大口径离轴凸非球面的加工和检测

将光学系统波像差检验技术与子孔径拼接测试技术相融合提出了凸非球面系统拼接检测方法,对该方法的原理和实现步骤进行了分析和研究,并建立了合理的子孔径拼接数学模型.依次利用计算机控制光学表面成形技术和磁流变抛光技术对一包含大口径凸非球面的离轴三反光学系统的各反射镜进行加工,并对整个系统进行装调和测试.测定光学系统各视场的波像差分布,通过综合优化子孔径拼接算法和全口径面形数据插值求解得到大口径凸非球面全口径的面形信息.结合工程实例,对一口径为292mm×183 mm的离轴非球面次镜进行了系统拼接测试和加工,其最终面形分布的均方根值为0.017λ(λ=632.8 nm).     

光谱成像技术无损鉴别西洋参饮片的研究

应用电可控液晶光谱成像装置,测定不同市售来源的西洋参饮片,以期为其质量控制提供新的方法。系统光谱分辨率5nm,光谱覆盖范围为405～680nm,空间分辨率50lp·mm-1。从成像光谱立方体中提取特征光谱曲线,构建饮片指纹图谱;采用主成分等聚类分析方法解析其指纹图谱,用于饮片真伪鉴别与质量判定。结果与性状,显微及理化鉴定结果相吻合。表明光谱成像分析技术可用于中药指纹图谱的构建和质量评价,操作方法简便、快速、无损。     

双硬度靶对球形弹丸的防护性能

以钢/铝双硬度爆炸焊接复合靶为研究对象,采用系列弹道实验和数值模拟方法,研究了其在球形弹丸垂直侵彻作用下的抗侵彻性能。侵彻实验利用直径为14.5mm的滑膛枪发射直径为6mm的钢质球形弹丸;采用LS-DYNA3D非线性有限元程序和有限元-光滑粒子流体动力学(FE-SPH)耦合法,进行数值模拟。基于实验和数值模拟结果,分析了不同靶板的毁伤机理和破坏模式,以及靶板厚度、强度等因素对复合靶抗侵彻性能的影响。结果表明:在球形弹丸的垂直侵彻作用下,钢面板发生剪切冲塞破坏,铝背板发生延性扩孔破坏;对于双层靶而言,钢面板与铝背板的厚度比约为2/3时,复合靶的抗侵彻性能最差;数值计算结果与实验结果吻合良好,表明FE-SPH耦合算法可较好地预测双层复合靶板的抗侵彻性能。     

探测超声微振动的激光外差干涉仪

激光超声是一项新兴的技术，可应用于非接触检测。本文作者研制的探测超声微振动的激光外差干涉仪，该装置具有结构简单，不必采用复杂的反馈回路，只要采用简单的滤波就可以消除外界环境引起的干扰，更重要的是它的测量结果与干涉仪的初相无关，为实际应用提供了很大方便。     

变厚度多边形蜂窝结构的超声C扫描检测方法

为了解决变厚度多边形蜂窝结构超声波检测难和检测效率低的问题,采用了灵敏度补偿和多边形扫查路径规划相结合的超声C扫描方法进行检测。在扫查检测过程中,一是根据构件厚度变化进行灵敏度补偿,消除因厚度变化而引起的超声信号衰减对检测结果的影响;二是根据构件几何形状对此类构件进行多边形扫查路径规划,减少探头的空扫描范围,提高检测效率。试验结果表明:该检测方法能准确、高效地检出变厚度多边形蜂窝结构中的缺陷。     

焊缝超声相控阵检测数据深度学习降噪方法

超声相控阵检测技术在焊缝检测中具有广泛的应用.超声相控阵检测技术检测信号中常混入噪声导致检测成像时难以分辨真实的缺陷特征.这些噪声主要为无关的反射信号和局部相关的结构噪声,传统的超声图像降噪方法难以有效滤除这些噪声,且存在计算效率低、参数优化复杂等问题.该文提出了一种基于深度学习的焊缝超声相控阵检测技术检测S扫图像的降...     

Novel correction method for X-ray beam energy fluctuation of high energy DR system with a linear detector

A high energy digital radiography (DR) testing system has generated diverse scientific and technological interest in the field of industrial non-destructive testing. However, due to the limitations of manufacturing technology for accelerators, an energy fluctuation of the X-ray beam exists and leads to bright and dark streak artifacts in the DR image. Here we report the utilization of a new software-based method to correct the fluctuation artifacts. The correction method is performed using a high pass filtering operation to extract the high frequency information that reflects the X-ray beam energy fluctuation, and then subtracting it from the original image. Our experimental results show that this method is able to rule out the artifacts effectively and is readily implemented on a practical scanning system.     

Density measurement for polymers by magneto-Archimedes levitation: Simulation and experiments

In a magneto-Archimedes levitation device, a polymer can be levitated in a paramagnetic medium, and its equilibrium levitated height is mainly related to its density. Here, a novel density measurement method for polymers via magneto-Archimedes levitation is proposed, in which the relationship between the density and the levitated height is determined through numerical simulation. COMSOL software is employed to simulate the distribution of magnetic field in the device, and FLUENT-EDEM multiphase software is adopted to predict the polymer's levitated height. A 3rd-order polynomial equation is fitted by simulation results for density calculation. Several experiments with different devices, different magnets, different mediums, and various polymers were carried out to verify the proposed method. Experimental results showed that the proposed method has high accuracy (0.0060–0.0130 g/cm³) in density measurements for small polymer samples (∼25 mm³). In general, the proposed method has prospects of broad application in polymer density-based testing.     

Optical testing of star sensor (II): Alignment of star sensor from off-line pictures taken in orbital test

Alignment error of an image sensor relative to the optical axis of a star sensor head and alignment errors between four heads were calculated from pictures taken in an orbital experiment. When comparing the image sensor alignment parameters in the orbital test and a ground test, both values matched well. By determining the relative relationship of the four heads using four pictures taken at the same moment in orbit and uploading the parameters to the star sensor system in orbit, the estimated attitude error was improved from 0.29 to 0.17°, though the accuracy was limited by the ±0.2° determination accuracy of the satellite itself. We estimated the attitude determination accuracy from separation angles between boresights of the four heads, calculated from pattern matching between downloaded pictures and a star catalogue. The estimated accuracy, in terms of potential optical performance, was 0.60 arcmin at 3σ, which is sufficient to satisfy the specification of 1 arcmin.     

Nonlinear optical characterization of cluster dynamic in water in oil microemulsion by a pump probe laser beam technique

We present a new pump probe laser beams configuration for the nonlinear optical characterization of microemulsions. We detect the variation of the on-axis optical intensity of the probe beam as generated by the concentration profile induced in an optically thin film of microemulsion by the pump beam. A mathematical model has been introduced to describe the phenomenon. The technique allows the determination of both Kerr-like optical nonlinearity and time constants and, therefore, it gives information both on cluster dimension and their shape. We discuss its application to WAD (water/AOT/decane, where AOT denotes sodium-bis-di-ethyl-sulfosuccinate) with the application of a strong electric field of optical source. Comparison between theoretical predictions and experimental results confirms the presence of giant optical nonlinearity in the absence of turbidity divergence. Chainlike shape of clusters, of the kind already reported with the application of strong electric field, could justify this result. Received 26 October 2002 RID="a" ID="a"e-mail: vicari@na.infn.it