculated results demonstrate that thiophene-diphenylamine (kRISC up to 1.03 × 108 seconds−1) may have promising potential as blue FOLED materials by virtue of the “hot exciton” effect. 相似文献