Simultaneous determination of four sedative-hypnotics in human urine based on dendritic structured magnetic nanomaterials

A magnetic solid-phase extraction technique based on magnetic dendritic structured nanoparticles (Fe₃O₄@SiO₂-NH₂-G5) as adsorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) has been developed to detect diazepam, midazolam, zolpidem, and zaleplon in human urine. With Fe₃O₄@SiO₂-NH₂ as the central core, dendrimer (G5) grafted alternately with cyanuric chloride and imidazole were bonded to the surface of the core to synthesize Fe₃O₄@SiO₂-NH₂-G5. The morphology and structure of the magnetic materials were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and dynamic light scattering (DLS). The key parameters affecting the extraction efficiency were optimized. A satisfactory performance was obtained under the optimum extraction conditions. The proposed method was validated, and the limits of detection of zaleplon, diazepam, zolpidem, and midazolam were 0.05, 0.05, 0.02, and 0.02 ng mL^?1, respectively. The linear correlation coefficients r of the four analytes were > 0.996, the intra-day precision was between 2.4 % and 9.4 % with the recoveries between 88.3 % and 104.8 %, and the inter-day precision ranged from 3.9 % to 15.2 % with the recovery in the range of 94.1 %?108.3 %. The magnetic dendritic structure nanomaterial Fe₃O₄@SiO₂-NH₂-G5 was successfully used to extract sedative-hypnotic drugs from human urine samples. The Fe₃O₄@SiO₂-NH₂-G5-based magnetic solid-phase extraction method eliminates centrifugation and filtration steps as in conventional extraction. Only one step of vortex dispersion extraction could achieve the separation and purification of the target compounds. The proposed method was simple, rapid, environment-friendly, and suitable for the analysis of sedative-hypnotic drugs in human urine.     

Controlled electropolymerization based on self-dimerizations of monomers

Electropolymerization is one of the most important methodologies to synthesize and develop conducting polymers. The complexity of the polymerization mechanism, ion doping processes and structural defects are considered to be symbiotic and unavoidable, making the stagnant state and huge band gap with advanced interdisciplinary research fields and important applications in the last three decades. Herein, we provide a point of view into controlled electropolymerization by regioselective activation reactions of monomers, where self-dimerizations instead of self-electropolymerizations were utilized. The resulting dimers play a role in the connections between functional building blocks to form functional polymers on demand. This account highlights the typical findings in controlled electropolymerizations as a forum for discussing new opportunities in exploiting novel designs and applications.     

New developments in the dye-doped polymer dispersed liquid crystals gratings: A review

In this study, the dye-doped polymer dispersed liquid crystals (PDLC) gratings techniques performed by the various research groups or being developed are briefly reviewed. Especially, the electrically switched diffraction and holographic gratings, have attained much attention by various research groups working in the PDLC-related display studies. The fabrication methodologies used for such grating texture, include like the conventional dye-doped PDLC grating, Azo-dye doped PDLC gratings, and lasing techniques etc., adopted for dye-doped PDLC gratings. The useful features and characteristics of their fabrication process of such gratings are discussed. Finally, some of the future perspectives on this particular research field are presented.     

Polypyrrole Nanoparticles Based Disposable Potentiometric Sensors

In this work polypyrrole nanoparticles of high electrochemical activity were used to prepare disposable, potentiometric sensors with a paper support. The paper support modified with polypyrrole nanoparticles served as electrical lead and ion‐to‐electron transducer and it was covered by a typical poly(vinyl chloride) based ion‐selective membrane. The properties of this arrangement were tested on example of potassium‐selective electrodes. The sensors prepared benefited from the properties of conducting polymer nanostructures: high electrical conductivity and electroactivity as well as absence of suspension stabilizing agent. The obtained electrodes were characterized with analytical parameters well comparable with those of classical ion‐selective electrodes.     

Synthesis,electrolyte properties and solar cell performance of hyperbranched poly(aryl-ether-urea)s

Hyperbranched poly(aryl-ether-urea)s with phenyl, N,N-dimethylamino ethyl and polyethylene oxide end-groups linked through urethane group – HBPEU-1, HBPEU-2 and HBPEU-3 respectively – were synthesized from an AB₂-type blocked isocyanate monomer and characterized by FT-IR, ¹H-NMR, SEC-MALLS, TGA and DSC techniques. The molecular weight of the polymers were found to be ranged from 4.9 × 10³ ? 1.96 × 10⁴ g/mol. The TGA results showed that the polymers decompose between 175°C – 220°C. In the DSC curves, HBPEU-1 and HBPEU-3 showed T_g at 160°C and 53°C respectively, whereas HBPEU-2 did not showed clear T_g. All the three polymers were converted into polymer electrolytes by doping with LiI/I₂. The doped polymers showed remarkably high ionic conductivity, up to 222 – 277 times compared to the un-doped polymers and the highest conductivity was observed with doped HBPEU-2. The TiO₂ based dye-sensitized solar cells (DSSCs) were fabricated using the doped polymer electrolytes and their performance was tested; HBPEU-2 showed good performance by yielding energy conversion efficiency (η) of 4.5%.     

