Effect of dose rate of gamma irradiation on biochemical quality and browning of mushrooms Agaricus bisporus

In order to enhance the shelf-life of edible mature mushrooms Agaricus bisporus, 2 kGy ionising treatments were applied at two different dose rates: 4.5 kGy/h (I⁻) and 32 kGy/h (I⁺). Both I⁺ and I⁻ showed 2 and 4 days shelf-life enhancement compared to the control (C). Before day 9, no significant difference (p>0.05) in L^* value was detected in irradiated mushrooms. However, after day 9, the highest observed L^* value (whiteness) was obtained for the mushrooms irradiated in I⁻. Analyses of phenolic compounds revealed that mushrooms in I⁻ contained more phenols than I⁺ and C, the latter containing the lower level of phenols. The polyphenol oxidase (PPO) activities of irradiated mushrooms, analysed via catechol oxidase and dopa oxidase substrates, resulted in being significantly lowered (p0.05) compared to C, with a further decrease in I⁺. Analyses of the enzymes indicated that PPO activity was lower in I⁺, contrasting with its lower phenol concentration. Ionising treatments also increased significantly (p0.05) the phenylalanine ammonia-lyase (PAL) activity. The observation of mushrooms cellular membranes, by electronic microscopy, revealed a better preserved integrity in I⁻ than in I⁺. It is thus assumed that the browning effect observed in I⁺ was caused by both the decompartimentation of vacuolar phenol and by the entry of molecular oxygen into the cell cytoplasm. The synergetic effect of the residual active PPO and the molecular oxygen, in contact with the phenols, allowed an increased oxidation rate and, therefore, a more pronounced browning in I⁺ than in I⁻.     

Amperometric glucose biosensor based on electrodeposition of platinum nanoparticles onto covalently immobilized carbon nanotube electrode

A new amperometric biosensor for glucose was developed based on adsorption of glucose oxidase (GOx) at the gold and platinum nanoparticles-modified carbon nanotube (CNT) electrode. CNTs were covalently immobilized on gold electrode via carbodiimide chemistry by forming amide linkages between carboxylic acid groups on the CNTs and amine residues of cysteamine self-assembled monolayer (SAM). The fabricated GOx/Au_nano/Pt_nano/CNT electrode was covered with a thin layer of Nafion to avoid the loss of GOx in determination and to improve the anti-interferent ability. The immobilization of CNTs on the gold electrode was characterized by quartz crystal microbalance technique. The morphologies of the CNT/gold and Pt_nano/CNT/gold electrodes have been investigated by scanning electron microscopy (SEM), and the electrochemical performance of the gold, CNT/gold, Pt_nano/gold and Pt_nano/CNT/gold electrodes has also been studied by amperometric method. In addition, effects of electrodeposition time of Pt nanoparticles, pH value, applied potential and electroactive interferents on the amperometric response of the sensor were discussed.

The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for glucose in the absence of a mediator. The linear range was from 0.5 to 17.5 mM with correction coefficient of 0.996. The biosensor had good reproducibility and stability for the determination of glucose.     

A comparison of the mechanism for the reductive half-reaction between pea seedling and other copper amine oxidases (CAOs)

In a previous DFT study a mechanism for the reductive half-reaction of pea seedling amine oxidase (PSAO) was suggested. In many of the suggested steps a lysine at the active site plays an important role. However, this lysine is not found in other amine oxidases. The primary aim of the present DFT study is therefore to investigate alternative mechanisms for those amine oxidases (CAO) where the lysine residue is not present. One of the most important roles suggested for the lysine in PSAO was to protonate the O2-site of TPQ before the critical Cbond;H bond cleavage of the substrate. In the absence of lysine the O2-site of TPQ is now suggested to be protonated by a water ligand on the copper metal complex, in line with experimental suggestions. In other steps the role of lysine is taken over by an asparagine. All results are compared with experimental observations and good agreement is generally found.     

