K4[Fe(CN)6]作为氰源在氰基化反应中的应用

过渡金属催化氰基化反应成为合成芳基腈化物的重要手段之一。2004年,无毒、廉价的K4[Fe(CN)6]首次被用来代替传统的KCN、NaCN及CuCN等作为氰源用于芳基卤代物的氰基化反应。K4[Fe(CN)6]作为氰源时无需复杂的预处理,其6个氰根均可参与反应。该反应为氰基化反应开创了一个新的研究方向,迅速得到了众多研究者的青睐。K4[Fe(CN)6]用于氰基化反应的研究也得到了较快的发展。本文主要综述了近年来K4[Fe(CN)6]作为氰源用于卤代芳烃和芳基氟代磺酸酯的氰基化反应。主要介绍了在钯催化剂和铜催化剂作用下,以K4[Fe(CN)6]为氰源的氰基化反应在配体、反应介质和底物适用范围等方面的研究成果。     

K/CeO2催化剂上碳黑催化燃烧性能及稳定性（英文）

采用不同的钾盐前体制备了一系列K/CeO2催化剂,利用热重和程序升温氧化(TPO)等技术考察了其催化性能及稳定性.结果表明,K/CeO2催化剂可使碳黑完全燃烧温度降低近200oC.钾盐前体对催化活性和稳定性具有较大影响,由于硝酸钾熔点低,金属在载体上的流动性强,有利于催化剂与碳黑的有效接触,因而表现了较高的活性,三次TPO循环试验中催化活性稳定.碳酸钾的熔点高且碱性较强,使碳黑燃烧生成的CO2不可逆吸附在其表面,导致反应活性低,TPO循环实验表明其反应速率降低,失活明显.     

Crystal structures and magnetic properties of three cobalt(II)–organic frameworks with nanoscale channels

Three cobalt(II) coordination polymers, {[Co(nip)(4,4′-bpy)] · 3H₂O} _n (1), [Co(nip)(bpe)] _n (2), and [Co(nip)(bpp)(H₂O)] _n (3), were hydrothermally synthesized by the reaction of cobalt nitrate hexahydrate and nip with 4,4′-bpy, bpe, and bpp [nip = 5-nitro-1,3-benzenedicarboxylato, 4,4′-bpy = 4,4′-bipyridine, bpe = 1,2-bis(4-pyridyl)ethane, bpp = 1,3-bis(4-pyridyl)propane], respectively. Co(II) displays different coordination in the three complexes, resulting in different structures with nanoscale channels. Compounds 1 and 2 form 2-D layer structures, but 3 has a two-fold interpenetrated 3-D framework. The magnetic properties associated with their crystal structures were investigated.     

氢化物发生—原子荧光法测定地球化学样品中痕量铅

研究了铁氰化碱性体系下痕量氢的化物发生－原子荧光测定的方法。本方法克服了在酸性样品溶液中加入铁氰化钾后对样品分析产生的问题，具有操作简便。分析结果重现性好等特点。对二十六个国家一级地球化学标准物质进行了分析，获得满意结果。     

氟化物催化硅氢化合物和取代酚的脱氢偶联反应

通过等摩尔竞争反应研究了氟化物催化的硅氢化合物和取代酚的脱氢偶联反应机理。研究表明，ｐ－ＸＣ６Ｈ４ＯＨ在反应中的取代基效应与氟化物催化取代苯甲醛ｐ－ＸＣ６Ｈ４ＣＨＯ的硅氢化反应中的不同，这表明它们的反应机理存在差异，在这两种反应中，虽然Ｆ＾－对Ｓｉ的配位都促进了硅氢化合物中的Ｈ对底物中带正电荷原子的亲核进攻，但是在催化酚解反应中，由于没有四中心过渡态的形成，因此下一步取代酚中的氧原子对Ｆ＾－配位的     

Standards for pH measurements and first ionization constants ofo-phthalic acid. Methylcellosolve-water solvent mixtures from −10 to 45°C

From reversible emf measurements of the cell Pt/H₂/KHPh+KCl/AgCl/Ag/Pt, reference value pH-metric standards, pH _RVS , for 0.05 mol-kg^–1 potassium hydrogenphthalate (KHPh) reference buffer solutions in 20, 50, and 80 wt % methylcellosolve (2-methoxyethanol, CH₃O-CH₂CH₂OH)-water solvent mixtures from –10 to +45°C, have been determined in compliance with the criteria endorsed by IUPAC. The corresponding values of the first ionization constant ofo-phthalic acid (H₂Ph, benzene-1,2-dicarboxylic acid), which is a key quantity for the acquisition of pH _RVS standards, have been determined from emf measurements of the reversible cell Pt/H₂/H₂Ph+KHPh+KCl/AgCl/Ag/Pt.     

An Improved Method for Micro-Fluorimetric Determination of 6-Mercaptopurine

Abstract

A sensitive and specific fluorimetric assay for 6-mercaptopurine (6-MP) is described. The method consists of enzymatic (xanthine oxidase) conversion of 6- MP to the oxypurine derivatives, followed by oxidation with acidic chromate to the corresponding 6-sulfonate. The fluorescent product has excitation and emission maxima at 330 and 400 nm, respectively. The good recovery and reproducibility were obtained. The sensitivity (the smallest amount detectables) was about 22 pg/ml for 6- MP in water. Different spiked serum samples containing 6-MP and azathioprine (AZA) were also analyzed and the sensitivity for 6-MP was about 2.2 ng/ml.     

Radiation-Induced Polymerization of Vinylidene Chloride in Bulk and Included in Thiourea Crystals

Vinylidene chloride (VDC) or 1,1-dichloroethylene was polymerized with γ radiation in bulk or as inclusion complex in thiourea crystals (inclusion polymerization). The resulting poly(vinylidenechloride) (PVDC) samples obtained from the two different polymerization techniques were characterized by FT-IR and electronic absorption spectroscopies, by ozonolysis and by thermal analysis (TGA, DTG and DTA). It was found that two selective secondary reactions occur in the two PVDC samples, respectively obtained from bulk polymerization or from inclusion polymerization. In the former case, the main reaction is only a crosslinking reaction, while in the latter case, with the PVDC included into the thiourea channels, the crosslinking reaction is fully inhibited and instead a dehydrohalogenation reaction takes place producing the polyene structures. The presence of polyene structures in the PVDC synthesized by the inclusion polymerization was demonstrated by electronic absorption spectroscopy and by ozonolysis experiments. The presence of polyene segments in the PVDC causes a reduction in the thermal stability of the polymer, lowers its melting point and reduces its crystallinity.     

Synthesis,Characterization and Application of Amphiphilic Copolymer Poly(vinyl alcohol)-g-Poly(butyl acrylate)

An amphiphilic graft copolymer poly(vinyl alcohol)-g-poly(butyl acrylate) (PVA-g-PBA) was synthesized by grafting butyl acrylate (BA) onto poly(vinyl alcohol) (PVA) with potassium persulfate (KPS) as free radical initiator in N₂ atmosphere and aqueous medium. The formation of graft copolymer was confirmed by means of infrared spectroscopy (IR). The influences of initiator, monomer concentration and reaction time on the percentage of monomer conversion(C _M), graft degree(Gd) and graft efficiency(Ge) have been discussed in detail. PVA-g-PBA was used as compatibilizer in blends of chlorinated polyethylene (CPE)/ poly(acrylic acid-co-acrylamide)[P(AA-AM)], and the compatibility between CPE and P(AA-AM) was also investigated.