非线性光学材料──水草酸铵

一水草酸铵（简称ＡＯＭ）是一种优良的电光晶体￣［１］。文献￣［１，２］报道了该晶体的晶体结构，化学式为（ＮＨ＿４）＿２Ｃ＿２Ｏ＿２·Ｈ＿２Ｏ，属正交晶系，Ｐ２２２空间群，晶胞参数ａ＝０．８０３５ｎｍ，ｂ＝１。０３１ｎｍ，ｃ＝０．３８０１ｎｍ，ｚ＝２。本文拟报道ＡＯＭ单晶生长，热化学分析，透过波段以及非线性光学性质的初步研究。     

表面能与晶体生长/溶解动力学研究的新动向

界面现象使物质在结晶过程中出现了临界现象.但最近的研究指出在物质溶解过程中,在表面能量的控制下也存在着临界现象以及尺寸效应.实验发现,当晶体自身小到一 定的程度时(通常在纳米尺度上并和临界蚀坑的大小相近),在溶解过程中其速度会自发降 低,反应被抑制乃至停止.尽管在热力学上表面能的因素可以赋予小颗粒晶体较大的溶解度 ,但表面能却也能通过对临界条件的控制而使这些微粒在动力学上不被溶解.这个发现不仅 解决了纳米颗粒在水溶液中稳定性的问题,而且还从动力学的角度解释了生物矿物选择纳米 尺度作为其基本构成单元的原因.由于表面能和晶体生长/溶解的动力学有着密切的关系, 我们可以通过对表面能的调节来修改它们的动力学速度和晶体的形貌.反过来,也可以用动力学的方法来测定表面能及表面吸附/脱附常数等.相对于常规的界面研究手段,通过生 长和溶解动力学途径所得的数据有着很好的可靠性及重复性.我们认为,晶体生长和溶解的 动力学和表面能的研究相结合,不仅为界面研究提供了新的思路和方法,而且也会推动晶体生长和材料科学的发展.     

大肠杆菌有限生长的微量热及非线性动力学研究

The finite growth of Escherichia coli was studied by using a LKB 2277 BioActivity Mollitor. We found that the finite growth is a nonliear dynamic process. The nonlinear dynamic behaviour in the finite growth process and the nonlinear dynamic models describing the process were discovered and established. The curve of logistic map corresponding to the finite growth thermogram of Escherichia coli was obtained and the nonlinear dynamic parameters were calculated by means of a computer. Moreover, we also discussed the nonlinear dynamic characters of Escherichia colt in its finite growth process.     

Thermal behaviour of ethynyl and ethenyl terminated imide resins

A series of ethynyl and ethenyl end-capped imide resins were synthesised by the reaction of 9,9-bis(4-aminophenyl) fluorene (BAF) with pyromellitic dianhydride (PMDA)3/3′, 4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and 3-ethynyl aniline/maleic anhydride. Structural characterisation was done by infra red and elemental analysis. Thermal characterisation was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperatures of cured resins were above 200°C in nitrogen atmosphere. Char yield at 800°C ranged from 59–65.5%.     

Ternary rare-earth alumo-silicides—single-crystal growth from Al flux, structural and physical properties

A number of rare-earth alumo-silicides (R-Al-Si) have been synthesized from the corresponding elements by high-temperature reactions, carried out in excess of aluminum to serve as a flux. Under these experimental conditions, large single crystals of all R-Al-Si ternary phases were readily produced. The crystal structures these ternaries adopt were studied by means of powder and single-crystal X-ray diffraction and were classified as follows: (1) the early rare-earths (R=La, Ce, Pr, Nd, Sm, Gd) yield RAl_xSi_2−x, x∼1, non-stoichiometric ternary derivatives of the body-centered α-ThSi₂-type; (2) the late rare-earths (R=Tb, Dy, Ho, Er, Tm) form stoichiometric R₂Al₃Si₂ compounds that crystallize in the C-centered monoclinic Y₂Al₃Si₂-type; (3) the divalent Eu and Yb produce EuAl₂Si₂ and YbAl₂Si₂ with the trigonal CaAl₂Si₂-type, whereas the last lanthanide element, Lu, forms LuAlSi with C-centered orthorhombic YAlGe-type. These structural trends are reviewed, and the evolution of the basic physical properties such as magnetism, heat capacity and electrical resistivity when moving across the series is described in detail.     

Growth and Characterization of Crystal Nd_(0.06)Y_(0.94)Sr_6Sc(BO_3)_6

<正>The crystal of Nd0.06Y0.94Sr6Sc(BO3)6 with the dimensions up to 35 mm × 28 mm × 13 mm was grown by a top-seeded solution growth method from Li6B4O9 flux. The grown crystal was characterized by X-ray powder diffraction. The optical absorption of the crystal shows that it has a strong absorption band at 8070 A, and the absorption coefficient is 2.17cm-1 with a FWHM of 41 A, which can match with the wavelength of the diode-laser (LD) and is suitable for the LD pumping. Based on the Judd-Ofelt theory, the three parameters of line oscillator strength Ω(λ) (λ = 2, 4 and 6) of the Nd3+ion in the crystal were calculated as follows: Ω2= 1.194 × 10-20, Ω4= 4.186 × 10-20 and Ω6 = 3.351 × 10-20cm2, which are relatively larger. The results indicate that the crystal Nd0.06Y0.94Sr6Sc(BO3)6 may be a kind of high-efficient laser material for diode-pumped.     

Preparation of Mn3O4 nanocrystallites by low-temperature solvothermal treatment of γ-MnOOH nanowires

The preparation of trimanganese tetroxide (Mn₃O₄) nanocrystallites from γ-MnOOH nanowires under mild conditions has been achieved by two steps: first, γ-MnOOH nanowires with a mean diameter of about 12 nm and lengths of up to several micrometers were directly prepared via hydrothermal reaction between KMnO₄ and toluene in water at 180°C for 24 h; then, pure Mn₃O₄ nanocrystallites could be obtained by solvothermal treatment of the γ-MnOOH nanowires in ethylenediamine (EDA) and ethylene glycol (EG) at 150°C for 24 h. It was found that the Mn₃O₄ product obtained in EDA comprised well-defined nanocrystallites with the size in the range of 15-35 nm, while the one obtained in EG consisted of aggregated nanoparticles with the size of less than 18 nm.The possible formation mechanism of nanocrystalline Mn₃O₄ in EDA and EG and reasons for the different effects of various solvents on the products were also proposed.