A model of melting of rare gases within bubbles of crystalline metal matrix

Abstract

On the basis of experimental results obtained in the present and some other works a model of melting of rare gas solids within bubbles formed in a crystalline metal matrix as a result of ion implantation is proposed. Rare gas solid is supposed to melt on heating at the expense of the bubble volume expansion by emission of a dislocation loop. On this basis the melting temperature can be estimated as one which is enough to provide for a pressure inside a bubble sufficient for the initiation of the dislocation loop punching. Values of melting temperatures obtained in this way are in good agreement with available experimental data.     

Book reviews

This work is a thorough investigation on the major operating parameters of the programmable temperature vaporisation (PTV) inlet used for gas chromatographic injection, including injection mode and volume, inlet temperature, vent and purge flow rates. The results clearly demonstrate the advantage of large volume injection in enhancing the detection of polybrominated diphenyl ethers (PBDEs). Partial loss of injected PBDEs occurred during solvent venting and due to incomplete sample transfer. Such loss was minimised by lowering the initial inlet temperature and vent flow and elevating the final inlet temperature. The results show that 50 mL/min vent flow, as low as 0°C initial and higher than 300°C final inlet temperatures produced the relatively high responses. Two mass spectrometric parameters were also evaluated. Indoor dust, lake sediment and human placenta tissue samples were analysed to demonstrate reliability and sensitivity improvement of the PTV large volume injection.     

Analysis of PCBs in Biotic Matrices by Two-Dimensional GC-ECD

Abstract

The suitability of three GC-ECD systems for the separation of a model mixture containing various congeners of PCBs together with persistent chlorinated aromatics (pesticides and their metabolites, industrial chemicals) was tested. Analyses were performed on two parallel capillaries, the stationary phase of one of them was always in routine practice very common 5% phenyl-methylpolysiloxane, the second one was either 50% phenylmethylpolysiloxane or 7% phenyl-7% cyanopropyl-methylpolysiloxane. The number of unresolved (coeluted) analytes was significantly reduced in these systems and thus unbiased quantitation of PCBs and other components used for regulation was possible. The utilization of this type of multidimensional chromatography for rapid and reliable analysis of real samples (fish oil, human fat) was documented.     

Conventional processes and membrane technology for carbon dioxide removal from natural gas:A review

Membrane technology is becoming more important for CO 2 separation from natural gas in the new era due to its process simplicity,relative ease of operation and control,compact,and easy to scale up as compared with conventional processes.Conventional processes such as absorption and adsorption for CO 2 separation from natural gas are generally more energy demanding and costly for both operation and maintenance.Polymeric membranes are the current commercial membranes used for CO 2 separation from natural gas.However,polymeric membranes possess drawbacks such as low permeability and selectivity,plasticization at high temperatures,as well as insufficient thermal and chemical stability.The shortcomings of commercial polymeric membranes have motivated researchers to opt for other alternatives,especially inorganic membranes due to their higher thermal stability,good chemical resistance to solvents,high mechanical strength and long lifetime.Surface modifications can be utilized in inorganic membranes to further enhance the selectivity,permeability or catalytic activities of the membrane.This paper is to provide a comprehensive review on gas separation,comparing membrane technology with other conventional methods of recovering CO 2 from natural gas,challenges of current commercial polymeric membranes and inorganic membranes for CO 2 removal and membrane surface modification for improved selectivity.     

Electron Capture Determination of Propoxyphene from Human Plasma

Abstract

A procedure for the determination of propoxyphene (α-d-dimethylamino-1, 2 -diphenyl-3 -methyl-2 -propionoxybutane) in plasma is reported. The method is based on the electron capture characteristics of propoxyphene. The plasma is rendered basic to generate the free amine and extracted with ether. The extract is analyzed by gas chromatography using a 4 foot OV-225 column. An internal standard of imipramine hydrochloride is used to quantitate the propoxyphene. This internal standard is carried through the entire procedure. The ratio of the peak heights of propoxyphene to imipramine is compared to ratios obtained from standards placed in plasma and treated in the same manner as the samples. Six subjects were given propoxyphene at different time intervals, and the data are presented concerning these subjects.     

Separation and Analysis of o.p'-DDD and its Lipophilic Metabolite,O.P'-DDE,in Tissue,Faeces and Plasma

Abstract

An analytical procedure based on electron capture gas chromatography for the determination of o,p′-DDD, a drug used for the treatment of Cushing′s syndrome, is presented. Detection of a metabolite, identified as o,p′-DDE, is also described.     

Rate processes on fractals: Theory,simulations, and experiments

Heterogeneous kinetics are shown to differ drastically from homogeneous kinetics. For the elementary reaction A + A products we show that the diffusion-limited reaction rate is proportional tot ^– h[A]² or to [A]^x, whereh=1- d _s/2, X=1+2/d _s =(h-2)(h-1), andd _s is the effective spectral dimension. We note that ford = d _s =1, h =1/2 andX = 3, for percolating clustersd _s = 4/3,h = 1/3 andX = 5/2, while for dust ds <1, 1 >h > 1/2 and >X > 3. Scaling arguments, supercomputer simulations and experiments give a consistent picture. The interplay of energetic and geometric heterogeneity results in fractal-like kinetics and is relevant to excitation fusion experiments in porous membranes, films, and polymeric glasses. However, in isotopic mixed crystals, the geometric fractal nature (percolation clusters) dominates.