Acridinium ester chemiluminescence: pH dependent hydrolysis of reagents and flow injection analysis of hydrogen peroxide and glutamate

An automated analysis system is described for the measurement of hydrogen peroxide based on a chemiluminescence reaction with phenyl 10-methylacridinium-9-carboxylate (PMAC). A reversed FIA experimental arrangement is used to establish the operating conditions for the measurement of submicromolar levels of hydrogen peroxide. The carrier stream consists of hydrogen peroxide standards prepared in a pH 9.0, boric acid buffer and the flow rate for this carrier/sample stream is 4 ml/min. Twenty microliters of a 10 mM PMAC solution, prepared in a pH 3 phosphate buffer, are injected into the carrier/sample stream. Hydrogen peroxide mixes with the PMAC reagent in an incubation coil that is constructed by wrapping 107 cm of polyethylene tubing around a 1 cm o.d. plastic rod. The chemiluminescence reaction is then initiated by adding base just before the sample passes in front of a photomultiplier tube (PMT) detector. The calculated limit of detection (S/N = 3) for hydrogen peroxide is 0.25 M. In addition, the pH dependent hydrolysis of the PMAC reagent is characterized by an HPLC method which has been specifically developed for the separation and detection of the hydrolysis products of PMAC. Results indicate that a pH of 3.0 is required for long term stability of the PMAC reagent. Finally, this system has been successfully extended to the measurement of glutamate by coupling a bioreactor column of glutamate oxidase with the hydrogen peroxide detection scheme. A detection limit (S/N = 3) of 0.5 M has been established for glutamate with a throughput of 200 samples per hour.     

Intracellular fate of hydrocarbons

In previous work, purification procedures and zymogram analysis conducted with supernatants of crude extracts from aerobic mycelium of the YR-1 strain of Mucor circinelloides isolated from petroleum-contaminated soils indicated the existence of only one soluble alcohol oxidase (sAO) activity. In the present work enzymatic activity of alcohol oxidase (AO) was also detected in the mixed membrane fraction (MMF) of a high-speed centrifugation procedure after drastic ballistic cellular homogenization to break the mycelium from strain YR-1. When mycelial cells were gently broken by freezing the mycelium with liquid nitrogen, smashing in a mortar, and submitting the samples to an isopycnic sucrose gradients (10–60% sucrose), AO activity was detected in particular and discrete fractions of the gradient, showing specific density values quite different from the density of peroxisomes. The results suggest that there could be a different intracellular pattern of distribution of the microsomal fraction in aerobically grown mycelium depending on the carbon source used in the culture media, including alcohols and hydrocarbons, but not in glucose. In working with particulate fractions, we found two AO activities: a new membrane alcohol oxidase (mAO) activity and the sAO. Both activities appear to be located in the inner of the cells in specific compartments different from the peroxisomes, so mAO could be in the membrane of these compartments and sAO in the lumen of the vesicles. We also assayed other enzymatic activities involved in hydrocarbon biodegradation to establish its intracellular location and other enzymatic activities such as peroxidase to use them as intracellular markers of different organelles. In the case of monooxygenase, the first enzymatic step in the hydrocarbon biodegradation pathway, its location was in the same fractions where AOs were located, suggesting the existance of a specific organelle that contains the enzymatic activities involved in hydrocarbon biodegradation.     

Development of an Amperometric Biosensor for β‐N‐Oxalyl‐L‐α,β‐Diaminopropionic Acid (β‐ODAP)

An amperometric method for the determination of the neurotoxic amino acid β‐N‐oxalyl‐L ‐α,β‐diaminopropionic acid (β‐ODAP) using a screen printed carbon electrode (SPCE) is reported. The electrode material was bulk‐modified with manganese dioxide and used as a detector in flow injection analysis (FIA). The enzyme glutamate oxidase (GlOx) was immobilized in a Nafion‐film on the electrode surface. The performance of the biosensor was optimized using glutamate as an analyte. Optimum parameters were found as: operational potential 440 mV (vs. Ag/AgCl), flow rate 0.2 mL min^?1, and carrier composition 0.1 mol L^?1 phosphate buffer (pH 7.75). The same conditions were used for the determination of β‐ODAP. The signal was linear within the concentration range 53–855 μmol L^?1 glutamate and 195–1950 μmol L^?1 β‐ODAP. Detection limits (as 3σ value) for both analytes were 9.12 and 111.0 μmol L^?1, respectively, with corresponding relative standard deviations of 3.3 and 4.5%. The biosensor retained more than 73% of its activity after 40 days of on‐line use.     

