三醋酸甘油酯的气相色谱分析

本文介绍了一种快速、简便的测定高含量三醋酸甘油酯的气相色谱法。本法使用10%PEG-20M涂渍在Chromosob W上的色谱柱(2 m×3 mmi.d.),以N_2作载气(40ml/min)氢火焰离子化检测器(FID),柱温180℃,汽化温度200℃,能很好地将三醋酸甘油酯与二醋酸甘油酯分离。并选用十二醇为内标物测定了十批合成样品中的三醋酸甘油酯含量,变异系数<0.4%。     

A chromatographic comparison of the pore structure of zirconia high performance liquid chromatographic materials made by the polymerization induced colloidal aggregation and the Oil Emulsion methods

Summary The pore structures of zirconium oxide particles prepared by two different methods (PICA and Oil Emulsion processes) are compared. Nitrogen sorptometry and size exclusion chromatography are used to characterize the two different types of particles. Significant and unexpected differences were found in the accessible pore volumes and the bed packing densities of the two materials. The PICA material was found to have a higher totally included and totally excluded volume than would be normally expected. The chromatographic method provides results which are more useful for the application of these materials to separation sciences.     

凝胶色谱法测定顺丁橡胶平均分子量及其分布的研究

通过一系列的条件试验,包括样品浓度、样品量及流动相流速对柱效的影响,确定了最佳的凝胶色谱（ＧＰＣ）试验条件;采用普适校正法将聚苯乙烯（ＰＳ）标定曲线转换成顺丁橡胶（ＰＢ）标定曲线,并对Ｍａｒｋ－Ｈｏｕｗｉｎｋ方程式中Ｋ,α值的选择进行了讨论;采用４种分子量加宽方程对色谱柱加宽效应进行改正计算,通过比较,选定适合本试验系统的加宽效应的改正方法;用粘度法测得的顺丁橡胶特性粘度（η）吻合ＧＰＣ所测得特性粘度值,证明了方法的可靠性。     

草一光可湿性粉剂活性成分的反相高效液相色谱分析

采用反相高效液相色谱法同时测定15.5％草一光可湿性粉剂中的异丙甲草胶和苄嘧黄隆两种活性成分,以V（甲醇）：V（酸性水）=70：30作为流动相,采用ZORBAXSB-C18色谱柱。方法回收率达98.1％～102.6％,变异系数为0.4％～0.8％。     

Fast gas chromatography-negative-ion chemical ionization mass spectrometry with microscale volume sample preparation for the determination of benzodiazepines and alpha-hydroxy metabolites, zaleplon and zopiclone in whole blood

Fast gas chromatography/negative-ion chemical ionization mass spectrometric (GC/NICI-MS) assay combined with rapid and nonlaborious sample preparation is presented for the simultaneous determination of benzodiazepines and alpha-hydroxy metabolites, zaleplon and zopiclone in whole blood. The compounds were extracted from 100 microl of whole blood by simultaneous multitube, microscale liquid-liquid extraction (LLE) and derivatized by N-methyl-N-(tert-butyldimethylsilyl)trifluoroacetamide (MTBSTFA), without the need for the time-consuming concentration stage. In the analytical separation, various parameters of fast GC/NICI-MS were applied, e.g. the use of hydrogen as a GC carrier gas, a high carrier gas velocity, a small film thickness of the analytical column, fast MS data acquisition, fast temperature ramping, and high initial and final temperatures of GC column. Sensitive identification, screening and quantitation of 18 compounds of interest were achieved in chromatographic separation in only 4.40 min. Accurate and reproducible results were obtained by using five different and carefully selected deuterated analogues on the basis of the chemical properties of the target analytes. Nevertheless, for alpha-OH-midazolam, and for bromazepam and flunitrazepam at low concentrations, the results can be considered only semiquantitative on the basis of the validation data. The extraction efficiencies ranged from 74.3 to 105.7% and the limits of quantitation (LOQ) from 1 to 100 ng ml(-1). Rapid sample preparation and fast chromatographic separation allowed cost-efficient, reliable and high sample-throughput analyses with a low amount of manual work. The method was fully validated and accredited according to EN ISO/IEC 17025 standards and is applicable for sensitive, reliable and quantitative determination of benzodiazepines, zaleplon and zopiclone, e.g. in clinical and forensic toxicology.     

