蛋白质—四氯苯醌荷移反应的分光光度研究

本文用分光光度法研究了蛋白质—四氯苯醌荷移反应。通过对影响反应各因素的研究,确立了以四氯苯醌形成荷移络合物的方法测定蛋白质的最佳条件,测定了最大结合数及反应平衡常数。     

A Novel Organic—Inorganic Complex：Synthesis and Crystal Structure of [Ca（DMSO）5（H2O）]2 SiMo12O40

It is becoming a focus to synthesize and assemble organic-inorganic materials, especially, to synthesize charge-transfer complexes formed by polyoxometalate and organic donors. They have attracted much attention because such complexes are active in their electric, magnetic and optic properties1-4, many investigations about them have been done and some crystal structures of them were reported5-6. But, the disadvantage of these crystals is instability at room temperature. According to the view…     

铁羰基络合物制备的一氧化碳加氢催化剂的研究

本文采用Ｆｅ＿３（ＣＯ）＿（１２）制备担载型络合物催化剂。采用程序升温反应技术考察了这类催化剂（ＣＯ＋Ｈ＿２）的反应性能，井使用紫外漫反射光谱和穆斯堡尔谱对催化剂进行了表征。经２５０℃和１５０℃还原的Ｆｅ／γ－Ａｌ＿２Ｏ＿３催化剂不仅活性远远高于４５０℃还原的Ｆｅ／γ－Ａｌ＿２Ｏ＿３，而且前者在反应过程中有乙烯和乙烷生成，后者则只有甲烷生成。经２５０℃还原的Ｆｅ／分子筛催化剂的活性高于４５０℃还原的Ｆｅ／分子筛催化剂，而且前者在反应过程中有乙烯、乙烷和丙烯生成，后者则只有甲烷生成。紫外漫反射谱和穆斯堡尔谱结果表明：较温和条件下活化的催化剂上有金属于属键骨架的存在。     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

乙基橙与α,β,γ-环糊精包结物诱导圆二色性的研究

本文研究了乙基橙(EO)α、β、γ、环糊精(CD~x)包结物的诱导圆二色性(ICD)。用Kirkwood偶合振动模型探讨了包结物的包结形式都为轴向包结。然后利用Job连续变量作图法确定了其络合比, 即a-CDx/EO=1:1,βCDx(γ-CDx)/EO=2:1、1:1。     

二(邻香草醛缩丙醇胺)异硫氰酸根合锰(Ⅲ)的合成与晶体结构

本文报道了一个新配合物—二(邻香草醛缩丙醇胺根)异硫氰酸根合锰(Ⅲ)的合成及其晶体结构。配合物属于单斜晶系，空间群为P2₁/c，晶胞参数为：a=8.565(1), b=21.814(2), c=12.787(2)?, β=92.80(1)°。锰为六配位，在两个邻香草醛缩丙醇胺Schiff碱配体中，一个为三齿配体，另一个为双齿配体。NCS^-离子以N在轴向上与锰发生配位，由于Jahn-Teller效应，其键长为2.193?。另外晶胞中存在着罕见的H……S-C≡N氢键。     

镍 钴 钯 铁2—（二苯基膦基）吡啶配合物的合成及其催化羰基化反应

众所周知,铑催化剂是醇类羰基化的有效催化剂,但是铑价格昂贵且对设备有腐蚀性,因此,寻找出对醇类羰基化催化活性好的非贵金属催化剂,对醇类羰化的工业化有十分重要的意义。 本文在温和条件下,合成了四种含有相同配体(Ph_2PPy)不同金属的有机配合物(金属基分别为Ni、Co、Pd、Fe),并探索了它们对乙醇羰基化反应的催化活性。     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.