Determination of Polycyclic Aromatic Hydrocarbons in Mosses by Ultrasonic-Assisted Extraction and Gas Chromatography–Tandem Mass Spectrometry

A facile method for the determination of polycyclic aromatic hydrocarbons in mosses is reported using ultrasonic-assisted extraction and gas chromatography–tandem mass spectrometry. The efficiency of ultrasonic-assisted extraction and the reagents was optimized. Tandem mass spectrometry with selective reaction monitoring was used to enhance the selectivity to reduce matrix interferences and simplify the purification protocol. The detection limits were from 0.1 to 2.0?ng/mL. The linear calibration range was two orders of magnitude and the coefficients of linear correlation exceeded 0.9992 for all analytes. The relative standard deviations within 1 day and 3 days were less than 9.0%. Recoveries from 56.8 to 109.0% were obtained in fortified mosses. The rapid, low solvent gas chromatography–tandem mass spectrometry method was used to determine polycyclic aromatic hydrocarbons in mosses.     

Development and validation of high-performance thin-layer chromatographic method for determination of amygdalin

ABSTRACT

A new method for the extraction and quantitative determination of amygdalin has been proposed. Accelerated solvent extraction was applied for the extraction, and reversed-phase high-performance thin-layer chromatography method was developed, validated, and applied for the determination of amygdalin in the extracts of apricot, plum, almond, and peach kernels. The chromatographic system used was RP-18 silica, as stationary phase and acetonitrile/water (50:50, v/v), as mobile phase. Densitometric scanning was performed at 210 nm. The method was validated with respect to specificity, linearity, precision, and accuracy. The results showed that the peak area responses were linear within the concentration range of 2.5–50.0 µg/spot (R² = 0.9984). The limit of quantification was 4.28 µg/spot, and the detection limit 1.28 µg/spot. The intra-day and inter-day reproducibility, in terms of %RSD, were in the range of 0.81–1.15 and 1.32–1.89, respectively. The accuracy data were in the range from 99.98 to 100.56%. The method is linear, quantitative and reproducible, and could be used as an efficient and economical green chromatographic procedure for the determination of amygdalin in the fruit kernel.     

Effect of ultraviolet absorption reagent for determination of piperidinium ionic liquid cations by ion pair chromatography with indirect ultraviolet detection

Indirect ultraviolet detection method is a simple and effective method for the determination of ionic liquid cations without ultraviolet absorption group. This paper focused on the influence of different background ultraviolet absorption reagents on the determination of piperidinium ionic liquid cations by ion pair chromatography with indirect ultraviolet detection. Ultraviolet absorption reagents are divided into cationic (4-aminophenol hydrochloride, 1-ethyl-3-methylimidazolium tetrafluoroborate, and N-ethylpyridinium tetrafluoroborate), anionic (potassium biphthalate and 5-sulfosalicylic acid), and amphiprotic (p-aminobenzoic acid). The results showed that piperidinium cations can be separated and detected by cationic and anionic ultraviolet absorption reagents. In general, the cationic ultraviolet absorption reagents have the best effect for separation and detection of the piperidinium cations by ion pair chromatography with indirect ultraviolet detection.     

Enantioselective Liquid Chromatographic Separations Using Macrocyclic Glycopeptide-Based Chiral Selectors

Numerous chemical compounds of high practical importance, such as drugs, fertilizers, and food additives are being commercialized as racemic mixtures, although in most cases only one of the isomers possesses the desirable properties. As our understanding of the biological actions of chiral compounds has improved, the investigation of the pharmacological and toxicological properties has become more and more important. Chirality has become a major issue in the pharmaceutical industry; therefore, there is a continuous demand to extend the available analytical methods for enantiomeric separations and enhance their efficiency. Direct liquid chromatography methods based on the application of chiral stationary phases have become a very sophisticated field of enantiomeric separations by now. Hundreds of chiral stationary phases have been commercialized so far. Among these, macrocyclic glycopeptide-based chiral selectors have proved to be an exceptionally useful class of chiral selectors for the separation of enantiomers of biological and pharmacological importance. This review focuses on direct liquid chromatography-based enantiomer separations, applying macrocyclic glycopeptide-based chiral selectors. Special attention is paid to the characterization of the physico-chemical properties of these macrocyclic glycopeptide antibiotics providing detailed information on their applications published recently.     

Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay

Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na⁺)- or lithium (SCa-3-Li⁺)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na⁺ and SCa-3-Li⁺ clays’ X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na⁺ clay presented the highest conductivity of 1.96 × 10⁻² S/cm², and Alg with 10 wt% of SCa-3-Li⁺ showed conductivity of 1.30 × 10⁻² S/cm², both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples’ transmittance and, consequently, an increase of their reflectance.