STUDIES ON IMMOBILIZED GLUCOSE OXIDASE BY DIETHYLAMINOETHYL CELLULOSE COMPLEXES

The properties of immobilized glucose oxidase (GOD) by the complexes of diethylaminoethyl cellulose(DEAEC) with different polymers, such as polymethylacrylic acid (PMAA), polyacrylic acid (PAA), polystyrene sulfonic acid (PSSA), polyvinylaleohol (PVA), polyethylene oxide (PEO) and styrene-maleic acid copolymer (PSMA) were investigated. The activity of immobilized GOD was obviously influenced by the component of the DEAEC complexes. The relative activity of the immobilized GOD reached to maximum and over 90% of the native GOD. when the DEAEC-PMAA DEAEC-PAA complexes were used as a carrier with the molar ratio of DEAEC and polyacid of about one. Michaelis constants (Km) of the immobilized enzymes of DEAEC-GOD-PMAA and DEAEC-GOD-PAA were determined to be 1.25 and 1.00, respectively. Moreover, the immobilized GOD has a good storage stability and cyclic life.     

Production ofL-glutamate oxidase andin situ monitoring of oxygen uptake in solid state fermentation ofstreptomyces sp. Nl

Effects of water content and carbon and nitrogen sources on the production ofL-glutamate oxidase (GOD) by solid state fermentation (SSF) ofStreptomyces sp. N₁ were investigated in a 250-mL shake flask. The results show that in the solid medium containing wheat bran 98% (w/w), KCl 0.2% (w/w), and MgCl₂ 0.2% (w/w), addition of 2.0-mL water per gram solid medium and 0.4% (w/w) (NH₄)₂SO₄ was the best for GOD production. In this work, we also developed a simple technique forin situ measuring oxygen uptake rate (OUR) and carbon dioxide evolution rate (CER) in SSF in a shake flask based on the principle of Warburg manometer. The method was successfully applied to determine OUR and CER values in SSF ofStreptomyces sp. N₁. The results indicate that the largest OUR value was detected about one or two days ahead of the highest GOD activity reached depending on the fermentation conditions, and the OUR may be used as anin situ indicator of GOD production in the SSF process.     

偶联酶催化分光光度法测定黄嘌呤

研究了以黄嘌呤氧化酶-辣根过氧化物酶-苯酚-4-氨基安替比林反应为显色体系测定不同样液中黄嘌呤浓度的新方法。确定该测定方法的最佳反应条件为:黄嘌呤氧化酶(XO)0·32U/mL,辣根过氧化物酶(HRP)7·0U/mL,4-氨基安替比林(AAP)1mmol/L,苯酚(PA)6mmol/L溶于100mmol/LTris-HCl缓冲液(pH8·4);反应温度为37℃,保温时间为20min;检测波长为508nm。本方法测定黄嘌呤浓度的线性范围为0·2～10·0mmol/L,线性关系良好(R=0·9978),检测限为0·05mmol/L。方法操作简单易行,测定结果准确可靠,可有效应用于普通实验室和常规临床血液生化检测。     

Production of α-keto acids Part I. Immobilized cells ofTrigonopsis variabilis containing D-amino acid oxidase

Whole cells ofTrigonopsis variabilis were immobilized by entrapment in Ca²⁺-alginate and used for the production of α-keto acids from the corresponding D-amino acids. The D-amino acid oxidase within the immobilized cells has a broad substrate specificity. Hydrogen peroxide formed in the enzymatic reaction was efficiently hydrolyzed by manganese oxide co-immobilized with the cells. The amino acid oxidase activity was assayed with a new method based on reversed-phase HPLC. Oxygen requirements, bead size, concentration of cells in the beads, flow rate, and other factors were investigated in a “ trickle-bed ” reactor.