Development of new solid-phase microextraction fibers by sol-gel technology for the determination of organophosphorus pesticide multiresidues in food

Allyloxy bisbenzo 16-crown-5 trimethoxysilane was first used as precursor to prepare the sol-gel-derived bisbenzo crown ether/hydroxyl-terminated silicone oil (OH-TSO) SPME coating. The coating procedure involving sol solution composition and conditioning process was presented. Compared with commercial SPME stationary phases, the new coatings showed higher extraction efficiency and therefore could provide higher sensitivity for organphosphorous pesticides (OPs). Limits of detection (LODs) were in the range of 0.003-1.0 ng/g for these OPs in food samples (honey, juice, orange and pakchoi). The optimal extraction conditions of the new coatings to OPs in these samples were investigated by adjusting extraction time, salt addition, extraction temperature, and dilution ratios of samples with distilled water by using SPME coupled with gas chromatography (GC)-flame photometric detection (FPD). The method was applied to determine the concentrations of OPs in real samples.     

A simple direct enzyme immunoassay of antibodies based on the differences in diffusion rates in a gel of a synthetic antigen and of its complex with antibodies

A simple direct enzyme immunoassay for semiquantitative detec tion of antibodies is suggested. It is based on the difference in diffusion rates in a gel for a synthetic low-mol-wt antigen and of its complexes with antibodies to be detected. Sensitivity and specificity of the devel oped assay are equal to an ELISA method. The assay has been tested with antibodies against HIV protein gp41 in rabbit serum. Possible applications and limitations of the method are discussed.     

碳氟链与碳氢链表面活性剂在固液界面上的吸附

全氟辛酸及其钠盐和十二烷基硫酸钠在R972上的吸附等温线均为S型或LS型，指示固液界面吸附过程中有表面疏水缔合物生成．碳氟表面活性剂的饱和吸附量显著高于碳氢表面活性剂的饱和吸附量．加电解质于液相使各体系吸附量上升．对于碳氟表面活性剂，甚至引起吸附等温线类型变化．例如，不加电解质时全氟辛酸在R972上的吸附等温线为S型，而加入HCl（c＝0．05mol·dm－3）使吸附等混线变成LS型．全氟辛酸比全氟辛酸钠在R972上的吸附更强．几种表面活性剂在R972上的吸附均随温度升高而减少。应用两阶段吸附模型及通用吸附等温线公式可以很好地解释所得实验结果．     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Thin-layer chromatography of 1,2,4-triazoles on silica gel

Summary The TLC behaviour of N-phenyl-1,2,4-triazoles and their derivatives on silica gel plates has been studied using simple solvents. Isomers were very well distinguished, resulting from different activities due to hydrogen bonding. A mixture of seven compounds has been resolved with diethylether-n-butylamine-pyridine (91.4:7.7:0.9).     

酞菁键合硅胶的制备及分离取代酞菁异构体

制备和表征了一种新的酞菁键合硅胶，三-β-(辛巯基)-β-(磺酰胺基)-酞菁铜键合硅胶。研究了该键合酞菁硅胶作为HPLC固定相的基本色谱性能。实验结果表明，该固定相可以分离四-α-(2，2，4-三甲基-3-戊氧基)酞菁(铜、镍)的4种异构体，也可以观察到四-α-(2，2，4-三甲基-3-戊氧基)无金属酞菁的4种异构体，而商业C₁₈(VERTEX Eurospher)却只能观察到两组峰，表明这种酞菁键合硅胶固定相在分析、分离一些取代酞菁异构体方面比商业C₁₈具有更好的分离效果。     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.