Methacrylate modified clays and their polystyrene and poly(methyl methacrylate) nanocomposites

Two methacrylate‐modified clays have been prepared and used to produce nanocomposites of polystyrene and poly(methyl methacrylate) by in situ polymerization. These nanocomposites have been characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), cone calorimetry and the evaluation of mechanical properties. When the clay contains only a single methacrylate unit, the styrene system is exfoliated but methacrylate is intercalated. When two methacrylate units are present on the cation of the clay, both systems are exfoliated. TGA data show that the thermal stability of all the nanocomposites is improved, as expected. The relationships between the fire properties and nanostructure of the nanocomposites are complicated, as shown by cone calorimetry. The conclusions that one may reach using cone calorimetry do not completely agree with those from XRD and TEM. The evaluation of mechanical properties shows an increase in Young's modulus for all nanocomposites along with a decrease in elongation; tensile strength is decreased for methacrylate nanocomposites but increased for styrenics systems. Copyright © 2004 John Wiley & Sons, Ltd.     

α－甲基丙烯酸烯丙酯的合成及其自由基、阴离子聚合的研究

合成了α－甲基丙烯酸烯丙酯（ＡＭＡ），并对其自由基、阴离子聚合进行了探讨。结果发现，该单体难以进行选择性自由基聚合，但可用作多种单体自由基聚合的交联剂。用１，１′－二苯基己基锂在ＴＨＦ中引发ＡＭＡ，可顺利地进行α位双键的选择性阴离子聚合，分子量实测值与计算值基本一致。在较低温度下（≤－６０℃），可得窄分布ＰＡＭＡ（Ｍｗ／Ｍｎ＝１．１２～１．１５）。随聚合温度升高，间同和无规聚合物含量分别呈下降和上升趋势。ＧＰＣ、１ＨＮＭＲ及ＦＴＩＲ鉴定表明，用阴离子聚合法可得到溶于多种溶剂、每个重复单元上均定量带有烯丙基双键的窄分布官能性ＰＡＭＡ。     

Redox polymerization of 2-hydroxyethyl methacrylate (HEMA). I. Influence of surfactants on polymerization kinetics

Oxidation of ferrous orthophenanthroline (FeP) by peroxydiphosphate (PP) in aqueous medium at pH 1 was followed spectrophotometrically. Kinetic analysis has shown that oxidation occurs via the formation of an intermediate complex between FeP and PP. Equi-librium and rate constants were calculated. Influence of surfactants on the oxidation of FeP by PP was also Investigated. The equilibrium constant for complex formation was found to be higher in the presence of surfactants. The enhanced complex formation has been attributed to the ionic interactions between the charged surfactant and the ionic species in the reaction medium. Polymerization of HEMA initiated by the redox system,FeP/PP, was carried out in aqueous medium, under the conditions of excess reductant over oxidant and excess oxidant over reductant. The polymerization followed different mech-anisms under these conditions; with excess oxidant, the growing polymer radicals underwent oxidative termination, while with excess reductant, primary radical termination was pre-ferred. The effect of surfactants on the aqueous polymerization of HEMA using the redox system FeP/PP was also investigated. In addition to the decrease in rate, the polymerization followed a different mechanism in the presence of surfactants, the growing radicals ter-minated by mutual interaction. © 1995 John Wiley & Sons, Inc.     

Polymerization behavior of 2,2,6,6-tetramethylpiperidinyl methacrylate: A monomer carrying a hindered amine group

Copolymers of 2,2,6,6-tetramethylpiperidinyl methacrylate (TPMA) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–TPMA copolymers from feed ranging from 0.10–0.80 mole fractions TPMA and MMA-TPMA copolymers from feed of 0.04–0.85 mole fractions TPMA were used in the determination of monomer reactivity ratios r₁, r₂. Four different methods were employed in the calculations of r₁ and r₂ and all calculated results were in good agreement with each other. The structure of S–TPMA copolymers was inferred to be of an alternating nature while that of MMA–TPMA copolymers was random. Both copolymers are potential hindered amine light stabilizers (HALS) and are expected to be less extractable from, and more compatible with, polystyrene and poly(methyl methacrylate) base polymers.     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.     

Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

反胶束模板制备聚甲基丙烯酸甲酯/无机纳米粒子/石墨纳米复合材料及其表征

以甲基丙烯酸甲酯(MMA)和三氯甲烷(CHCl₃)为油相制备反胶束微乳液, 依靠表面活性剂十六烷基三甲基溴化铵(CTAB)自组装形成的“微反应器”作为模板成功地制备了PMMA/Eu(OH)₃/EG和PMMA/Ni(OH)₂/EG纳米复合材料. 并用红外光谱(IR)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)和差热-热重(TG-DTA)对该复合材料进行了表征和分析. 研究结果表明, 反胶束法可以有效地应用于有机-无机纳米复合材料的制备.     

Studies on bulk polymerization of methyl methacrylate. I. Thermal polymerization

The thermal bulk polymerization of methyl methacrylate (MMA) in a wide range of temperatures has been studied using a dilatometric reactor. It is shown that, irrespective of the care taken to purify the MMA, the evolution of the time-conversion curve can be explained only if we account for the presence of an impurity associated with the monomer acting as a free radical initiator. The activation energy for the decomposition of this impurity has been estimated as 98 kJ/mol. Having accounted for this impurity, the activation energy for the real thermal polymerization of the MMA has been estimated to be 75 kJ/mol. © 1993 John Wiley & Sons, Inc.     

Swelling equilibrium and preferential sorption of crosslinked poly(methyl methacrylate) in the mixture acetonitrile + n-butanol

Measurements of preferential sorption,( ₃), determined by refractometry, and swelling equilibrium, ₃ ^–1, of PMMA networks have been carried out in the cosolvent mixture MeCN+BuOH at 25 and 49 C. With an intermediate mixture composition, ₃ ^–1 passes through a maximum at both temperatures. At 25 C MeCN is preferentially adsorbed by the network over most of the composition range, but a small inversion is detected. At 49 C MeCN is preferentially adsorbed over all the composition range.The behavior of the system crosslinked PMMA/MeCN + BuOH is compared with the results obtained for solutions of linear PMMA in mixtures formed by the same two solvents, MeCN and BuOH.