The Review of the Catalyst System of Poly（ethylene oxide）

聚氧化乙烯（PEO）是环氧乙烷经开环聚合而成的一种多功能水溶性聚合物,性能优异,用途广泛。本文简述了聚氧化乙烯的典型特征和国内外研究进展,综述了聚氧化乙烯制备的各类催化剂体系,描述了催化剂聚合环氧乙烷的聚合机理,重点介绍了几种具有工业应用前景的催化剂体系：烷基金属催化剂体系、烷氧基金属催化剂体系和碱土金属氨化物催化痢体系。并对其技术发展和应用进行了展望。     

An Ionic Liquid Loaded β-Cyclodextrin-Cross-Linked Polymer as the Solid Phase Extraction Material Coupled with High-Performance Liquid Chromatography for the Determination of Rhodamine B in Food

A novel method for separation and determination of rhodamine B in food samples is described. The work is based on the utilization of an ionic liquid loaded β-cyclodextrin cross-linked polymer coupled with high-performance liquid chromatography for the determination of rhodamine B. The inclusion interaction of the ionic liquid-β-cyclodextrin cross-linked polymer with rhodamine B was studied by FTIR. Under optimum conditions, the preconcentration factor achieved for this method was approximately 20. The linear range, detection limit, and relative standard deviation were 0.80 to 130.0 µg L^?1, 0.09 µg L^?1, and 0.66% (n = 3, concentration = 10.0 µg L^?1), respectively. The technique was successfully applied for determination of rhodamine B in food samples.     

The electron microanalyzer (EPMA): a powerful device for the microanalysis of filled polymeric materials

The electron probe microanalyzer is a device often used in the field of geology or in the glass and steel industries. However, it is barely known or used in the polymer field. Thus, in this paper, we investigate the use of electron probe microanalyzer for polymer microanalyses and compared it with a scanning electron microscope equipped with an energy dispersive spectrometer. To show the unique potential of this technique only develop in our lab for polymer application, three different samples were studied: (i) a fire protective epoxy‐based coating submitted to aging in salt water, (ii) the distribution of organometallic catalysts into a thermal isolative silicone polymer, and (iii) the fouling growth of milk protein (biopolymer) on a stainless steel surface. Compared to an energy dispersive spectrometer, with an electron probe microanalyzer it is possible to quickly create X‐ray mappings of low concentration elements at a good resolution, as well as allowing the interpretation of the mechanism of action for the three samples which was impossible using only an energy dispersive spectrometer because of its too low detection resolution. Copyright © 2015 John Wiley & Sons, Ltd.     

新型环糊精手性色谱拆分材料的点击化学调控及拆分性能研究

通过点击化学方式对单叠氮环糊精进行衍生,引入具备不同作用位点的功能化基团,对环糊精手性分离性能进行调控.首先通过醚键将单叠氮环糊精接枝到硅胶表面,进一步通过Cu(I)催化的1,3-偶极环加成反应(点击化学)在环糊精小口端分别引入叔丁基、苯基、酯基和羟基基团,构建了4种新型环糊精手性固定相并通过红外光谱和元素分析对其进行了结构表征.通过高效液相色谱反相分离模式实现了异噁唑啉和丹磺酰氨基酸共16种对映体的手性拆分.酯基功能化的环糊精手性固定相对多数异噁唑啉类有良好的拆分效果,其中,2-氯苯基-异噁唑(2ClPh-OPr)分离度可达1.62.丹磺酰氨基酸类最佳分离pH值为5.0,叔丁基功能化固定相具有最好的分离效果,大部分样品可实现基线分离(Rs＞1.5).     

Rapid determination of trace polycyclic aromatic hydrocarbons in particulate matter using accelerated solvent extraction followed by ultra high performance liquid chromatography with fluorescence detection

A method has been developed for the trace analysis of polycyclic aromatic hydrocarbons, which are known as persistent organic pollutants and ubiquitous constituents of fine particulate matter that causes growing airborne pollution. The method, which was especially for samples of airborne particulate matter less than 2.5 μm in diameter, utilized accelerated solvent extraction and ultra high performance liquid chromatography with fluorescence detector. Four principal parameters of accelerated solvent extraction were optimized to obtain maximum extraction efficiency. Using the established synergetic programs of gradient elution and fluorescence wavelength switching, a rapid separation was achieved in 6.56 min with good linearity for 15 polycyclic aromatic hydrocarbons (coefficient of determination above 0.999). The limits of detection ranged from 0.833 to 10.0 pg/m³. The precision of the method expressed as inter‐day relative standard deviation ranged from 0.2 to 1%, which was calculated from nine repetitive measurements of 8.00 μg/L analytes. Average spiked recoveries ranged from 71.6 to 97.7%, with the exception of naphthalene. The rapid, sensitive, and accurate method can meet the pressing needs of health risk assessment and increasingly heavy daily tasks of air quality monitoring.