Determination of Size Distribution of Nano-particles by Capillary Zone Electrophoresis

A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied. This method for the determination of size distribution was statistical.     

高比表面积窄孔分布氧化铝的制备研究 Ⅰ.沉淀条件的影响

 以硫酸铝液为原料，以氨水、氢氧化钠和铝酸钠为碱沉淀剂，采用pH摆动法制备了高比表面积、大孔径、窄孔分布、大孔体积氧化铝，考察了沉淀剂、沉淀温度及沉淀时酸侧pH值对氧化铝物性的影响，并对pH摆动法与等pH沉淀法的结果进行了比较．结果表明，通过改变制备参数可以获得高比表面积、大孔体积的氧化铝，当沉淀温度为70℃，pH摆动3或4次时，氧化铝的孔体积可高达1．0ml／g，比表面积仍大于300m2／g．用pH摆动法制得的样品比用等pH沉淀法制得的样品容易酸溶，对挤压成型有利．不同样品在酸溶液中的分散性表明，用氨水沉淀剂可获得相对较小的沉淀粒子．改变沉淀时酸侧的pH值，可导致沉淀粒子的结构发生变化．     

超声波处理对球形β-Ni(OH)2结构及电化学性能的影响

A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.     

SYNTHESIS AND PROPERTIES OF POLYSTYRENE／LAPONITE NANOCOMPOSITES

Exfoliated polystyrene (PS)/laponite nanocomposites were prepared successfully. The characteristic doo1 diffraction peak of organo-laponite disappeared in the XRD patterns of nanocomposites, indicating that the laponite layers were exfoliated and the ordered crystal structure of laponite was destroyed because of the styrene polymerization. TEM observations showed that the exfoliated laponite primary particles were dispersed randomly in the PS matrix with lateral dimensions from 1 nm to 10 rim. SEM results showed that the PS/laponite nanocomposite particles were almost monodispersed spheres with the size of about 120 rim. Because of the interaction between PS and laponite nanolayers, the nanocomposites exhibited higher thermal stability and glass transition temperature when compared to pure PS.     

Two new bounds on the size of binary codes with a minimum distance of three

We prove two new upper bounds on the size of binary codes with a minimum distance of three, namelyA(10, 3)76 andA(11, 3)152.     

Grain boundary segregation diagrams of α-iron

Based on thermodynamic analysis of interfacial segregation, the segregation enthalpy H ^o of a solute I in a given matrix was found to depend linearly on two mutually independent terms reflecting the type of interface and the solid solubility limit X _infI ^sup* at temperature T and can be written as In this equation, the structural dependence of interfacial segregation is contained in H ^*() which corresponds to the extrapolated segregation enthalpy of a solute with unlimited solubility in the matrix. The product [Tln(X _infI ^sup* )] is essentially constant with temperature, and can therefore be obtained from data for maximum solid solubility, [Tln(X _infI ^sup* )]_max. The parameter v>0 represents the relationship between the activity a _infI ^sup* of a solute at the bulk solid solubility limit in a given matrix and X _infI ^sup* , a _infI ^sup* =(X _infI ^sup* ) ^v , and is characteristic for the matrix. Using recent experimental data for silicon, phosphorus, and carbon segregation at well-characterized grain boundaries in oriented bicrystals of -iron, the averaged value was determined. Values of H ^*() range from -8 kJ/mol (general grain boundaries) up to +8 kJ/mol (special grain boundaries). These values are discussed and used for a more precise and generalized construction of grain boundary segregation diagrams of -iron.     

Mechanism of lamellar spacing adjustment in directionally frozen agar gels

A theory is presented for predicting the size of ice crystals which result from steady-state, unidirectional growth within aqueous agar gels. Cellular arrays of adjacent ice crystals were separated by an amorphous water-agar membrane at a composition near the vitrification point. Using this vitrification composition and both a steady-state condition and a minimum free energy criterion, the size of ice crystals was predicted for a given solidification velocity and diffusion condition. It was found, however, that this simple model could not predict the trend towards larger crystal sizes that was observed when the initial agar concentration in the gels increased from 3% to 10% by weight agar.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Al3Ti1B1RE细化剂对罐用铝材的细化效果及稀土的作用

采用XRD，OM，SEM，EDAX等探讨了一种新型Al3Ti1B1RE中间合金细化剂对罐用铝材的细化效果及RE的作用。结果表明，该细化剂对罐用铝材的细化效果优于进口和国产Al3Ti1B，且具有长效性，达6h后仍未见明显衰退，明显提高了该材料的强度和塑性；其细化效果及稳定性好的主要原因是：RE可降低铝液的表面能，增加铝液对细化核心(如TiAl3，TiB2)的润湿性，既充分发挥了异质形核作用，又防止了TiB2聚集沉淀倾向；RE也极易在结晶前沿富集造成成分过冷，阻碍了α-Al晶粒生长，并促进其在细化核心上形核；此外RE还兼有一定的净化、细化和变质作用，尤其是净化作用提高了该细化剂的冶金质量。     

Finite-size scaling and the renormalization group

Renormalization group calculations ind = 4 andd = 4 – are performed for a system of finite size. A form of mean-field theory is used which yields a rounded transition for a finite system, and this allows a sensible expansion in fluctuations. A combination of Ewald and Poisson sum techniques is used to produce explicit numerical results for the specific heat ind = 4 which, with the setting of two nonuniversal metrical factors and the fourth-order coupling constant may be compared with simulations. The numerical visibility of logarithmic corrections is investigated. The universal scaling function for the specific heat to relativeO() is also evaluated numerically.