Simultaneous Chiral Separation of Geometry Isomers and Enantiomers of Nateglinide by Capillary Electrophoresis with Mixture of CD Derivations as Chiral Selector

Abstract

A capillary electrophoresis (CE) method for the simultaneous separation of geometry isomers and enantiomers of nateglinide was built. Several different dyclodextrin (CD) derivatives were tested for the chiral separation of nateglinide, and it was proved that ionic CDs [i.e., carboxymethy-β-CD (CM-β-CD) and sulphonic-β-CD (S-β-CD)] could show better chiral selectivity for both geometry isomers and enantiomers than the neutral CDs. The separation of geometry of both isomers and enantiomers of nateglinide was obtained by CE in a 75-µm i.d. × 60 cm (effective length 45 cm) fused-silica capillary at 11 kV voltage, while 30 mM phosphate (pH = 8.38) acted as running buffer and a mixture of 40 mM S-β-CD + 21 mM CM-β-CD served as chiral selector. The detective wavelength was set at 254 nm.     

杂多阴离子[GeMo12O40]4-α/β异构体的密度泛函研究

采用密度泛函方法，在DND基组水平上，对[GeMo12O40]^4-杂多阴离子最常见的α和β异构体进行了几何构型优化，得到了与X射线晶体衍射实验结果相一致的结构参数，并在此基础上进行了振动频率分析，得到了杂多阴离子的电子结构、热力学特性和振动光谱，通过定义α，β异构体异构化反应的Gibbs函变△Gα-β与温度的关系，研究了这两种异构体的相对稳定性．结果表明：低温时α异构体更稳定，高温时β异构体更稳定些，550K左右为转变点．振动频率分析得到2种异构体的最强峰位于4个频率位置，分别指认为vax(Mo-Od)，vas(Mo-Od)，vas(Mo-Oc-Mo)，vas(Ge-Oa)，vas(Mo-Ob-Mo)振动，与红外光谱(IR)的特征振动峰相对应，观察到了特征频率的振动模式，从理论计算角度说明了Rocchiccioli—Deltcheff关于振动模式的设想是合理的．     

铝镓取代的钨硅杂多配合物位置异构体的合成表征及催化性能

合成了通式为Ｋ５－ｎＨｎ［α－，βｉ－ＳｉＷ１１Ｍ（Ｈ２Ｏ）Ｏ３９］·ｘＨ２Ｏ（Ｍ＝Ａｌ，Ｇａ，βｉ＝β１，β２，β３）的八种异构体。通过元素分析、红外光谱和紫外光谱、极谱和循环伏安、２７Ａｌ和１８３Ｗ核磁共振、Ｘ光电子能谱等方法进行了表征。所合成的各异构体在催化以Ｈ２Ｏ２为氧化剂的顺丁烯二酸环氧化反应中，β３异构体具有最高的催化活性     

C120异构富勒烯分子的AM1半经验量子化学研究

以哑铃状2C60聚合体、花生壳状2C60聚合体以及C120富勒烯分子为研究对象,采用AM1半经验量子化学方法,计算了3种C120异构富勒烯分子的几何构型、电子结构、分子能量、疏水常数、极化率与偶极矩;然后,根据计算结果,分析对比了3种C120异构体分子的化学稳定性与物理化学特性.研究结果表明,3种C120分子的形成均为吸热反应,它们的稳定性排序为:C120富勒烯>花生壳状2C60>哑铃状2C60分子.     

HSCCS自由基势能面的理论研究

在CCSD(T)/6-311G(d,f)//MP2/6-311G(d,f) ZPE水平下,计算得到含有8个异构体和11个过渡态的HSCCS自由基体系势能面,讨论了异构体的结构与稳定性及异构体之间的异构化过程.结果表明异构体m1的能量最低,除m1以外,异构体m2和m3的能量也比较低,在MP2水平上,过渡态TS1的能量比异构体m2仅高3.9kJ/mol,而在CCSD(T)水平上,TS1的能量比m2低14.6 kJ/mol,这说明异构体m2可以迅速转化为能量更低的m1.异构体m3的能量比异构体m1高49.99 kJ/mol,可以推断,在合适的实验条件下可以观测到异构体m1.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

混合型烷基键合硅胶液相色谱固定相的合成与性能评价

多环芳烃;取代基位置异构体;混合型烷基键合硅胶液相色谱固定相的合成与性能评价     

Chiral separations by capillary electromigration techniques in nonaqueous media. I. Enantioselective nonaqueous capillary electrophoresis

Enantiomer separations by CE employing nonaqueous conditions are reviewed. The general focus of this article is directed towards solvent effects on chiral recognition and the separation mechanism. After a general discussion of solvent effects on the individual processes involved in CE enantiomer separation, specifics for various selector classes are discussed together with a few applications of enantioselective nonaqueous CE.     

Study of the influence of isomerism on the curing properties of the epoxy system DGEBA (n=0)/1,2 DCH by DEA and MDSC

Summary Modulated differential scanning calorimetry (MDSC) and dielectric analysis (DEA) have been used to characterize the cure process of the system diglycidyl ether of bisphenol A (DGEBA(n=0)/1,2 diaminocyclohexane (1,2 DCH). The trans isomer and a mixture cis/trans(30-70% respectively) of 1,2 DCH were used to find their different behaviour. The study allowed to check the influence of the cisisomer on the thermoset curing process. Gelation times were obtained through the equation proposed by Johari and vitrification times from the point of inflection of the complex calorific capacity modulus.     

Analysis on First-stage Ignition of n-Heptane at Low Temperatures with a Lumped Skeletal Mechanism

Two-stage ignition exists in the low-temperature combustion process of n-heptane and the first-stage ignition also shows a negative temperature coefficient(NTC) phenomenon. To study key reactions and understand chemical principles affecting the first-stage ignition of n-heptane, a lumped skeletal mechanism with 62 species is obtained based on the detailed NUIGMech1.0 mechanism using the directed relation graph method assisted by sensitivity analysis and isomer lumping. The lumped mechanism shows good performance on ignition delay time under wide conditions. The study revealed that the temperature after the first-stage ignition is higher and a larger amount of fuel is consumed at lower initial temperatures. The temperature at the first-stage ignition is relatively insensitive to the initial temperature. Further sensitivity analysis and reaction path analysis carried out based on the lumped mechanism show that the decomposition of RO₂ to produce alkene and HO₂is the most important reaction to inhibit the first-stage ignitions. The chain branching explosion closely related to the first-stage ignition will be terminated when the rate constant for the RO₂ decomposition is larger than that of the isomerization of RO₂ to produce QOOH. The NTC behavior as well as other characteristics of the first-stage ignition can be rationalized from the competition between these two reactions.