Thermolysis of furoxans annulated with five-membered carbocycles in the presence of dipolarophiles

The conditions for the thermolysis of furoxans annulated with differently strained five-membered carbocycles (cyclopentafuroxan 1, norbornenofuroxan 2, and acenaphthofuroxan 3) to bis(nitrile oxides) in the presence of various dipolarophiles (diethyl acetylenedicarboxylate, benzoylformonitrile, and ethoxycarbonylformonitrile) were optimized. It was found that the reactivities of the above furoxans as sources of bis(nitrile oxides) decrease in the order 2 > 1 > 3. Among the furoxans studied, only norbornenofuroxan 2 can be recommended as a possible cross-linking reagent for polymers. The formation of di-N-oxides of 3,4-bis(cyanopropyl)-, 3,4-bis(cyanocyclopentyl)-, and 3,4-bis(cyanonaphthyl)furoxans was detected. They resulted from intermolecular cyclodimerization of bis(nitrile oxides) initially formed in the thermolysis of furoxans 1–3. Dedicated to Academician V. A. Tartakovsky on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1521–1528, August, 2007.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Nanorods of Various Oxides and Hierarchically Structured Mesoporous Silica by Sol-Gel Electrophoresis

In this paper, we report the template-based growth of nanorods of oxides and hierarchically structured mesoporous silica, formed by means of a combination of sol-gel processing and electrophoretic deposition. Both single metal oxides (TiO₂) and complex oxides (Pb(Zr_0.52Ti_0.48)O₃) have been grown by this method. This method has also been applied to the growth of nanorods of mesoporous silica having an ordered pore structure, where the pores are aligned parallel to the long axis of the nanorod. Uniformly sized nanorods of about 125–200 nm in diameter and 10 m in length were grown over large areas with near unidirectional alignment. Appropriate sol preparation yielded the desired stoichiometric chemical composition and crystal structure of the oxide nanorods, with a heat treatment (500–700°C for 15–30 min) for crystallization, densification and any necessary pyrolysis.     

Zur Kristallstruktur von CaLaAl3O7 und CaLaGa3−xAlxO7 (x = 0,66)

On the Crystal Structure of CaLaAl₃O₇ and CaLaGa_3?xAl_xO₇ (x = 0.66) Single crystals of (I): CaLaAl₃O₇ and (II): CaLaGa_2.34Al_0.66O₇ were grown from molten oxide mixtures and investigated by single crystal X-ray technique. Both compounds crystallize with tetragonal symmetry, space group D? P4 2₁m, (I): a = 7.8075; c = 5.1564 Å, (II): a = 7.9130, c = 5.2360 Å, Z = 2 and are isostructural with the Melilites. The crystal structure is discussed.     

7-(对甲酰基苯偶氮)-8-羟基喹啉-5-磺酸的合成及其双波长分光光度法测定镓

7－（对甲酰基苯偶氮）－8－羟基喹啉－5－磺酸是一新显色剂。该试剂在微碱性介质中（pH＝7．5）与镓形成黄色络合物。络合物λmax＝392nm，摩尔吸光系数ε392＝2．24×104L·mol-1·cm-1。同时在500nm呈现负峰，用双峰观波长法测定镓ε392～500＝6．89×104L·mol-1·cm－1，灵敏度是单波长法的三倍多．线性范围0～2．0×10－5mol／L。用拟定的方法测定了掺硅的GaAS材料及岩石中的镓，加入回收率为106％～110％；方法的相对标准偏差小于1．6％。     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.     

Effect of the ZnNi y Mn2– y O4 (0 ≤ y ≤ 1) spinel composition on electrochemical lithium insertion

The electrochemical insertion of lithium in the spinel-type manganite with the formula ZnNi _y Mn_{2– y} O₄ has been studied. The galvanostatic discharge curves show that the best performance is obtained for y = 0.25, where a tetragonal to cubic structural transformation occurs. The thermodynamics and kinetics of the process of insertion of the lithium into the tetragonal spinel Li _x ZnNi_0.25Mn_1.75O₄ (x = 0.05–1.3) have been studied. The molar thermodynamic quantities, such as enthalpy, entropy and free energy determined by EMF-T measurements, varied with the lithium concentration in the oxide structure, and a major variation was observed around x = 0.8. The chemical diffusion coefficient of lithium in these spinels was also determined. Structural analysis, degree of oxidation and magnetic susceptibility measurements were carried out for the lithiated oxides in order to obtain the cationic distribution as a function of x. It has been possible to demonstrate that, upon lithium insertion, Mn⁴⁺ ions on B sites are reduced to Mn³⁺ and then to Mn²⁺. A cooperative Jahn-Teller effect is present in these spinel manganese-nickel oxides. Received: 4 February 1997 / Accepted: 11 April 1997     

Electrocatalytic activity of dispersed platinum and silver alloys and manganese oxides for the oxygen reduction in alkaline electrolyte

This work reviews the studies conducted in this laboratory of the oxygen reduction reaction (ORR) on electrocatalysts formed by Pt-M/C (M = V, Cr, Co) and Ag-Pt/C alloys and on different Mn oxides (MnO/C, Mn₃O₄/C, MnO₂/C) in KOH electrolyte. The physical and electronic properties of the materials are investigated by in situ XAS (x-ray absorption spectroscopy) in the XANES (x-ray absorption near edge structure) region. The electrocatalytic activity for the ORR on the different catalysts is compared through mass-transport-corrected Tafel plots. The XANES results for the Pt-M/C and Ag-Pt/C composites at high electrode potentials show lower vacancy of the Pt 5d band compared to pure Pt/C, while for the results indicate a chance of the Mn oxidation state as a function of the electrode potential. The electrochemical measurements evidence increased electrocatalytic activity of the Pt alloys compared to pure Pt and this is attributed to a lowering of the adsorption strength of adsorbed oxygen species caused by the reduced Pt reactivity. An activity enhancement of the Ag atoms on the Ag-Pt/C alloys compared to pure Ag is ascribed to an electronic effect induced by the presence of Pt, increasing the Ag-O adsorption strength. In the case of the Mn_yO_x/C materials, the electrochemical results show low activity for MnO/C and higher activity for MnO₂/C and Mn₃O₄/C. This is explained based on the activation for the ORR, which is higher for the material with higher MnO₂ contents and the occurrence of a mediation processes involving the reduction of Mn(IV) to Mn(III), followed by the electron transfer of Mn(III) to oxygen. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 12, pp. 1417–1426. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.