染料敏化太阳能电池中大孔TiO2薄膜电极的制备及应用

采用溶胶-凝胶水热法制备了TiO₂纳晶薄膜电极，晶型为锐钛矿型。为了提高电极的光电性能，利用聚苯乙烯小球做造孔剂，制备了含有大孔隙的TiO₂纳晶薄膜电极，孔径约为200 nm，该电极具有较好的光漫反射性能，更重要的是球形大孔的存在，提高了凝胶电解质在TiO₂薄膜电极中的渗透和I₃^-离子的扩散性能，与不含大孔的TiO₂电极相比，电池的短路光电流提高约2 mA·cm^-2，光电转换效率提高0.6%。     

不同软段结构聚氨酯-酰亚胺嵌段共聚物的合成及热性能研究

用二步法合成了不同软段 (PPO ,PEG ,PEPA)聚氨酯 酰亚胺 (PUI)嵌段共聚物 ,FTIR光谱表征了所有合成PUI分子主链均含有酰亚胺链段 ,并研究了PUI嵌段共聚物的热性能受软段类型及长度的影响 .DSC研究表明聚酯型PUI的软硬段之间的相容性比聚醚型PUI好 ,随相同软段分子量的增加 ,PUI体系的软硬段兼容性变差 ,并显示了相分离的特征 ;热失重 (TGA)研究得出不同软段的PUI样品的热稳定性大小顺序为 :PEPA PUI >PEG PUI>PPO PUI ;动态力学 (DMTA)研究给出了所合成的PUI样品在 5 0～ 2 0 0℃范围内均出现了较长的模量平台显示出有较好的耐热性 ,且随硬段含量的升高其储能模量不断增强     

A Watersoluble Sulfonatomethylated Calix[4]resorcinarene as Artificial Receptor of Metal Complexes

The binding of different sized and shaped metal complexes [Co(His)₂]ClO₄(1), [Co(en)₂C₂O₄]Cl (2) and [K18-crown-6]SCN (3)(en-ethylendiamine, His-L-histidynate-anion) with a new tetrasulfonatomethylcalix[4]resorcinarene([H₈X]Na4) was investigated in neutral and alkaline aqueous media by NMR and pH-metrictitration methods and compared with those of recently studied NMe₄Br (4). The resultsobtained indicate that the outer-sphere coordination of complexes 1–3 by[H₈X]^4- proceeds via the interaction of hydrophobic fragments of the guestswith both the negatively charged rim and the hydrophobic cavity as a -base. Thenature of binding does not change for cations 1, 2 and 4 on going from[H₈X]^4- in neutral to [H₄X]^8- in alkaline media, while the inclusionof 3 decreases on going from [H₈X]^4- to [H₄X]^8-.     

Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

pH-sensitive modulation of the second hydration sphere in lanthanide(III) tetraamide-DOTA complexes: a novel approach to smart MR contrast media

The lanthanide(III) complexes of three tetraamide DOTA bearing pyridyl, phenolic and hydroxypyridyl substituents have been studied by NMR, luminescence and cyclic voltammetry. The relaxivity profiles of the gadolinium complexes of the pyridyl and phenolic ligands were flat and essentially the same between pH 2 and 8. The hydroxypyridyl ligand, however, exhibited two regions of enhanced relaxivity. The small relaxivity enhancement (25 %) at lower pH (pH 2-4) has been attributed to an increase in the prototropic exchange of the coordinated water molecule while the slightly larger enhancement (84 %) at higher pH (pH 6-9) reflects deprotonation of the ligand amide protons. Deprotonation of the amides results in the formation of an intramolecular acid-base pair interaction with the phenolic protons and this, in turn, causes a highly organized second hydration sphere to come into effect, thereby increasing the relaxivity. The water relaxivity of the Gd(3+)-hydroxypyridyl complex is further enhanced upon binding to serum albumin.     

Inverse relaxation-model and relation to recovery internal friction

Inverse relaxation is studied for hard elastic polypropylene (HEPP), rubber and non-elastic polypropylene. The results show that contractive stress, stress, and internal friction are three essential factors related to the phenomenon. A three-element model in which each element has a definite meaning is proposed to describe this phenomenon. The results also show that, in the first cyclic deformation, relaxation time increases with the increase of recovery for all the materials, which indicates that recovery viscosity increases with the increase of recovery, but the stress rising amplitude (SRA) of inverse relaxation has a maximum in the recovery range. Analysis indicates that SRA equals recovery internal friction (RIF) for ideal material in which stress is solely a function of strain, independent of paths, and approximately equals RIF for non-ideal material at a given strain. From this principle it is found that the order of the work counteracted by RIF for the four materials is the same as that of their second hysteresis loop, and the RIF of HEPP has a sudden increase at the later recovery range.     

超临界流体技术在制备药物输送系统中的应用

超临界流体技术以其特有的优点成为引人注目的制备药物细微粒子及控制释放的药物输送系统的方法。本文介绍了超临界流体沉淀技术的概念、进展及相关的应用。     

锂离子选择性微电极在生物体液中的响应

最近几年已报道了几种锂离子选择性电极.本文作者曾研制了以苯基膦酸二辛酯(DOPP)为溶剂,四苯硼酸盐为活性物质的PVC膜锂离子选择电极.本文在此基础上研制了锂离子选择性微电极,比较了以四苯硼酸钾(KTPB)及四苯硼酸钠(NaTPB)为活性物质的锂微电极的性能.同时考察了微电极在细胞内液、血清及生理盐液中对锂离子的响应特性.     

Flow-injection chemiluminescent determination of metoclopramide hydrochloride in pharmaceutical formulations and biological fluids using the [Ru(dipy)(3)(2+)]-permanganate system

A flow-injection (FI) methodology using (2,2′-dipyridyl) ruthenium(II) [Ru(dipy)₃²⁺] chemiluminescence (CL) was developed for the rapid and sensitive determination of metoclopramide hydrochloride. The method is based on the CL reaction of metoclopramide with Ru(dipy)₃²⁺ and KMnO₄ in a sulfuric acid medium. Under the optimum conditions, a calibration graph was obtained over the concentration range 0.005-3.5 μg ml⁻¹ with a limit of detection (S/N=2) of 1 ng ml⁻¹. The correlation coefficient was 0.99993 (n=8) with a relative standard deviation of 0.48% for 10 determinations of 1 μg ml⁻¹ of drug. The method was successfully applied to the determination of metoclopramide in pharmaceutical preparations and biological fluids after IP administration of 25 mg kg⁻¹ dose to rats. The elimination half-life was 2.5±0.4 h.     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002