Directly‐coupled‐column ultra‐fast liquid chromatography with diode array detection method for the rapid quantification of allergenic disperse dyes in water preconcentrated by magnetic solid‐phase extraction

A directly‐coupled‐column ultra‐fast liquid chromatography coupled with diode array detection method for the determination of 12 allergenic disperse dyes in river water at sub‐ppb levels has been developed and successfully validated. The analytical method is based on the use of two different reversed‐phased columns connected through a two‐position switching valve. A baseline separation was achieved by proper selection of stationary phases, mobile phases, and the use of a gradient elution in both dimensions. Furthermore, an easy‐to‐handle magnetic solid‐phase extraction procedure was developed for the preconcentration of 12 allergenic disperse dyes from river water. An enrichment factor of 100 times was obtained. The results showed excellent performance in terms of trueness (76.8–99.0%), precision (intraday: 2.2–8.0%, interday: 3.3–8.2%), and sensitivity (limits of determination, 0.027–1.46 μg/L). Twenty real samples collected from the outfalls in the Yaojiang, Yongjiang and Fenghuajiang estuary were analyzed, and three of the studied compounds were found in one collected sample (12.6 μg/L for disperse blue 7, 11.6 μg/L for disperse blue 106, and 0.22 μg/L for disperse blue 3).     

Complexation and Fluorescence of Tricyclic Basic Dyes Encapsulated in Cucurbiturils

Tricyclic basic dyes (proflavine, acridine orange, pyronine, pyronine Y, oxonine, thionine and methylene blue) often form one‐to‐one or two‐to‐one complexes with CB[7] and CB[8], respectively. In the case of pyronine Y, the complexes with CB[7] and CB[8] have a one‐to‐one and three‐to‐one stoichiometry, respectively. The binding constants for CB[7] complexes range from 3.07×10⁶ to 1.70×10⁷ m ^?1. In the case of CB[8], the association constant varies between 3.24×10¹³ and 2.50×10¹⁶ m ^?2. Overall, these binding constants are four orders of magnitude higher than those reported for the same dyes in β and γ‐cyclodextrins. Formation of the host–guest complexes leads to an increase in the fluorescence quantum yields in the case of CB[7], while the dimeric or trimeric dye encapsulated in CB[8] are remarkably less fluorescent than the same dye in diluted solutions.     

Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

Preparation of highly selective solid-phase extractants for Cibacron reactive dyes using molecularly imprinted polymers

Selective polymeric extractants were prepared for preconcentration of Cibacron reactive red dye, a dye that is often applied with Cibacron reactive blue and Cibacron reactive yellow for dyeing of fabrics. The best extractant was fabricated (in chloroform) using methacrylic acid (as monomer), ethylene glycol dimethacrylate (as crosslinker), AIBN (as initiator for polymerization), and red dye as template molecule, with a molar stoichiometric ratio of 8.0:40.0:2.5:0.63, respectively. The structure of the molecularly imprinted polymer (MIP) was robust, and resisted dissolution up to 260 °C. Compared with the un-imprinted polymer, the imprinted product has a large specific surface area which improved its adsorption capacity. The effect of imprinting was obvious from the adsorption capacity measured at pH 4 for red dye (the imprinted molecule), which was increased from 24.0 to 79.3 mg g⁻¹ after imprinting. Equilibrium adsorption studies revealed that the dye-imprinted-polymer enables efficient extraction of red dye even in the presence of blue and yellow dyes which have similar chemical natures to the red dye. The selectivity coefficients S _{red dye/dye}, were 13.9 and 17.1 relative to the yellow and blue dyes, respectively. The MIP was found to be effective for red dye preconcentration, with a preconcentration factor of 100, from tap water and treated textile wastewater. The factors affecting extraction of red dye by the MIP were studied and optimized. Under the optimized extraction conditions, red dye was selectively quantified in the presence of other competing dyes at a concentration of 20 μg L⁻¹ from different water systems with satisfactory recoveries (91–95%) and RSD values (∼5.0%).     

