Allylic Alcohols as Substrate for Ruthenium‐Catalyzed C?C Coupling Allylation Reactions. Preliminary Communication

Allylic alcohols, rather than halides, acetates, or carbonates can be used directly in the Friedel–Crafts‐type coupling with various phenols. The use of a Ru^IV, rather than a Ru^II, precursor promotes the formation of one H⁺ per cycle so that a large excess of acid is never present in the reaction mixture. Consequently, the leaving group in the oxidative addition reaction is H₂O, thereby avoiding the production of an unnecessary by‐product.     

Photoluminescence of ZnO films prepared by r.f. sputtering on different substrates

Polycrystalline ZnO films with good orientation were deposited on sapphire, quartz, Si and 7059 glass substrates by r.f. magnetron sputtering. A strong UV photoluminescence (PL) peak (located at 356 nm) and a weak blue emission peak (located at 446 nm) were observed at room temperature (RT) for the films deposited on sapphire, quartz and Si substrates when excited with 270 nm light. For the films prepared on Corning 7059 glass, only a strong 446 nm blue emission peak was found, and the PL intensity decreased with increasing oxygen pressure during films deposition. The intensity of the UV emission increased 7 and 14 times, respectively, for the films on sapphire and quartz substrates after high temperature annealing in vacuum. The UV emission originates from the inter-band transition of electrons and the blue emission is due to transition of electrons from the shallow donor level of the oxygen vacancies to the valence band.     

Cetyltrimethylammonium Bromochromate: A New and Efficient Oxidant for Organic Substrates

Cetyltrimethylammonium bromochromate is a versatile reagent for the effective and selective oxidation of organic substrates, particularly for alcohols, under mild conditions.     

Development of n-type Te-doped GaSb substrates with low carrier concentration for FPA applications

Undoped GaSb is p-type with the residual acceptor concentration of about 1e17 cm⁻³ due to the gallium vacancies and gallium in antimony site. Counter-doping of GaSb with low level of Te can reduce the net carrier concentration resulting in higher optical transparency in a broad IR spectral range. In this work, the carrier concentration, mobility and sheet resistance of n-type and p-type Te-doped GaSb substrates were measured using Hall method at 300 K and 77 K. The Hall carrier concentration data at 300 K were correlated with the absorption coefficients of GaSb in the IR spectral range. An empirical relationship between these values was established. Based on this correlation, we discuss application of FTIR spectroscopy for non-destructive optical screening of the substrates that allows construction of the carrier concentration distribution map across GaSb wafers. Investigations of the electronic properties of the low-doped p-type and n-type GaSb substrates upon cooling down to 77 K indicate the reduction of the hole carrier concentration background for both GaSb types. This is evident from the decrease in the Hall-measured carrier concentration for p-type GaSb. For n-type GaSb, an increase in the carrier concentration is observed due to the reduction of the hole carrier concentration background.     

Shallow hydroxyapatite coatings pulsed laser deposited onto Al2O3 substrates with controlled porosity: correlation of morphological characteristics with in vitro testing results

We studied the influence of porous Al₂O₃ substrates on Ce-stabilized ZrO₂-doped hydroxyapatite thin films morphology pulsed laser deposited on their top. The porosities of substrates were monitored by changing sintering temperatures and measured with a high pressure Hg porosimeter.The depositions were conducted in 50 Pa water vapors by multipulse ablation of the targets with an UV KrF* (λ = 248 nm, τ ∼ 25 ns) excimer laser. The surface morphology of synthesized nanostructures was investigated by scanning electron microscopy and atomic force microcopy. Ca/P ratio within the range 1.67-1.70 was found for hydroxyapatite coatings by energy dispersive spectroscopy.The films were further seeded with mesenchymal stem cells for in vitro tests. The cells showed good attachment and spreading uniformly covering the entire surface of samples. The complexity of film morphology which is increasing with substrate porosity was shown to have a positive influence on cultivated cells density.     

Photoluminescence and secondary ion mass spectroscopy characterization of GaAs-AlGaAs quantum wells grown on GaAs (1 0 0) substrates with different surface treatments

GaAs (1 0 0) substrates prepared in a quartz chamber under a H₂/As₄ flux, and then exposed to air were used for the subsequent growth of GaAs-AlGaAs single quantum wells by molecular beam epitaxy. The substrates prepared by this method showed atomically flat surfaces corroborated by atomic force microscopy analysis. Quantum wells grown directly on these substrates without a GaAs buffer layer exhibited narrow and intense photoluminescence peaks, an indication of a high quality material. The secondary ion mass spectroscopy analysis showed oxygen and carbon traces on the first AlGaAs barrier layer grown after air exposure with no effects on the quantum wells optical emissions. From the results we conclude that the prepared GaAs surfaces are useful for the epitaxial growth of high quality quantum structures.     

Preparation of ZnMgO:Ga thin films on flexible substrates by pulsed laser deposition

Transparent conducting ZnMgO:Ga films were deposited on flexible PET substrates by pulsed laser deposition (PLD). Effects of deposition pressure and time on the structural, electrical and optical properties of ZnMgO:Ga films were investigated. The films showed a low resistivity about 7.68 × 10⁻⁴ Ω cm when deposited at the pressure of 0.03 Pa for 40 min. All the films exhibited a high transmittance over 80% in the visible and near-ultraviolet region. The band gap of as-grown films was about 3.50 eV.     

Measurement of the absolute Raman scattering cross section of the 1584‐cm−1 band of benzenethiol and the surface‐enhanced Raman scattering cross section enhancement factor for femtosecond laser‐nanostructured substrates

The absolute Raman scattering cross section (σ_RS) for the 1584‐cm⁻¹ band of benzenethiol at 897 nm (1.383 eV) has been measured to be 8.9 ± 1.8 × 10⁻³⁰ cm² using a 785‐nm pump laser. A temperature‐controlled, small‐cavity blackbody source was used to calibrate the signal output of the Raman spectrometer. We also measured the absolute surface‐enhanced Raman scattering cross section (σ_SERS) of benzenethiol adsorbed onto a silver‐coated, femtosecond laser‐nanostructured substrate. Using the measured values of 8.9 ± 1.8 × 10⁻³⁰ and 6.6 ± 1.3 × 10⁻²⁴ cm² for σ_RS and σ_SERS respectively, we calculate an average cross‐section enhancement factor (EF) of 0.8 ± 0.3 × 10⁶. Copyright © 2009 John Wiley & Sons, Ltd.     

真空紫外到深紫外波段基底材料的光学特性

 研究了真空紫外到深紫外波段常用的基底材料,给出了常用基底材料的光学特性和在真空紫外波段的截止波长,测量了这些材料在120~500 nm的透过率,给出了通过透过率计算弱吸收基底光学常数的计算方法,并用该方法得到了熔石英、氟化镁晶体、氟化钙晶体、氟化锂晶体在120~500 nm的折射率和消光系数,对这些常用基底的使用范围和特点进行了一定的比较和分析,并将所得基底的光学常数与公开发表的文献进行了比较,证明了所得结果的可靠性。     

A diastereoselective tandem RCM approach to spiropiperidines

This paper outlines the stereocontrolled synthesis of a functionalised spiropiperidine through a diastereoselective tandem RCM reaction. The diastereoselectivity of this process was found to be strongly dependant on the nature of the catalyst; the less active first generation Ru-carbene complexes provided the desired spirocycle in high yield and with good stereocontrol. Additionally, the further functionalisation of the spiropiperidine was carried out through a regio- and stereoselective dihydroxylation reaction employing Donohoe's OsO₄-TMEDA conditions.