New Possible Applications of Heavy Main-Group Elements in Organic Synthesis

Aside from elements of the 2nd row, and one element of the 3rd row of the periodic system—Si, P, S, and Se, respectively, whose organoelement groups such as Me₃Si and Ph₃P^⊕ have proven useful in numerous organic syntheses—other elements of the 3rd as well as 4th and 5th row (Ge, As, Sn, Sb, Te, Pb, Bi) can also be used as components of synthetically useful organoelement groups, the elements As, Sn, and Pb, in particular, offering certain advntages over the others. Some of these organoelement groups are suitable equivalents for Li- or halogen-substituents attached to carbon; they stabilize carbanionic centers (minimum of this effect at the 3rd-row elements), and owing to their suitability as leaving groups in β-eliminations, also open up interesting synthetic possibilities. The thermally unduced syn- and silica-gel induced anti-elimination of Ph₃Sn, Ph₂Sb, Ph₃Pb, together with β-OH, are novel. With the newly synthesized compounds Ph_nEl—Ch₂—Li (El = Sn, Pb, As, Sb, Bi) and other α- and β-lithiated R_nEl- and Ph₂As(O)-reagents such organoelement groups can be introduced into organic compounds and exploited in organic and organoelement synthesis.     

Selective enzyme amplification of NAD/NADH using coimmobilized glycerol dehydrogenase and diaphorase with amperometric detection

A flow system for substrate recycling of NAD⁺/NADH was set up with an enzyme reactor containing coimmobilized glycerol dehydrogenase (GDH) and diaphorase. The product from the diaphorase catalysis, hexacyanoferrate(II), aws detected amperometrically at a glassy carbon electrode. The amplification factor was 150 for a reactor volume of 100 μ l at a flow-rate of 0.5 ml/min. With a stopped flow of four minutes, the signal increased another 88 times, resulting in a signal amplification of 13 300 times. Equations are derived for the amplification factor and used for a discussion of the optimization of amplification systems. The K_m for GDH with glycerol as a substrate was found to be 5 × 10⁻³ M at pH 8.0. GDH from Cellulomonas sp. was purified on a gel filtration column and the purified enzyme showed a specificity toward NAD⁺, compared to NADP⁺, that was higher than 99.9%. Due to the NAD⁺ specificity of the purified GDH, the enzyme amplification system reported here could be used in detection systems for enzyme immunoassays when using alkaline phosphatase as a label and NADP⁺ as a substrate. The stability of immobilized GDH and diaphorase is several orders of magnitude better than that of alcohol dehydrogenase, which is the enzyme commonly used for NAD⁺-specific detection in these applications.     

Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

Recent Applications of α-Metalated Isocyanides in Organic Synthesis

Being both nucleophilic and electrophilic, α-metalated isocyanides can add to polar double bonds, forming heterocycles. They are also synthons for α-metalated primary amines. This article describes recent or improved procedures for their use in organic synthesis: (1) In heterocyclic syntheses to give 2-oxazolines, 2-imidazolines, 2-thiazolines, oxazoles and oligooxazoles, thiazoles, triazoles, imidazolinones, pyrroles, 5,6-dihydro-1,3-oxazines and -thiazines, and (via cycloaddition with nitrones) 2-imidazolidinones. (2) In the field of formylaminomethylenation, for example transformation of estrone methyl ether and a keto sugar into the corresponding α-formylaminoacrylic esters, and the conversion of aldehydes and ketones by 3- and 4-pyridyl-methyl isocyanides into N-(1-pyridyl-1-alkenyl)formamides and their hydrolysis to 3- and 4-acylpyridines. (3) In connection with the use of α-metalated isocyanides as synthons for α-metalated primary amines, the author demonstrates how they may be used for preparation of 1,2- and 1,3-amino alcohols, 1,2-diamines, 2,3-diaminoalkanoic acids and for synthesis of higher amino acids starting from simple amino acids.     

Vilsmeier formylation of 5,10,15-triphenylcorrole: expected and unusual products

5,10,15-Triphenylcorrole (1) reacts with the Vilsmeier reagent (POCl(3)/DMF) to give the corresponding 3-formyl derivative 3 as the major product. The regioselectivity of the reaction was proven by X-ray crystallography and only traces of the 2-formyl isomer were observed. A more polar product is also observed and this compound becomes the major product when an excess of DMF is used for the preparation of the Vilsmeier reagent, while the formation of the 3-formyl isomer is almost completely suppressed. X-ray crystallography allowed us to identify this compound as the fully substituted N-ethane bridged derivative 4, formed from the attack of the Vilsmeier reagent at the inner core of the macrocycle. This compound is unique among porphyrinoid macrocycles, and further confirms the peculiarity of corrole chemistry.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

Traceability and analytical chemistry

 The basic concepts of traceability as they are defined by the Comité Consultatif pour la Cluantité de Matière are contrasted with the practical exploitation in chemical analysis. The applicability of traceability concepts are tested for their practical applicability on four different analytical methodologies, neutron activation analysis, plasma mass spectrometry, beam microscopical analysis and speciation analysis of organometallic compounds. Received: 31 March 1998 · Accepted: 6 June 1998     

A multireference configuration interaction method based on the separated electron pair wave functions

A multireference configurational interaction method based on the separated electron pair (SEP) wave functions, SEP‐CI approach, has been developed as an approximation to the traditional CASSCF method. It differs from the CASSCF method in that active orbitals are obtained from the SEP wave function without further optimization in the subsequent CI calculations, and the active space is automatically constructed according to the occupation coefficients of SEP natural orbitals. These features make the present SEP‐CI method computationally much less demanding than the CASSCF method. The applicability of the SEP‐CI method is illustrated with sample calculations on the insertion reaction of BeH₂ and dissociation energies of LiH, BH, FH, H₂O, and N₂. © 2005 Wiley Periodicals, Inc. J Comput Chem 27: 39–47, 2006     

C_(59)F_(2n)HN(n=1,2)异构体的结构与稳定性的理论研究

分别用MNDO和AM1两种半经验方法,对C59F2nHN (n = 1, 2) 的异构体进行几何构型全优化,结合频率分析及HF/6-31G单点能计算,确定了各异构体的基态结构及其相对稳定性。计算结果表明,C59HN的F加成物的立体选择性规律与C60的不同,最稳定异构体不是1-2加成物。C59F2HN的最稳定异构体是1-4加成的6, 18-或12, 15-异构体; C59F4HN的最稳定异构体是1-4,1-4加成的6, 18; 12, 15-异构体,其能量远小于其它各异构体的能量。N原子取代碳笼骨架C原子后,改变了碳笼F加成物的立体选择性规律。     

Exploiting non-abelian point group symmetry in direct two-electron integral transformations

Summary A simple and general scheme to exploit any discrete point group symmetry in two-electron integral transformations is introduced. It has been implemented together with integral pre-screening techniques in direct two-electron integral transformations. Its application has also been extended to subsequent MO integral processing steps like MP2 or solution of the coupled-perturbed Hartree-Fock equations (CPHF). Timings for representative applications are presented.