Structure of 4-[4-(Dimethylamino)-Phenylazo] Benzeneboronic Acid and Its Cyclic Esters with D-Glucose: A Computational Study

We present results from a computational study of 4-[4-(dimethylamino)-phenylazo] benzene boronic acid (DABBA) (the 4'-boronic acid isomer of the aminoazobenzene dye N,N-dimethylaminoazobenzene) and its associated anion, as well as, several cyclic esters formed from these azoborates and various conformers of D-glucose. Azo dyes that also contain one or more boronic acid functional groups are of practical importance in the development of chemical sensors for saccharide recognition because of their ability to induce a visible color change upon binding. The lowest-energy DABBA:D-glucose esters found in this investigation consistently involved at least one of the exocyclic hydroxymethyl groups on the D-glucose moiety rather than vicinal cis or trans diol arrangements of hydroxyl groups on the ring.     

Convenient synthesis of water-soluble nitrilotriacetic acid (NTA) BODIPY dyes

Mono- and bis-NTA-BODIPY dyes have been efficiently synthesized by amide bond formation between hepta-alkylated meso-aryl-BODIPY derivatives and the free amine of mono- and bis-NTA binder surrogates. These new fluorescent hybrids exhibited valuable photophysical properties under buffered aqueous conditions, thus expanding the arsenal of water-soluble BODIPY dyes for potential labeling and monitoring of biological systems and processes.     

幼儿反复呼吸道感染与头发中微量元素含量关系研究

报道了2886名正常儿童与718例反复呼吸道感染儿童头发中微量元素含量对比研究结果。研究表明,患儿的身高、体重和发Zn明显低于正常儿童,而发Cu、Ca、Pb则明显高于正常和童。因子提取分析显示,Zn和Pb在儿童反复呼吸道感染发病中起非常重要的作用。患反复呼吸道感染儿童约占儿童总数的20％左右。     

Physical,Thermal and Biological Properties of Yellow Dyes with Two Azodiphenylether Groups of Anthracene

Two yellow bis-azo dyes containing anthracene and two azodiphenylether groups (BPA and BTA) were prepared, and an extensive investigation of their physical, thermal and biological properties was carried out. The chemical structure was confirmed by the FTIR spectra, while from the UV–Vis spectra, the quantum efficiency of the laser fluorescence at the 476.5 nm was determined to be 0.33 (BPA) and 0.50 (BTA). The possible transitions between the energy levels of the electrons of the chemical elements were established, identifying the energies and the electronic configurations of the levels of transition. Both crystals are anisotropic, the optical phenomenon of double refraction of polarized light (birefringence) taking place. Images of maximum illumination and extinction were recorded when the crystals of the bis-azo compounds rotated by 90° each, which confirms their birefringence. A morphologic study of the thin films deposited onto glass surfaces was performed, proving the good adhesion of both dyes. By thermal analysis and calorimetry, the melting temperatures were determined (~224–225 °C for both of them), as well as their decomposition pathways and thermal effects (enthalpy variations during undergoing processes); thus, good thermal stability was exhibited. The interaction of the two compounds with collagen in the suede was studied, as well as their antioxidant activity, advocating for good chemical stability and potential to be safely used as coloring agents in the food industry.     

Improved STR typing of telogen hair root and hair shaft DNA

Today the STR typing of telogen hair and hair shafts is regarded as a challenge. The small DNA quantity in the hair is highly degraded. Another problem are PCR inhibitors in the hair. In particular hair pigments, the melanins, are known to inhibit PCR. Hairs are exposed to sunlight and partly to chemical oxidation processes, which make them even more difficult to analyze. To increase the chances of a correct typing of hair, the small amount of DNA must be successfully isolated and the inhibitors have to be removed or neutralized. Furthermore, miniSTR typing improves the analysis of stains with degraded DNA like it is the case with hair. We introduce a nonorganic extraction method and in addition a miniSTR concept which is promising in typing stains with little and degraded DNA, especially hairs. The miniSTR concept including five database STRs (SE33, VWA, TH01, FGA, D3S1358) and the gender typing system Amelogenin was optimized for the amplification of hair DNA. Compared to commercial STR kits, this approach resulted in considerably higher success rates.