Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

Synthesis and characterization of segmented liquid crystal poly(azoxy polyester-co-polyoxypropylene)

In this study a series of a segmented copolyester, poly(4,4′-dioxy-2,2′-dimethyl-azoxybenzene dodecanedioyl) (PMABD)-co-polyoxypropylene 400 (POP), was prepared. The chain length of PMABD studied (n) was varied from 7.8-18.2, and that of POP was unchanged. The intrinsic viscosity of the segmented copolyesters was 1.04-1.30, and the number average molecular weight obtained was 2.53 × 10⁴?3.49 × 10⁴ g/mol. The mesophase texture and thermal properties of the segmented copolyesters were measured as functions of n. It was found that the insert of flexible POP between those liquid crystalline domains of PMABD did affect thermotropic properties of PMABD. As the n value was 9.0 and 7.8 (or 7.4 and 8.6% by weight POP) the texture appeared as cholesteric-like oily streaks. The effect could not be attained by simply copolymerizing a mesogenic moiety with a pair of spacers of different lengths. The fluidity and domain structure of the flexible dodecanedioyl-POP-dodcanedioyl segments are taken into account for the obtained results. © 1995 John Wiley & Sons, Inc.     

利用大分子单体技术合成接枝共聚物

大分子单体和小分子共单体共聚是合成接枝共聚物的重要途径之一。本文综述了大分子单体通过各种聚合方式(自由基共聚、离子型共聚、配位共聚、基团转移共聚和逐步共聚)和普通小分子单体的共聚反应,详细讨论了大分子单体和小分子单体的自由基共聚反应动力学,并简要介绍了接枝共聚物的应用背景。     

马来酸酐与聚烯烃接枝产物的表征

综述了马来酸酐与聚烯烃接枝产物的多种表征手段，重点分析了纯化处理，化学滴定以及红外分析方法的表征原理，应用和改进方法。     

Copolymerization of acrylonitrile with itaconic acid in dimethylformamide: effect of triethylamine

The copolymerization of acrylonitrile (AN) in dimethylformamide (DMF) was retarded by the presence of itaconic acid (IA) comonomer. Addition of TEA helped overcome the retardation at enhanced concentrations of IA in the feed. The monomer reactivity ratios determined by both terminal and penultimate models revealed that the overall monomer reactivity’s are practically unaffected by the presence of TEA. The penultimate-unit effect for radicals terminated in AN was enhanced by the presence of TEA. Higher TEA concentrations helped regain the reactivities of AN and IA to AN-radical to the state in pure DMF. The penultimate model could explain the feed-copolymer composition profile for the whole range. Whereas IA systematically retarded the polymerization rate at all concentration regime in DMF, it increased the rate at higher IA concentration in DMF/TEA system. For a given IA concentration, the polymerization rate decreased as the solvent is enriched in TEA. The copolymers synthesized in the presence of TEA, manifested higher cyclization temperature and consequently lower char residue, attributed to the incorporation of TEA in the polymer by means of salt formation with IA moiety camouflaging the catalytic effect of the -COOH group in cyclization reaction. ¹³C-NMR studies confirmed the incorporation of the TEA molecules in the polymer chain.     

Optical Alignment of Organic Dopants in a Solid Gel Matrix: Dispersed and Grafted Rhodamine B Molecules

We study herein the rotational mobility of organic dye molecules and their ability to align on a strong optical electric field when they are encaged in the pores of an inorganic silica xerogel matrix. We compare the case of dye molecules simply dispersed in the pores of the gel—and possibly held by hydrogen bonds—to the case of molecules chemically grafted on the inner surface of these pores through covalent bonds. The study is led on hybrid silicon-zirconium based inorganic matrices doped with organic rhodamine B molecules. The stronger holding of the dopants when these are grafted to the matrix enhances the molecular alignment—and thus the induced anisotropy—as well as the remanence of this alignment. Furthermore, we show that submitting the samples to a supplementary drying at higher temperature tends to increase both the alignment anisotropy and its stability. We explain these results in terms of mobility of the molecules, in relation to their immediate environment.     

Carboxylic acid functionalization of nylon 6 by radiation grafting and conversion to zinc salts: Effects on physical properties

 Functionalization of polymers by grafting monomeric species on to the backbone of molecular chains with the use of γ-radiation has been used extensively. In this work methacrylic acid was grafted onto a commercial grade of polycaproamide (Nylon 6) by preirradiating the polymer granules to 15 kGy at a rate of 1.0 kGy per hour and subsequently immersing these in a 10% aqueous solution of methacrylic acid in the presence of small quantities of FeSO₄ as homopolymerization inhibitor. The polymer was subsequently neutralized by mixing it with zinc acetylacetonate in a laboratory scale melt mixing device. The acid-grafting polymer modification resulted in an increase in glass transition temperature, while the addition of zinc acetylacetonate gave rise to two transitions: The lower transition corresponds to a miscible mixture of free polyamide and acid-grafted polymer, both plasticized with undecomposed zinc compound, while the upper transition corresponds to the zinc salt of the acid grafted polyamide. Through rheological measurements it was shown that both the acid-grafted polymer and the derived zinc salt have a branched structure, possibly containing also some crosslinked domains. Large improvements in solvent resistance were observed for both type of polymer modifications. Received: 13 December 1996 Accepted: 10 February 1997     

Grafting of functionalized silica particles with poly(acrylic acid)

Two different methods to graft silica particles with poly(acrylic acid) (PAA) were studied. In the first method PAA was reacted with 1,1′‐carbonyldiimidazole to give functionalized PAA. The resulting activated carbonyl group reacted easily with 3‐aminopropyl‐functionalized silica at low temperatures. In the second method 3‐glycidoxypropyl‐functionalized silica particles were reacted directly with PAA by using magnesium chloride as a catalyst. Different molecular weights of PAAs were used in order to investigate the effect of molecular weight on grafting yields in both methods. The grafting yields were determined with thermogravimetric analysis (TGA). All products were also investigated with IR. The results showed that the yields of reactions performed at ambient temperature by using 1,1′‐carbonyldiimidazole‐functionalized PAA were the same as with a direct reaction of unfunctionalized PAA and 3‐aminopropyl‐functionalized silica performed at 153°C. Also in reactions between 3‐glycidoxypropyl‐functionalized silica and PAA the yields were satisfactory. Copyright © 2006 John Wiley & Sons, Ltd.