The stability of a non-extensive relativistic Fermi system

Based on the statistical theory of non-extensive relativity,and using theoretical analysis and numerical simulation,the non-extensive mechanical stability of ultra-relativistic free Fermi gas is investigated.The expressions of the stability conditions under high and low temperatures are given,and the mechanisms of the influences of temperature,ultrarelativistic effect,and non-extensive parameter q on stability are analysed.Our results show that at high temperature and under the condition of q < 1,the stability of a non-extensive system is weaker than that of an extensive system,and the relativistic effect reduces system stability as compared with a non-relativistic system.However,under the condition of q > 1,the stability of the non-extensive system is stronger than that of the extensive system,and the relativistic effect strengthens the system stability as compared with the non-relativistic system.In addition,under the condition of low temperature,the variation of the stability of the non-extensive system with temperature has a turning point.     

无氧铜的准等熵压缩性

 利用递变冲击阻抗材料叠合而成的组合飞片，在二级轻气炮上对无氧铜进行了准等熵压缩性测量，加载时间约达1 μs。用激光速度干涉仪连续记录了不同厚度处无氧铜样品自由面速度随时间的变化过程，并通过拉格朗日波分析技术计算得到40 GPa下的准等熵的应力-应变曲线。结果表明：在低应力区，无氧铜的准等熵压缩线位于冲击绝热线之上；到32 GPa以上，准等熵压缩线才回落到冲击绝热线之下。这个现象与Barker、Chhabildas等对铝与钨的实测现象是一致的，它表明：在低应力区，材料的冲击强化效应与加载速率密切相关。     

100～500 GPa 4.2Ni2.45Fe0.35CoW合金的冲击压缩性和物态方程

 用二级轻气炮驱动飞片技术及对称碰撞技术，测量了两相合金4.2Ni2.45Fe0.35CoW（以下简称93W）的雨贡纽线。其压力范围为100~500 GPa。实测的冲击波速度D和粒子速度u可用直线关系式D=4.008+1.277u (km/s)描述。实验结果与用混合物雨贡纽线叠加原理的计算结果符合甚好。文中还给出了由实验数据计算得到的物态方程数据。     

钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度研究

为探索钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度随撞击速度变化规律,利用二级轻气炮开展了?3.45 mm×10.5 mm的克级93 W钨合金柱形弹以1.82~3.66 km/s的速度撞击水泥砂浆靶的实验,利用CT图像诊断技术获得了侵彻深度和残余弹长随撞击速度的变化规律,对超高速撞击过程进行了数值模拟,结合数值模拟结果进一步分析了超高速撞击物理过程。结果表明:(1)超高速撞击条件下成坑是弹坑+弹洞型;(2)侵深-速度曲线呈现先增大后减小的现象,在弹速2.6 km/s附近存在侵彻深度极大值,约为8.5倍弹长,相对于中低速侵彻的深度并没有显著优势。(3)通过基于数值模拟得到的弹靶界面压力时程曲线将侵彻过程分为4个阶段,其中准定常侵彻阶段和第三侵彻阶段是决定总侵深的主要阶段。(4)随撞击速度增加,弹体侵蚀逐渐剧烈,此时准定常侵彻阶段的侵深变化不大,而第三侵彻阶段中的刚体侵彻部分大幅降低,导致总侵深大幅降低,使总侵深曲线呈现先增大后减小的现象。     

Effect of the interface on separation in multicapillary gas chromatography-based hyphenated techniques for speciation analysis of organometallic compounds

This paper reports the effect of transfer line (TL) internal diameter (i.d.) on gas chromatographic separation characteristics such as efficiency and speed, when a multicapillary (MC) column is used for speciation analysis of mercury. Five different TL consisting of fused-silica capillaries with 0.15, 0.20, 0.25, 0.32, and 0.53 mm i.d. are compared. The separation efficiency and total chromatographic run time are critically affected by the i.d. of the TL. Narrow capillaries (i.d.0.20 mm) produce minimum peak dispersion whereas wide capillaries result in narrow peaks and shorter chromatographic analysis times. A thermodynamic approach is proposed to describe the motion of the analytes through the separation column and TL. The model provides good agreement with the experimental data for high pressures (35 psig) and wide TL (0.25 mm i.d.).Dedicated to the memory of Wilhelm Fresenius     

Qualitative supercritical fluid extraction coupled to capillary gas chromatography

The usefulness and ease of utilizing supercritical fluid extraction (SFE) directly coupled to capillary gas chromatography (GC) as quantitative or qualitative analytical problem-solving tools will be demonstrated. As an alternative to conventional liquid solvent extractions, SFE presents itself as a means to achieve high extraction efficiencies of different compounds in complex solid matrices in very rapid tims frames. Moreover, SFE has an additional advantage of being able to achieve distinct extraction selectivities as a function of the solubilizing power of the supercritical fluid extracting phase. For on-line SFE/GC, the extraction effluent is directly transferred to the analytical chromatograph. On-line SFE/GC involves the decompression of pressurized extraction effluent directly into a heated, unmodified capillary split injection port of the GC. In this respect, SFE introduction into GC can be used as an alternative means of GC injection, comparable to such modes of injection as pyrolysis and thermal desorption. This paper will show applications of SFE/GC where mass spectrometric detection together with flame ionization detection was used for component identification from environmental, tobacco, and petroleum matrices.     

气相色谱-质谱法测定热塑性弹性体中的多环芳烃

建立了一种简单、准确的测定热塑性弹性体中16种多环芳烃(PAHs)的气相色谱-质谱(GC-MS)方法。考察了样品制备、萃取溶剂、萃取方法、时间以及温度对厂家制备的阳性热塑性弹性体样品中PAHs提取效率的影响,确定了萃取条件和方法。样品经甲苯超声萃取、浓缩后用环己烷溶解、二甲亚砜液液萃取净化后采用GC-MS进行分析,内标法定量。通过对不同材质阳性热塑性弹性体样品的加标回收、精密度试验等对建立的方法进行评价,16种PAHs的平均回收率为70%～117%,精密度为0.2%～10.8%。该方法适合于热塑性弹性体中PAHs的测定。     

Antifouling ultrafiltration membrane composed of polyethersulfone and sulfobetaine copolymer

A new random copolymer was synthesized by reacting hydrophilic N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) (DMMSA) with hydrophobic butyl methacrylate (BMA) through a conventional radical polymerization. The as-prepared sulfobetaine copolymer (DMMSA–BMA) was blended with polyethersulfone (PES) to fabricate antifouling ultrafiltration membrane for BSA separation. The X-ray photoelectron spectroscopy analysis of blend membranes revealed concentration of sulfobetaine groups at the membrane surfaces that endowed the membrane with higher hydrophilicity and better antifouling property. For the membrane with 8.0 wt% DMMSA–BMA copolymer concentration (No. 5), irreversible fouling has been considerably reduced and the flux recovery rate of the blend membrane reached as high as 82.8%. Furthermore, the blend membrane could effectively resist BSA fouling in a wide pH range from 4.0 to 8.0.