Optical and electric properties of Nb-doped anatase TiO2 single crystal

Nb-doped anatase TiO₂ single crystal has been grown by chemical vapour transport method. Raman spectra shows that the obtained crystal with Nb of 0.08 wt% has typical anatase structure. An absorption band was observed at around 2.2 eV, which seems to be due to the d-d transition in the conduction band. The electron paramagnetic resonance and electric resistivity measurements show that the doped niobium makes quite shallow donor level whose orbital is d_xy-like centered at the titanium position of anatase.     

Photoluminescence characteristics of ZnTiO3: Bi nanocrystals

The photoluminescence properties of the Bi³⁺ in sol-gel derived ZnTiO₃ nanocrystals have been investigated. An ultra-violet emission at 360 nm and a visible emission band at 506 nm have been observed, originating from two kinds of emission centers. The former is ascribed to the ³P₁-¹S₀ transition of Bi³⁺ and the latter to the recombination of the electrons with the photo-generated holes trapped in the zinc vacancies. In all cases the latter contribution is predominant.     

A study on anisotropy of L2 to L3 Coster-Kronig transition (f23) for Th and U elements

The Coster-Kronig transition, f₂₃, was determined using differential fluorescence cross sections of L_l X-ray for Th and U. The targets were irradiated an Am-241 radioisotope at the different incident angle. The L_l X-rays were counted with a Si (Li) detector at the different scattering angle varying from 60° to 90° at 10° intervals. For each angle, the Coster-Kronig transition probability, f₂₃, was found. An obtained Coster-Kronig transition probability value was fitted versus emission angle. According to present results we can say that the Coster-Kronig transition probability, f₂₃, shows isotropic distribution.     

A technique to construct symmetric variable-stepsize linear multistep methods for second-order systems

Some previous works show that symmetric fixed- and variable-stepsize linear multistep methods for second-order systems which do not have any parasitic root in their first characteristic polynomial give rise to a slow error growth with time when integrating reversible systems. In this paper, we give a technique to construct variable-stepsize symmetric methods from their fixed-stepsize counterparts, in such a way that the former have the same order as the latter. The order and symmetry of the integrators obtained is proved independently of the order of the underlying fixed-stepsize integrators. As this technique looks for efficiency, we concentrate on explicit linear multistep methods, which just make one function evaluation per step, and we offer some numerical comparisons with other one-step adaptive methods which also show a good long-term behaviour.

     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

具有生产性与福利性公共支出的随机内生增长模型

文章建立一个随机内生增长模型来阐明主要政策参数对经济增长与社会福利的影响.若对生产函数、效用函数、偏好及随机干扰作一些特殊的假设,我们证明了主要政策参数的均衡值能被模型参数唯一决定.进一步我们还得到了期望增长率与储蓄的清晰解.文章的最后,我们证明了政府支出直接影响个体决策者的决策:即提高经济增长率将减少福利;反之,增加福利将减少增长率.     

Deposition of boron nitride on graphite at 1300 K

A method for the deposition of BN onto graphite and other substrates is described. Boron trichloride (BCl₃) and ammonia (NH₃) diluted with Ar were used as reacting gases. The deposition process was carried out at 1300 K as well as lower temperatures in an open system at pressures of 1 atm. The consequences of the introduction of hydrogen to the system were considered. It was demonstrated that the replacement of argon with hydrogen increases the efficiency of the process as well as the theoretical rate of BN deposition. However, the acceleration of the deposition seems to be unprofitable, because the resulting supersaturation leads to the formation of an amorphous phase. The modification of the experimental conditions were proposed.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

激光二极管端面抽运的棒状Yb：YAG激光器

分析了影响激光二极管抽运Yb：YAG激光器调Q效率的参量，推导了激光二极管端面脉冲抽运Yb：YAG晶体的速率方程，解出了双程抽运情况下的净抽运量子产率。利用数值计算方法，模拟了净抽运量子产率与晶体长度，抽运光脉冲宽度等关系，得出晶体长度的优化可以提高Yb：YAG激光器输出效率。计算了词Q Yb：YAG激光器的最大增益、最大储能，分析了放大自发辐射对于Yb：YAG能量存储的影响。同时给出了激光二极管端面抽运调Q Yb：YAG优化设计方法。这些分析和计算为实际器件的研制提供参考。     

一种求解混合多目标规划问题的功效函数法

逻辑生长函数相对于龚珀兹生长函数具有拐点高和对称性的特点,采用逻辑生长函数形式的功效函数法求解混合多目标规划问题具有形式简单、计算量小、符合实际的优点。证明了用这种方法求出的最优解是有效解。讨论了满意值对有效解的影响。逻辑生长函数还可以应用于多维变量评价的功效系数法中。